1. TS Moly Specialty Lubricants for the Offshore Industry
Riser & BOP Bolts, Mud Pumps, Top Drives, Jacking System, Skidding, Gate Valves, Sheaves and Wire Ropes
TS-70 Moly Paste is a thread compound with 70%
molybdenum disulphide, NLGI No.2, especially suitable for
wet or corrosive conditions, including subsea applications.
It has highly consistent torque values for makeup and
breakout. TS-70 is a general purpose moly paste with
many uses. It has proven to be an outstanding lubricant for
a saltwater environment, above and below the surface:
subsea riser, BOP, flange equipment and structural bolts.
TS-90 Moly Gear Concentrate is an additive for all types
of gear oils to lower friction and improve the film-forming
capabilities of the oil. (Mix 1:10).TS-90 is made from a
blend of high-quality polymers and moly. When added to
finished oil, it coats all surfaces with a tough, slippery film.
The polymers help the oil to withstand higher loads than
normal. Friction is reduced, allowing moving surfaces to
operate smoother and quieter under varying load
conditions. Lower friction reduces operating temperatures.
TS-90 Moly Gear Concentrate is very resistant to
degradation by high shear. The moly also substantially
reduces friction and improves the extreme pressure, load
carrying and anti-wear capabilities of gear oils.
Equipment
Suggested Lubricants
Mud Pumps Gear Box
TS-90
Bolts all equipmments
TS-70
Jacking System
Primary Gear Box
TS-90 or TS-319
Secondart Gear Box
TS-90 or TS-319
Pinion Gear Shaft
TS-65 or Ts-333
Rack
Hydraulic Power Slip
TS-210 or TS-209
TS-210 or TS-209
Riseer tensioners wire rope
TS-210
Breech-Clock style riser connection
TS-63
Crown Block Sheave
TS-116
Drill String Compensator pin
TS-70
Top Drive
TS-90
TS-115 Corrosion Control Grease is a multipurpose, high
temperature bearing and machinery grease for industrial
applications where salt water, acid vapors, or chemicals
cause corrosion. It has a high melting point, over 500
degrees F, and resists water washout.
Agitator
TS-90
Cantilever Skid Rails
TS-264
TS-209-0 O.G.L. Outside Gear Lubricant is an inorganic
thickened, heavy duty, extreme pressure grease designed
for spur and bull or rack and pinion gears with heavily
loaded slow moving gears. Resistant to water wash-out,
TS-209-0 is a multi-purpose grease for open gears that are
heavily loaded and exposed to wind, rain, snow, sun, etc.
Excellent in a salt water environment.
BOP Transporter (Skidding Type)
TS-264
Packing of swivel wash pipe assembly
TS-66V
Chains
TS-602 or TS-65
TS-65 Multi Purpose Moly Grease is a multipurpose,
semi-synthetic inorganic wheel bearing and chassis grease
with moly. It is water insoluble and withstands high
temperatures. TS-65 is an extreme pressure grease
making it suitable for heavy duty industrial uses. Available
in NLGI#2.
Wash Pipe
TS-801 or TS210
Wire Ropes
TS-65 or TS-210
Anchor Winch
TS-65 or TS-116
Fixation System
TS-210 or TS-334
Underwater Fairlead
Chike and killmanifeld valves
Slings
Travelling Block
TS-334, TS-116
TS-66V
TS-480
TS-65 or TS-116
TS Moly products are available for lubrication of various components in Offshore Jack-ups, Drill Ships, FPSOs, Lay & Derrick Barges &
Dredges – including Blower Assembly, Exciter Generator Bearings, AC Generator, Spud Racks and Pinions, Spud Guides and Ways, Final
Drive In-board Bearings, Final Drive Out-board Bearings, Final Drive Gear Teeth, Intermediate Out-board Bearings, Spud Motor Bearings,
Intermediate Gear Unit, Skidder Ways, Spud Primary Gear Box, Air Compressors (Piston Type), Anchor Lines & Cables, etc
Exclusively marketed in India under an arrangement with TS Moly
Lubricants Inc., USA. Ready Stocks available at Kakinada and
Visakhapatnam. Also sold through all major offshore resellers in India.
Project Sales Corp
Call +91-98851-49412
offshore@projectsalescorp.com
www.tsmoly.com