Step-by-step MB SD Connect C4 WLAN Setting Guide

1. Step-by-step MB SD Connect C4 WLAN Setting
Guide
Many people know there are many diferents between C3 and sd C4, the biggest difference is
connection wiring mode, star C3 need 232 port, but MB SD C4 can be used with network
port, even wireless. Many people do not know how to set up WLAN, then let me
explain how to set up in detail.
1. Find out and open Local Area Connection Properties>>General>>Internet Protocol (TCP/IP)
Properties. Set IP address as 172.29.127.XXX (any digit combination between 1 to254) and subnet
mask as 255.255.0.0.
2. Double click MB SD connect C4 to open the control menu.

2. 3. Select "Configuration" icon and accept the warning message by click "Yes"
4. Select "Register/Configure" under the "MUX" icon

3. 5. Select the desired SD connect name
6. Set WLAN parameters, Road including: ID address, Network screen, SSID (network name),
Encryption, key/
ID address: 192.168.2.200
Network screen: 255.255.255.0

4. SSID (network name): Road24h
Encryption: WEP/Hex
Network key: aaaaaaaaaaaaaaaaaaaaaaaaaa (26 * a)
7. Click "Start" to continue network configuration

5. 8. WLAN configuration information will display on the next program.

6. 9. Open SD connect wireless connection Internet Protocol (TCP/IP) Properties. Set the IP address
as: 192.168.2.xxx (any digit combination between 1 to254 except 200) and set subnet mask as
255.255.255.0.
10. Reflash wireless network list and select "Road24h"

7. 11. Enter and confirm the network key: aaaaaaaa*a (26*a)

8. 12. The windows display the network connection is completed.
13. Come back to the SD C4 Control menu. Select "Select MUK" to check WLAN accessible

9. 14. Select "Configuration" in the main menu and click "Self-diagnosis"

10. 15. SD connect Toolkit window display SD C4 starts to process self-diagnosis
16. The self-diagnosis result will be shown on the window program.

11. http://www.mbstarshop.com