Mind the shaft coupling issues!
Why spend money on high-accuracy encoders if you don’t care enough about the shaft coupling issues?
We at Lika know both very well, so we are able to always provide the most suitable solution.
Scroll through our comprehensive range of flexible, rigid, transmission, electrically insulated couplings or contact us to get a competent advice about your coupling needs.
1. PANTONE
BLACK 7 C
PANTONE
BRIGHT GREEN C
CMYK 90, 0, 60, 0 CMYK 64, 60, 65, 55
RGB 0, 176, 139 RAL 8019
RGB 61, 57, 53
Smart encoders & actuators
2017
M ay
Mind the shaft coupling issues!
Why spend money on high-accuracy encoders if you don’t care enough about the shaft coupling issues?
We at Lika know both very well, so we are able to always provide the most suitable solution.
Scroll through our comprehensive range of flexible, rigid, transmission, electrically insulated couplings or
contact us to get a competent advice about your coupling needs.
Lika offers a comprehensive range of couplings to meet a variety of solid shaft
installations: couplings specific for encoders and motors, flexible couplings, rigid
couplings, transmission couplings, electrically insulated couplings, couplings for
special environments, etc. What’s more, we can provide you with competent ad-
vice, so your system can work perfectly in every application.
MOR is the Oldham-type flexible coupling series perfect for
integration into stepping motors, general-purpose motors and
rotating shafts in general. The spacer’s and hub’s design (with set-
screw, clamping, key and clamping + key fixing options) allows to
reduce the overall foot-print while widening the bores selection as
well as increasing the rated torque at the same time. The spacer, in
hard polyacetal, affords a projection structure which enables larger
lateral and angular misalignment to be effortlessly accepted since
the projection acts as a support. Thus the bending moment does not
arise and the allowable angular misalignment is increased up to
3° (instead of 1° - 1.5° in comparable models).
MOR’s torque reaches 160 Nm. In addition MOR is able to excel-
lently absorb the vibrations since the amplitude under natural fre-
quency is low. MOR is available in the range from 6 to 68 mm
(0.236” to 2.677”) outer diameter and 1 to 38 mm (0.039” to
1.496”) bore diameter and is electrically insulated (up to 20 kV).
It can be ordered with different bore diameters at hubs.
The allowable operating temperature is between -20°C and +80°C
(-4°F +176°F).
The MOM Oldham-type flexible coupling is distinguished by its
spheroidal graphite cast iron (EN-GJS-400) metal spacer that
connects the hubs. It yields an increased impact and fatigue resi-
stance compared to resin spacers and allows to reach the highest
torque (up to 352 Nm) and torsional rigidity (up to 46,000 Nm/rad)
while providing optimal ductility properties at the same time. Fur-
thermore it excellently compensates for large lateral (up to 1.4 mm
/ 0.055”) and angular misalignments (up to 2° instead of 1° - 1.5°
in comparable models). So it is ideally suited for integration into
general-purpose motors and rotating shafts with low speed
and high torque characteristics in severe industrial applications.
The spacer is self-lubricating for virtually maintenance-free endu-
ring service. MOM flexible coupling is offered in a very wide se-
lection of bore diameters ranging between 3 mm and 42 mm
(0.118” to 1.653”), with setscrew, clamping, key and clamping + key
type hubs. In addition it can be ordered with different bore diame-
ters at hubs.
Scroll through our comprehensive range of couplings