Report
Share
Download to read offline
Recommended
The design of Farm cart 0011 report 1 2020
This report describes the best designing of a 200cc FARM CART MACHINE which will be useful to the farm fields due to the fact that, the purchase, repair and maintenance are affordable to all level of income earners. Despite the cost effectiveness of the machine, the report also tries to justify that the machine can be used multipurposely as it serves the purposes of been used as farm transport, mowering machine, boom spraying and or mini planter with two rows. All these can be achieved as long as the implements are attached with respect to the power capacity of the farm cart.
The report tells only the design and testing of machine excluding its farm implements design. Some best reviews from other study projects done by other people in the world provided a good reference for designing and implementation of this project. The project is initially costly because it needs to develop a prototype and test the different first ideas.
The project report describes the important of choosing to use the designed farm cart machine compared to other farm machines at the market which are most efficiently to be used by farmers in their fields.
The challenges are inevitable in any project, here in designing of this 200cc farm machine, the major issue is the funding because the fund for this project is from the pocket which is always insufficient as it depends to the meals and accommodation money distribution sponsored from the HIGH EDUCATION STUDENTS LOAN BOARD (HESLB) thus it takes longer to accomplish the project by waiting another quarter of the semester to continue with the project which affects the other part of normal life(in terms of meals and accommodation).
The report recommends that, the department of engineering sciences and technology and Sokoine University of Agriculture as a whole should invest into this technology by utilizing fully the idea and funding the project for more better improvement so as to attain the desired standard that can with stand the different farm field factors. These when taken into consideration there is a possibility to achieve the industrialization policy in our country and thereafter it is a better approach to modern agriculture.
IRRIGATION SYSTEMS AND DESIGN - IWRE 317 questions collection 1997 - 2018 ...
This document contains sample exam questions for a course on irrigation systems design. It includes multiple choice and short answer questions testing understanding of key irrigation concepts. Some example questions are on pump characteristics, calculating water requirements for drip and sprinkler systems, estimating consumptive water use, and determining system efficiencies. The document provides a compilation of past exam questions from 1997 to 2018 to help students prepare for tests.
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] a...
With reference to a construction site visited recently, describe in details key features
that can be observed on site as follows
Foundations backfilling, hardcore, soil treatment, DPM and BRC works prior
to pouring oversite concrete
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] and BRC for engineers (civil)
BASICS OF COMPUTER PROGRAMMING-TAKE HOME ASSIGNMENT 2018
Self- Check 1
Which of the following are Pascal reserved words, standard identifiers, valid identifiers, invalid identifiers?
end ReadLn Bill
program Sues‟s Rate
Start begin const
Y=Z Prog#2 &Up
First Name „MaxScores‟ A*B
CostaMesa,CA Barnes&Noble CONST
XYZ123 ThisIsALongOne 123XYZANSWER
ANSWERS
Paschal reserved words:
begin, end, program, Start, CONST, const
Standard identifiers:
ReadLn, „MaxScores‟, Bill, Rate
Valid identifiers:
XYZ123, ThisIsALongOne, A*B, Y=Z, CostaMesa, CA, First Name
Invalid identifiers:
123XYZ, Sues‟s, &UpFirstName, Barnes&Noble, Prog#2
Self- Check 2
Which of the following literal values are legal and what are their types? Which are illegal and why?
15 „XYZ‟ „*‟
$25.123 15; -999
.123 „x‟ “X”
„9‟ „-5‟ True
ANSWER:
The following values are legal and their type
Legal
Type
Illegal
15
Integer literal
$25.123
„XYZ‟
String Literal
.123
„X‟
Character Literal
„9‟
True
Boolean Literal
15;
-999
Integer Literal
-„5‟
Operator literal
„*‟
TP- Lecture 4.2
Self- Checked 1
Which of the following are valid program headings? Which are invalid and why?
(i) Program program; - INVALID using reserved ID
(ii) program 2ndCourseInCS; -INVALID because starts with digit
(iii) program PascalIsFun;- VALID program heading
(iv) program Rainy Day; -INVALID – contains space
Self- Checked 2
Rewrite the following code so that it has no syntax errors and follows the writing conventions we adopted
(i) Program SMALL;
VAR X, Y, Z : real;
BEGIN
Y := 15.0;
Z := -Y + 3.5;
X :=Y + z;
writeln (x, Y, z);
END.
ANSWER:
Program
ENGINEERING SYSTEM DYNAMICS-TAKE HOME ASSIGNMENT 2018
1. Read Chapter 4 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 4.1 to 4.12 in Matlab.
2. Read Chapter 7 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 7.1 to 7.11 in Matlab.
3. Read Chapter 9 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 9.1 to 9.6 in Matlab.
4. Read Chapter 11 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 11.1 to 11.7 in Matlab.
5. Read Chapter 2 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 2.18 (page 63).
6. Read Chapter 3 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 3.13 (pp 98 - 100).
7. Read Chapter 4 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 4.20 (page 146).
8. Read Chapter 5 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problems 5.15 (page 198), 5.21 (pp 199 - 200) and 5.27 (pp 201 – 202).
Hardeninig of steel (Jominy test)-CoET- udsm
The document describes a Jominy end-quench test experiment to measure the hardenability of two steel samples. Steel samples A and C were heated to the austenite temperature and quenched with water at one end. Hardness measurements using the Rockwell C scale were taken at intervals along the samples. Sample A showed little variation in hardness, while hardness decreased with distance from the quenched end for sample C. A graph of hardness versus distance revealed that sample A has higher hardenability, retaining hardness further from the quenched end. The hardenability indices at 50HRC were determined to be 2mm, 5mm, and 6.5mm from the graph.
Ultrasonic testing report-JUNE 2018
1.1 The aim of the experiment
The aim of the experiment is to test the usefulness of the ultrasonic waves, by passing them through different
solids one can find out a lot of physical properties like young’s modulus , defects, Poisson ratio, Velocity of
sound in respective material this is due to the response of the received ultrasonic waves.
1.2 Theory of experiment
Ultrasonic testing (UT) is a family of non-destructive testing (NDT) techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion.
Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
Recommended
The design of Farm cart 0011 report 1 2020
This report describes the best designing of a 200cc FARM CART MACHINE which will be useful to the farm fields due to the fact that, the purchase, repair and maintenance are affordable to all level of income earners. Despite the cost effectiveness of the machine, the report also tries to justify that the machine can be used multipurposely as it serves the purposes of been used as farm transport, mowering machine, boom spraying and or mini planter with two rows. All these can be achieved as long as the implements are attached with respect to the power capacity of the farm cart.
The report tells only the design and testing of machine excluding its farm implements design. Some best reviews from other study projects done by other people in the world provided a good reference for designing and implementation of this project. The project is initially costly because it needs to develop a prototype and test the different first ideas.
The project report describes the important of choosing to use the designed farm cart machine compared to other farm machines at the market which are most efficiently to be used by farmers in their fields.
The challenges are inevitable in any project, here in designing of this 200cc farm machine, the major issue is the funding because the fund for this project is from the pocket which is always insufficient as it depends to the meals and accommodation money distribution sponsored from the HIGH EDUCATION STUDENTS LOAN BOARD (HESLB) thus it takes longer to accomplish the project by waiting another quarter of the semester to continue with the project which affects the other part of normal life(in terms of meals and accommodation).
The report recommends that, the department of engineering sciences and technology and Sokoine University of Agriculture as a whole should invest into this technology by utilizing fully the idea and funding the project for more better improvement so as to attain the desired standard that can with stand the different farm field factors. These when taken into consideration there is a possibility to achieve the industrialization policy in our country and thereafter it is a better approach to modern agriculture.
IRRIGATION SYSTEMS AND DESIGN - IWRE 317 questions collection 1997 - 2018 ...
This document contains sample exam questions for a course on irrigation systems design. It includes multiple choice and short answer questions testing understanding of key irrigation concepts. Some example questions are on pump characteristics, calculating water requirements for drip and sprinkler systems, estimating consumptive water use, and determining system efficiencies. The document provides a compilation of past exam questions from 1997 to 2018 to help students prepare for tests.
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] a...
With reference to a construction site visited recently, describe in details key features
that can be observed on site as follows
Foundations backfilling, hardcore, soil treatment, DPM and BRC works prior
to pouring oversite concrete
CONSTRUCTION [soil treatment, foundation backfill, Damp Proof Membrane[DPM] and BRC for engineers (civil)
BASICS OF COMPUTER PROGRAMMING-TAKE HOME ASSIGNMENT 2018
Self- Check 1
Which of the following are Pascal reserved words, standard identifiers, valid identifiers, invalid identifiers?
end ReadLn Bill
program Sues‟s Rate
Start begin const
Y=Z Prog#2 &Up
First Name „MaxScores‟ A*B
CostaMesa,CA Barnes&Noble CONST
XYZ123 ThisIsALongOne 123XYZANSWER
ANSWERS
Paschal reserved words:
begin, end, program, Start, CONST, const
Standard identifiers:
ReadLn, „MaxScores‟, Bill, Rate
Valid identifiers:
XYZ123, ThisIsALongOne, A*B, Y=Z, CostaMesa, CA, First Name
Invalid identifiers:
123XYZ, Sues‟s, &UpFirstName, Barnes&Noble, Prog#2
Self- Check 2
Which of the following literal values are legal and what are their types? Which are illegal and why?
15 „XYZ‟ „*‟
$25.123 15; -999
.123 „x‟ “X”
„9‟ „-5‟ True
ANSWER:
The following values are legal and their type
Legal
Type
Illegal
15
Integer literal
$25.123
„XYZ‟
String Literal
.123
„X‟
Character Literal
„9‟
True
Boolean Literal
15;
-999
Integer Literal
-„5‟
Operator literal
„*‟
TP- Lecture 4.2
Self- Checked 1
Which of the following are valid program headings? Which are invalid and why?
(i) Program program; - INVALID using reserved ID
(ii) program 2ndCourseInCS; -INVALID because starts with digit
(iii) program PascalIsFun;- VALID program heading
(iv) program Rainy Day; -INVALID – contains space
Self- Checked 2
Rewrite the following code so that it has no syntax errors and follows the writing conventions we adopted
(i) Program SMALL;
VAR X, Y, Z : real;
BEGIN
Y := 15.0;
Z := -Y + 3.5;
X :=Y + z;
writeln (x, Y, z);
END.
ANSWER:
Program
ENGINEERING SYSTEM DYNAMICS-TAKE HOME ASSIGNMENT 2018
1. Read Chapter 4 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 4.1 to 4.12 in Matlab.
2. Read Chapter 7 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 7.1 to 7.11 in Matlab.
3. Read Chapter 9 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 9.1 to 9.6 in Matlab.
4. Read Chapter 11 – System Dynamics for Mechanical Engineers by Matthew Davies and Tony L. Schmitz and implement Examples 11.1 to 11.7 in Matlab.
5. Read Chapter 2 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 2.18 (page 63).
6. Read Chapter 3 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 3.13 (pp 98 - 100).
7. Read Chapter 4 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problem 4.20 (page 146).
8. Read Chapter 5 - System Dynamics for Engineering Students: Concepts and Applications by Nicolae Lobontiu and attempt problems 5.15 (page 198), 5.21 (pp 199 - 200) and 5.27 (pp 201 – 202).
Hardeninig of steel (Jominy test)-CoET- udsm
The document describes a Jominy end-quench test experiment to measure the hardenability of two steel samples. Steel samples A and C were heated to the austenite temperature and quenched with water at one end. Hardness measurements using the Rockwell C scale were taken at intervals along the samples. Sample A showed little variation in hardness, while hardness decreased with distance from the quenched end for sample C. A graph of hardness versus distance revealed that sample A has higher hardenability, retaining hardness further from the quenched end. The hardenability indices at 50HRC were determined to be 2mm, 5mm, and 6.5mm from the graph.
Ultrasonic testing report-JUNE 2018
1.1 The aim of the experiment
The aim of the experiment is to test the usefulness of the ultrasonic waves, by passing them through different
solids one can find out a lot of physical properties like young’s modulus , defects, Poisson ratio, Velocity of
sound in respective material this is due to the response of the received ultrasonic waves.
1.2 Theory of experiment
Ultrasonic testing (UT) is a family of non-destructive testing (NDT) techniques based on the propagation of ultrasonic waves in the object or material tested. In most common UT applications, very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz, and occasionally up to 50 MHz, are transmitted into materials to detect internal flaws or to characterize materials. A common example is ultrasonic thickness measurement, which tests the thickness of the test object, for example, to monitor pipework corrosion.
Ultrasonic testing is often performed on steel and other metals and alloys, though it can also be used on concrete, wood and composites, albeit with less resolution. It is used in many industries including steel and aluminium construction, metallurgy, manufacturing, aerospace, automotive and other transportation sectors.
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Whether the Pascal program is small or large, it must have a specific structure. This
program consists mainly of one statement (WRITELN) which does the actual work
here, as it displays whatever comes between the parentheses. The statement is
included inside a frame starting with the keyword BEGIN and ending with the keyword
END. This is called the program main body (or the program block) and usually
contains the main logic of data processing.
Fluid mechanics ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluid mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluids mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fresh concrete -building materials for engineers
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
surveying- lecture notes for engineers
Course Contents:
Introduction; Linear measurements; Analysis and adjustment of measurements, Survey methods: coordinate systems, bearings, horizontal control, traversing, triangulation, detail surveying; Orientation and position; Areas and volumes; Setting out; Curve ranging; Global Positioning system (GPS); Photogrammetry.
Fresh concrete -building materials for engineers
General introduction
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
The diesel engine (also known as a compression-ignition or CI engine), named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel which is injected into the combustion chamber is caused by the elevated temperature of the air in the cylinder due to mechanical compression (adiabatic compression). Diesel engines work by compressing only the air. This increases the air temperature inside the cylinder to such a high degree that atomised diesel fuel that is injected into the combustion chamber ignites spontaneously. This contrasts with spark-ignition engines such as a petrol engine (gasoline engine) or gas engine (using a gaseous fuel as opposed to petrol), which use a spark plug to ignite an air-fuel mixture. In diesel engines, glow plugs (combustion chamber pre-warmers) may be used to aid starting in cold weather, or when the engine uses a lower compression-ratio, or both. The original diesel engine operates on the "constant pressure" cycle of gradual combustion and produces no audible knock.
A diesel engine built by MAN AG in 1906
Detroit Diesel timing
Fairbanks Morse model 32
The diesel engine has the highest thermal efficiency (engine efficiency) of any practical internal or external combustion engine due to its very high expansion ratio and inherent lean burn which enables heat dissipation by the excess air. A small efficiency loss is also avoided compared to two-stroke non-direct-injection gasoline engines since unburned fuel is not present at valve overlap and therefore no fuel goes directly from the intake/injection to the exhaust. Low-speed diesel engines (as used in ships and other applications where overall engine weight is relatively unimportant) can have a thermal efficiency that exceeds 50%.[1][2
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
Farm is an area of land and its building, used for growing crops a rearing of animals or an area of land
that is devoted primarily of agricultural process with the primary objective of producing food and other
commercial crops. Or an area of water that is devoted primarily to agricultural process in order to
produce and manage such commodities as fibers, grains, livestock or fuel.
The process of working the ground, planting seeds and growing of planting known as farming.it can
described s raising of animals for milk and meat as farming.
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
What is an Engine?
Before knowing about how the Petrol Engine works, let's first understand what an engine is. This is common for both petrol and diesel engines alike. An engine is a power generating machine which converts potential energy of the fuel into heat energy and then into motion. It produces power and also runs on its own power.
The engine generates its power by burning the fuel in a self-regulated and controlled „Combustion‟ process. The combustion process involves many sub-processes which burn the fuel efficiently and results in the smooth running of the engine.
These processes include:
The suction of air (also known as breathing or aspiration).
Mixing of the fuel with air after breaking the liquid fuel into highly atomized / mist form.
Igniting the air-fuel mixture with a spark (petrol engine).
Burning of highly atomized fuel particles which results in releasing / ejection of heat energy.
How does an Engine work?
The engine converts Heat Energy into Kinetic Energy in the form of „Reciprocating Motion‟. The expansion of heated gases and their forces act on the engine pistons. The gases push the pistons downwards which results in reciprocating motion of pistons.
This motion of the piston enables the crank-shaft to rotate. Thus, it finally converts the reciprocating motion into the 'Rotary motion' and passes on to wheels.
A petrol engine (known as a gasoline engine in American English) is an internal combustion engine with spark-ignition, designed to run on petrol (gasoline) and similar volatile fuels.
In most petrol engines, the fuel and air are usually mixed after compression (although some modern petrol engines now use cylinder-direct petrol injection). The pre-mixing was formerly done in a carburetor, but now it is done by electronically controlled fuel injection, except in small engines where the cost/complication of electronics does not justify the added engine efficiency. The process differs from a diesel engine in the method of mixing the fuel and air, and in using spark plugs to initiate the combustion process. In a diesel engine, only air is compressed
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
A tractor is an engineering vehicle specifically designed to deliver a high tractive effort (or torque) at slow speeds, for the purposes of hauling a trailer or machinery used in agriculture or construction. Most commonly, the term is used to describe a farm vehicle that provides the power and traction to mechanize agricultural tasks, especially (and originally) tillage, but nowadays a great variety of tasks. Agricultural implements 0may be towed behind or mounted on the tractor, and the tractor may also provide a source of power if the implement is mechanised.
The word Tractor is derived prior to 1900, the Machine were known as traction motor (pulling-machine).After the year 1900 both the words are joined by taking ‘Tract’ from Traction and ‘Tor” from motor calling it a Tractor.
In our Country tractors were started manufacturing in real sense after independence and at present we are self-sufficient in meeting demand of country’s requirement for tractors. Our country is basically an agricultural country where 75% of our population is directly or indirectly connected with agriculture. This cannot be produced with our conventional bullock pulled agricultural implements. Tractor is one of the basic agricultural machines
used for speeding up agriculture production.
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
Wind is the flow of gases on large scale. On the surface of the earth, wind consists of the bulk movement of air. In outer space, solar wind is the movement of gases and charged particles from the sun though space, while planetary wind is the outgassing of light chemical from a planet’s atmosphere into space. Wind by their spatial scale, their speed, the type of force that cause them, the region in which they occur and their effect. The strongest observed winds on planet in solar system occur on Neptune and Saturn. Winds have various aspects, an important one being its velocity, density of the gas involved and energy content of the wind.
Wind is almost entirely caused by the effects of the sun which, each hour, delivers 175 million watts of energy to the earth. This energy heats the planet’s surface, most intensively at the equator, which causes air to rise. This rising air creates an area of low pressure at the surface into which cooler air is sucked, and it is this flow of air that we know as “wind”. In reality atmospheric circulation is much more complicated and, after rising at the equator air travels pole wards. As it travels the air cools and eventually descends to the earth’s surface at about 30° latitude (north and south), from where it returns once again to the equator (a closed loop known as a Hadley Cell). Similar cells exist between 30° and 60° latitude (the Ferrell Cells) and between 60° latitude and each of the poles (the Polar Cells). Within these cells, the flow of air is further impacted by the rotation of the earth or the "Coriolis Effect". This effect creates a sideways force which causes air to circulate anticlockwise around areas of low pressure in the northern hemisphere and clockwise in the southern hemisphere
In summary, the origin of winds may be traced basically to uneven heating of the earth’s surface due to sun. This may lead to circulation of widespread winds on a global basis, producing planetary winds or may have a limited influence in a smaller area to cause local winds.
Hydro electric power report-AE 215 2018
Water power or Hydropower is power derived from the energy of free falling water which may
be harnessed for useful purposes. Hydroelectricity is the term referring to electricity generated
by hydropower which implies the production of electrical power through the use of the
gravitational force of falling or flowing water. It is the most widely used form of renewable
energy, accounting for 16 percent of global electricity generation..The cost of hydroelectricity is
relatively low, making it a competitive source of renewable electricity. The average cost of
electricity from a hydro plant larger than 10 megawatts is 3 to 5 U.S. cents per kilowatthour.
Hydro is also a flexible source of electricity since plants can be ramped up and down very
quickly to adapt to changing energy demands. However, damming interrupts the flow of rivers
and can harm local ecosystems, and building large dams and reservoirs often involves displacing
people and wildlife. Once a hydroelectric complex is constructed, the project produces no direct
waste, and has a considerably lower output level of the greenhouse gas carbon dioxide (CO2)
than fossil fuel powered energy plants.
SOLAR ENERGY - FARM POWER REPORT AE 215
Solar energy is a renewable energy, therefore have the following advantages
1. Once solar panels are installed, they produce energy without generating waste or pollution. They operate with little maintenance or intervention.
2. Solar electric generation is economically competitive where grid connection or fuel transport is difficult, costly or impossible. For example: satellites, island communities, remote locations and ocean vessels.
3. Once the initial capital cost of building a solar power plant has been met, operating costs are low when compared to other existing power technologies.
Materials Technology for Engineers pre-test 1 notes
Materials are probably more deep-seated in our culture than most of us realize. Transportation, housing, clothing, communication, recreation, and food production virtually every segment of our everyday lives is influenced to one degree or another by materials. Historically, the development and advancement of societies have been intimately tied to the members’ ability to produce and manipulate materials to fill their needs. In fact, early civilizations have been designated by the level of their materials development (i.e., Stone Age, Bronze Age). The earliest humans had access to only a very limited number of materials, those that occur naturally: stone, wood, clay, skins, and so on. With time they
discovered techniques for producing materials that had properties superior to those of the natural ones; these new materials included pottery and various metals. Furthermore, it was discovered that the properties of a material could be altered by heat treatments and by the addition of other substances. At this point, materials utilization was totally a selection process, that is, deciding from a given, rather limited set of materials the one that was best suited for an application by virtue of its characteristics. It was not until relatively recent times that scientists came to understand the relationships between the structural elements of materials and their properties. This knowledge acquired in the past 60 years or so, has empowered them to fashion, to a large degree, the characteristics of materials. Thus, tens of
thousands of different materials have evolved with rather specialized characteristics that meet the needs of our modern and complex society; these include metals, plastics, glasses, and fibers. The development of many technologies that make our existence so comfortable
has been intimately associated with the accessibility of suitable materials. An advancement
in the understanding of a material type is often the forerunner to the stepwise progression of a technology. For example, automobiles would not have been possible without the availability of inexpensive steel or some other comparable substitute. In our contemporary era, sophisticated electronic devices rely on components that are made from what are called semiconducting materials.
NUMERICA METHODS 1 final touch summary for test 1
MY FINAL TOUCH SUMMARY FOR TEST 1
ON 6TH MAY 2018
TOPICS AND MATERIALS COVERED
1. Class lecture notes (Basic concepts, errors and roots of function).
2. Lecture’s examples.
3. Past Years Examples.
4. Past Years examination papers.
5. Tutorial Questions.
6. Reference Books + web.
NUMERICAL METHODS 1 TUTORIAL QUESTIONS
Using the solutions obtained in parts (a) and (b) above to explain why initial
errors should need to be avoided as much as possible.
There is greater variation of solutions obtained in parts (a) and (b) due to initial errors as from (x , y)=(2.415,0) to (1.1) respectively , therefore should be avoided as much as possible to reduce variation of solutions.
MACHINE DESIGN QUESTION BANK ...
The document contains 38 questions related to machine design. The questions cover topics such as standardization of sizes, tolerances, fits, design of joints, shafts, levers, frames and other machine elements. Design calculations are required to determine dimensions that satisfy given loading and stress criteria. Materials, their properties and appropriate factors of safety are provided. References for solutions and examples are given from standard machine design textbooks.
IMPACT TEST REPORT ...
In the material testing laboratory, a Charpy impact test was performed on three different types (hot,cold,and steel alloy)of steels testing each variety at four different temperatures (32°C(RT), 100°C,0°C and -22°C ). From results (shown below), we determined that the a transition is from ductile failures to brittle failures
TENSILE TEST REPORT
In the material testing laboratory, Tensile test was done on a mild steel specimen as figure 4 to identify the young’s modulus, ultimate tensile strength, yield strength and percentage elongation. The results were as table 1
skeleton System.pdf (skeleton system wow)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
More Related Content
More from musadoto
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Whether the Pascal program is small or large, it must have a specific structure. This
program consists mainly of one statement (WRITELN) which does the actual work
here, as it displays whatever comes between the parentheses. The statement is
included inside a frame starting with the keyword BEGIN and ending with the keyword
END. This is called the program main body (or the program block) and usually
contains the main logic of data processing.
Fluid mechanics ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluid mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fluids mechanics (a letter to a friend) part 1 ...
1. The background of Fluid Mechanics
2. Fields of Fluid mechanics
3. Introduction and Basic concepts
4. Properties of Fluids
5. Pressure and fluid statics
6. Hydrodynamics
Fresh concrete -building materials for engineers
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
surveying- lecture notes for engineers
Course Contents:
Introduction; Linear measurements; Analysis and adjustment of measurements, Survey methods: coordinate systems, bearings, horizontal control, traversing, triangulation, detail surveying; Orientation and position; Areas and volumes; Setting out; Curve ranging; Global Positioning system (GPS); Photogrammetry.
Fresh concrete -building materials for engineers
General introduction
CONCRETE
is a building Material made from a mixture of gravel ,sand ,cement,water and air ,forming a stone like mass on hardenning.
FRESH CONCRETE
It is a concrete that has not reached the final setting time.
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
The diesel engine (also known as a compression-ignition or CI engine), named after Rudolf Diesel, is an internal combustion engine in which ignition of the fuel which is injected into the combustion chamber is caused by the elevated temperature of the air in the cylinder due to mechanical compression (adiabatic compression). Diesel engines work by compressing only the air. This increases the air temperature inside the cylinder to such a high degree that atomised diesel fuel that is injected into the combustion chamber ignites spontaneously. This contrasts with spark-ignition engines such as a petrol engine (gasoline engine) or gas engine (using a gaseous fuel as opposed to petrol), which use a spark plug to ignite an air-fuel mixture. In diesel engines, glow plugs (combustion chamber pre-warmers) may be used to aid starting in cold weather, or when the engine uses a lower compression-ratio, or both. The original diesel engine operates on the "constant pressure" cycle of gradual combustion and produces no audible knock.
A diesel engine built by MAN AG in 1906
Detroit Diesel timing
Fairbanks Morse model 32
The diesel engine has the highest thermal efficiency (engine efficiency) of any practical internal or external combustion engine due to its very high expansion ratio and inherent lean burn which enables heat dissipation by the excess air. A small efficiency loss is also avoided compared to two-stroke non-direct-injection gasoline engines since unburned fuel is not present at valve overlap and therefore no fuel goes directly from the intake/injection to the exhaust. Low-speed diesel engines (as used in ships and other applications where overall engine weight is relatively unimportant) can have a thermal efficiency that exceeds 50%.[1][2
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
Farm is an area of land and its building, used for growing crops a rearing of animals or an area of land
that is devoted primarily of agricultural process with the primary objective of producing food and other
commercial crops. Or an area of water that is devoted primarily to agricultural process in order to
produce and manage such commodities as fibers, grains, livestock or fuel.
The process of working the ground, planting seeds and growing of planting known as farming.it can
described s raising of animals for milk and meat as farming.
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
What is an Engine?
Before knowing about how the Petrol Engine works, let's first understand what an engine is. This is common for both petrol and diesel engines alike. An engine is a power generating machine which converts potential energy of the fuel into heat energy and then into motion. It produces power and also runs on its own power.
The engine generates its power by burning the fuel in a self-regulated and controlled „Combustion‟ process. The combustion process involves many sub-processes which burn the fuel efficiently and results in the smooth running of the engine.
These processes include:
The suction of air (also known as breathing or aspiration).
Mixing of the fuel with air after breaking the liquid fuel into highly atomized / mist form.
Igniting the air-fuel mixture with a spark (petrol engine).
Burning of highly atomized fuel particles which results in releasing / ejection of heat energy.
How does an Engine work?
The engine converts Heat Energy into Kinetic Energy in the form of „Reciprocating Motion‟. The expansion of heated gases and their forces act on the engine pistons. The gases push the pistons downwards which results in reciprocating motion of pistons.
This motion of the piston enables the crank-shaft to rotate. Thus, it finally converts the reciprocating motion into the 'Rotary motion' and passes on to wheels.
A petrol engine (known as a gasoline engine in American English) is an internal combustion engine with spark-ignition, designed to run on petrol (gasoline) and similar volatile fuels.
In most petrol engines, the fuel and air are usually mixed after compression (although some modern petrol engines now use cylinder-direct petrol injection). The pre-mixing was formerly done in a carburetor, but now it is done by electronically controlled fuel injection, except in small engines where the cost/complication of electronics does not justify the added engine efficiency. The process differs from a diesel engine in the method of mixing the fuel and air, and in using spark plugs to initiate the combustion process. In a diesel engine, only air is compressed
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
A tractor is an engineering vehicle specifically designed to deliver a high tractive effort (or torque) at slow speeds, for the purposes of hauling a trailer or machinery used in agriculture or construction. Most commonly, the term is used to describe a farm vehicle that provides the power and traction to mechanize agricultural tasks, especially (and originally) tillage, but nowadays a great variety of tasks. Agricultural implements 0may be towed behind or mounted on the tractor, and the tractor may also provide a source of power if the implement is mechanised.
The word Tractor is derived prior to 1900, the Machine were known as traction motor (pulling-machine).After the year 1900 both the words are joined by taking ‘Tract’ from Traction and ‘Tor” from motor calling it a Tractor.
In our Country tractors were started manufacturing in real sense after independence and at present we are self-sufficient in meeting demand of country’s requirement for tractors. Our country is basically an agricultural country where 75% of our population is directly or indirectly connected with agriculture. This cannot be produced with our conventional bullock pulled agricultural implements. Tractor is one of the basic agricultural machines
used for speeding up agriculture production.
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
Wind is the flow of gases on large scale. On the surface of the earth, wind consists of the bulk movement of air. In outer space, solar wind is the movement of gases and charged particles from the sun though space, while planetary wind is the outgassing of light chemical from a planet’s atmosphere into space. Wind by their spatial scale, their speed, the type of force that cause them, the region in which they occur and their effect. The strongest observed winds on planet in solar system occur on Neptune and Saturn. Winds have various aspects, an important one being its velocity, density of the gas involved and energy content of the wind.
Wind is almost entirely caused by the effects of the sun which, each hour, delivers 175 million watts of energy to the earth. This energy heats the planet’s surface, most intensively at the equator, which causes air to rise. This rising air creates an area of low pressure at the surface into which cooler air is sucked, and it is this flow of air that we know as “wind”. In reality atmospheric circulation is much more complicated and, after rising at the equator air travels pole wards. As it travels the air cools and eventually descends to the earth’s surface at about 30° latitude (north and south), from where it returns once again to the equator (a closed loop known as a Hadley Cell). Similar cells exist between 30° and 60° latitude (the Ferrell Cells) and between 60° latitude and each of the poles (the Polar Cells). Within these cells, the flow of air is further impacted by the rotation of the earth or the "Coriolis Effect". This effect creates a sideways force which causes air to circulate anticlockwise around areas of low pressure in the northern hemisphere and clockwise in the southern hemisphere
In summary, the origin of winds may be traced basically to uneven heating of the earth’s surface due to sun. This may lead to circulation of widespread winds on a global basis, producing planetary winds or may have a limited influence in a smaller area to cause local winds.
Hydro electric power report-AE 215 2018
Water power or Hydropower is power derived from the energy of free falling water which may
be harnessed for useful purposes. Hydroelectricity is the term referring to electricity generated
by hydropower which implies the production of electrical power through the use of the
gravitational force of falling or flowing water. It is the most widely used form of renewable
energy, accounting for 16 percent of global electricity generation..The cost of hydroelectricity is
relatively low, making it a competitive source of renewable electricity. The average cost of
electricity from a hydro plant larger than 10 megawatts is 3 to 5 U.S. cents per kilowatthour.
Hydro is also a flexible source of electricity since plants can be ramped up and down very
quickly to adapt to changing energy demands. However, damming interrupts the flow of rivers
and can harm local ecosystems, and building large dams and reservoirs often involves displacing
people and wildlife. Once a hydroelectric complex is constructed, the project produces no direct
waste, and has a considerably lower output level of the greenhouse gas carbon dioxide (CO2)
than fossil fuel powered energy plants.
SOLAR ENERGY - FARM POWER REPORT AE 215
Solar energy is a renewable energy, therefore have the following advantages
1. Once solar panels are installed, they produce energy without generating waste or pollution. They operate with little maintenance or intervention.
2. Solar electric generation is economically competitive where grid connection or fuel transport is difficult, costly or impossible. For example: satellites, island communities, remote locations and ocean vessels.
3. Once the initial capital cost of building a solar power plant has been met, operating costs are low when compared to other existing power technologies.
Materials Technology for Engineers pre-test 1 notes
Materials are probably more deep-seated in our culture than most of us realize. Transportation, housing, clothing, communication, recreation, and food production virtually every segment of our everyday lives is influenced to one degree or another by materials. Historically, the development and advancement of societies have been intimately tied to the members’ ability to produce and manipulate materials to fill their needs. In fact, early civilizations have been designated by the level of their materials development (i.e., Stone Age, Bronze Age). The earliest humans had access to only a very limited number of materials, those that occur naturally: stone, wood, clay, skins, and so on. With time they
discovered techniques for producing materials that had properties superior to those of the natural ones; these new materials included pottery and various metals. Furthermore, it was discovered that the properties of a material could be altered by heat treatments and by the addition of other substances. At this point, materials utilization was totally a selection process, that is, deciding from a given, rather limited set of materials the one that was best suited for an application by virtue of its characteristics. It was not until relatively recent times that scientists came to understand the relationships between the structural elements of materials and their properties. This knowledge acquired in the past 60 years or so, has empowered them to fashion, to a large degree, the characteristics of materials. Thus, tens of
thousands of different materials have evolved with rather specialized characteristics that meet the needs of our modern and complex society; these include metals, plastics, glasses, and fibers. The development of many technologies that make our existence so comfortable
has been intimately associated with the accessibility of suitable materials. An advancement
in the understanding of a material type is often the forerunner to the stepwise progression of a technology. For example, automobiles would not have been possible without the availability of inexpensive steel or some other comparable substitute. In our contemporary era, sophisticated electronic devices rely on components that are made from what are called semiconducting materials.
NUMERICA METHODS 1 final touch summary for test 1
MY FINAL TOUCH SUMMARY FOR TEST 1
ON 6TH MAY 2018
TOPICS AND MATERIALS COVERED
1. Class lecture notes (Basic concepts, errors and roots of function).
2. Lecture’s examples.
3. Past Years Examples.
4. Past Years examination papers.
5. Tutorial Questions.
6. Reference Books + web.
NUMERICAL METHODS 1 TUTORIAL QUESTIONS
Using the solutions obtained in parts (a) and (b) above to explain why initial
errors should need to be avoided as much as possible.
There is greater variation of solutions obtained in parts (a) and (b) due to initial errors as from (x , y)=(2.415,0) to (1.1) respectively , therefore should be avoided as much as possible to reduce variation of solutions.
MACHINE DESIGN QUESTION BANK ...
The document contains 38 questions related to machine design. The questions cover topics such as standardization of sizes, tolerances, fits, design of joints, shafts, levers, frames and other machine elements. Design calculations are required to determine dimensions that satisfy given loading and stress criteria. Materials, their properties and appropriate factors of safety are provided. References for solutions and examples are given from standard machine design textbooks.
IMPACT TEST REPORT ...
In the material testing laboratory, a Charpy impact test was performed on three different types (hot,cold,and steel alloy)of steels testing each variety at four different temperatures (32°C(RT), 100°C,0°C and -22°C ). From results (shown below), we determined that the a transition is from ductile failures to brittle failures
TENSILE TEST REPORT
In the material testing laboratory, Tensile test was done on a mild steel specimen as figure 4 to identify the young’s modulus, ultimate tensile strength, yield strength and percentage elongation. The results were as table 1
More from musadoto (20)
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Ae 219 - BASICS OF PASCHAL PROGRAMMING-2017 test manual solution
Fluids mechanics (a letter to a friend) part 1 ...
Fluids mechanics (a letter to a friend) part 1 ...
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
DIESEL ENGINE POWER REPORT -AE 215 -SOURCES OF FARM POWER
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
Farm and human power REPORT - AE 215-SOURCES OF FARM POWER
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
ENGINE POWER PETROL REPORT-AE 215-SOURCES OF FARM POWER
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
TRACTOR POWER REPORT -AE 215 SOURCES OF FARM POWER 2018
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
WIND ENERGY REPORT AE 215- 2018 SOURCES OF FARM POWER
Materials Technology for Engineers pre-test 1 notes
Materials Technology for Engineers pre-test 1 notes
Recently uploaded
skeleton System.pdf (skeleton system wow)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
Gender and Mental Health - Counselling and Family Therapy Applications and In...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف أحرف الخلاف للقراء العشرةأعد أحرف الخلاف بالتلوين وصلا سمير بسيوني غفر الله له
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
Bossa N’ Roll Records by Ismael Vazquez.
Bossa N Roll Records presentation by Izzy Vazquez for Music Retail and Distribution class at Full Sail University
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneLeveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
Practical manual for National Examination Council, Nigeria.
Contains guides on answering questions on the specimens provided
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Recently uploaded (20)
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Gender and Mental Health - Counselling and Family Therapy Applications and In...
Gender and Mental Health - Counselling and Family Therapy Applications and In...
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
مصحف القراءات العشر أعد أحرف الخلاف سمير بسيوني.pdf
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Juneteenth Freedom Day 2024 David Douglas School District
Juneteenth Freedom Day 2024 David Douglas School District
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx
BIOLOGY NATIONAL EXAMINATION COUNCIL (NECO) 2024 PRACTICAL MANUAL.pptx