Hearing aids are electronic devices that are the greatly beneficial to the millions of people. Like any piece of the technology, they can stop to functioning at any time. The Consider that hearing aids are usually to worn for the long hours each day, which places stress on electrical components and the battery power.

1. Hearing aids are electronic devices
that are the greatly beneficial to the
millions of people. Like any piece of
the technology, they can stop to
functioning at any time. The Consider
that hearing aids are usually to worn
for the long hours each day, which
places stress on electrical
components and the battery power.

2. • Sounds are picked up by the hearing aid MICROPHONE.
• The sound is made louder by the AMPLIFIER.
• The sound passes through the TUBING and the
EARMOLD and enters the ear canal.
• The sound waves cause the eardrum to vibrate, setting
the tiny middle ear bones into vibration.
• These vibrations are transferred into the cochlea in the
inner ear where the information is sent to the brain and
hearing aid care importent factor

3.  Hearing aids are electronic devices that are the greatly beneficial
to the millions of people. Like any piece of the technology, they
can stop to functioning at any time. The Consider that hearing aids
are usually to worn for the long hours each day, which places
stress on electrical components and the battery power.
 Hearing aids regularly with a soft, dry cloth to Check for dirt and
grime. The Ear molds can be removed from the hearing aids and
cleaned with a mild soap solution.Turn off your hearing aid before
you go to the bed. This will avoid the unnecessary battery drain
when you’re not wearing your the hearing aids .Beltane Legend
hearing aid

4. • Batteries
• Maintenance
–Cleaning
–Visual Inspection
–Listening Checks

5. • Battery
• MTO Switch
• Volume Control
• Microphone(s)
• Earhook
• Tubing
• Earmold
Tip: To distinguish the right hearing aid from the left, have
your audiologist attach red and blue stickers to the hearing
aid and hearing loss or use a permanent marker to place
a small red or blue dot on each aid.