1. When designing a structure every owner, architect, engineer, and contractor should as the following
question: should it be reinforced concrete or steel frame?...with steel in earthquake zones, it is typical to
have large beams and columns to withstand building motions, or drift requirements, of earthquake.
Many times, these requirements in seismic zones are more demanding than strength requirements of
buildings.
Since that advancement of reinforced concrete system has advanced in recent decades, it can be said
that, now, both steel and concrete can be used for structures in seismic zones; and, both steel and
concrete have quality control problem-reinforced concrete or steel frame is truly the same?
Better Concrete
In Los Angeles, CA, a 23-story condominium tower having few visible beams and supports was
developed. Its seismic capacity is 33% stronger than any other buildings around it. The explanation for
such design was made possible by engineering research and high-reactivity metakaolin admixture,
enhancing concrete strength above 12,000psi. So, materials in building of the structure should not be
overlooked when deciding on reinforced concrete or steel frame.
"When you reduce the size of the square columns, you gain billable square footage," said Edward Kirk,
pre-construction project directory for San Mateo-based general contractor, Webcor Builders; this
means, reinforced concrete or steel frame requires efficient use of material to built smart in seismic
zones. It is better to invest in little more research and engineering to get more profits and better
structures in high seismic zones, whether you choose reinforced concrete or steel frame.
Brick in Seismic Zones
Many can say that brick is not the type of material that you would want to use for your building in high
seismic zones, but some owners have to have it. Despite the difficulty, Swiss architect by the name of
Mario Botta was determined to have brick on San Francisco Museum of Modern Art. To solve the
problem of brick being brittle and not a stable building unit, brick-faced precast panels backed by a
moment-resistance frame were built. This method of brick building allows placement of complex
geometric brick patterns, shapes, and sizes all into the precast assembly. After the manufacture of such
"seismic panels", push-pull connections are used to connect the panels to the building frame...
Should it be reinforced concrete or steel frame? Paul Peshkov is a distributor, business developer, and a
general contractor. As a favorite hobby, Mr. Peshkov is extensively involved in studying Alternative
Medicine. He enjoys helping people reach their full potential in life. For more info on his latest
developments visit more info visit :- http://www.steelbuildingsupply.co.uk