motorised screw jacks raising and lowering upper caterpillar platen for thickness adjustment and height adjustment in continous sandwich panel laminating machines

•

0 likes•137 views

Business

Similar to motorised screw jacks raising and lowering upper caterpillar platen for thickness adjustment and height adjustment in continous sandwich panel laminating machines

25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...

Jacton Electromechanical Co.,Ltd

25kn load capacity machine screw jacks 300mm stroke for continuous pu panel p...

Jacton Electromechanical Co.,Ltd

manual screw jack with hand wheel operation adjusting upper rolls in Coil Processing Sheet Slitter Line.Two worm gear screw jacks are connected by a line shafting, a 8" diameter hand wheel manual adjustment upper rolls in the vertical plane to permit synchronized roll penetration into the material to be achieved from the operator side of this machine, and all lower flattening rolls and pinch rolls are fixed. Two worm gear screw jacks model JT-3T-IS-300-H-II-C-PP/HW, maximum load capacity 3 ton, inverted translating screw type, 300mm(12") travel stroke, high gear ratio 1/6, clevis end, double input worm shaft, additional protective pipe for dust-proof and 8" diameter hand wheel.

manual screw jack with hand wheel operation adjusting upper rolls in Coil Pro...

Jacton Electromechanical Co.,Ltd

1 ton, 2 ton, 3 ton, 5 ton, 10 ton precision gear lifts worm gear drive, prec...

Jacton Electromechanical Co.,Ltd

Miniature worm gear acme mechanical jacks, micro miniature actuators, micro-m...

Jacton Electromechanical Co.,Ltd

Miniature linear screw adjustment, lightweight gear drive lifting, lightweight screw mechanism for lifting, micro worm gear screw actuators Features 1. Lifting Force 2.5kN. Under max. lifting force, drive torque 1.2Nm (high speed), 0.4Nm (low speed). 2. Lifting screw diameter 16 mm, pitch 4 mm. 3. High gear ratio 1/4, low gear ratio 1/16. 4. Translating screw, travelling nut rotating screw, keyed translating screw configurations in upright or inverted mounting orientations. 5. Precision positioning, self-locking lead screw which supports the loads and hold position with no need to employ brake mechanism or other locking systems. 6. Hand-operated screw jack by hand wheel or crank handle, or electric driven screw jack by 3-phase or single phase motor or gear reduction motor. 7. No standard lead screw travel length, all lead screw travel length is processed according customers requirements. Maximum permissible 300mm travel length. 8. Lead screw end fittings include top plate, clevis end, plain end and threaded end. 9. Individually or multiple screw jack lift system arrangements are available. Applications Micro-miniature screw jacks matching mini bevel gearboxes with parts are composed of small screw jacks lifting system, which widely used in beverage can conveyor systems height adjustment and beverage can washing area of the production line, saving man-hours and lowering the down time, crucial for increasing output and are extremely pleased with the recent financial benefits. Prior to the upgrade when the can washer area on each line required to be changed to accommodate a run taller or shorter cans the conversion would be completed manually. Small screw jack lifting systems is utilized several stages for washing and blow drying the cans. Suitable for lifting height adjustment and washing in aluminium can production lines, magnetic conveying systems, steel can line, aluminium can line, food can line, upgrade fill and packaging line, conversion steel aluminum can line, bottle conveyor systems, case and pallet conveyor systems.

Miniature linear screw adjustment, lightweight gear drive lifting, lightweigh...

Jacton Electromechanical Co.,Ltd

Mini worm gear screw jack, mini machine screw jack, micro worm drive lifting ...

Jacton Electromechanical Co.,Ltd

Mini screw jack lifting, micro worm gear screw lifter, micro screw jacks, min...

Jacton Electromechanical Co.,Ltd

Micro lift jack, small screw jacks, 2.5kn mini worm gear screw jack, mechanic...

Jacton Electromechanical Co.,Ltd

Small worm gear jack, acme miniature screw jack, miniature lifting jack screw...

Jacton Electromechanical Co.,Ltd

Light weight screw lift equipment, 16mm screw jack gearbox, micro motor screw...

Jacton Electromechanical Co.,Ltd

Micro lifting mechanism, light duty screw jack, light weight miniature jacks,...

Jacton Electromechanical Co.,Ltd

Miniature lifting screw jack, light duty screw jack rod, miniature screw jack...

Jacton Electromechanical Co.,Ltd

Smallest cubic screw jack, miniature wormgear screw jack, 2.5kn cubic screw j...

Jacton Electromechanical Co.,Ltd

Mini screw lift jack, miniture lifter mechanism, light duty gear jack, light ...

Jacton Electromechanical Co.,Ltd

Miniature screw jacks, miniature acme shafts jack, small worm gear jack screw...

Jacton Electromechanical Co.,Ltd

Jtc350 worm gear screw lifter,35 ton actuator arm jackscrew,35t linear gear j...

Jacton Electromechanical Co.,Ltd

Jtc200 worm gear screw lifter,20000kg rotating screw jack,20ton travelling nut screw jack,20 t 4 ft worm gear lift jack,200 kn worm screw lift assembly,20 tonnes cubical gearbox screw jack static load capacity 200 kn, high speed torque 146 n.m, low speed torque 48 n.m. lead screw (spindle) Tr70x10. high speed gear ratio 1/10, low speed gear ratio 1/40. upright or inverted translating screw, rotating screw and keyed screw configurations. precision positioning, self locking lead screw which support the loads and hold position without brake mechamism. hand wheel or hand crank manual operation, or single phase or three phases electric motor driven, gear motor driven or dc 24v gear reduction motor drives. thread end, clevis end, plain end, forked head and top plate (flange type) for lead screw (spindle) end types. customized various length stroke, under tension load, maximum 3000 mm stroke. single screw jack or multiple screw jacks system arrangements.

Jtc200 worm gear screw lifter,20000kg rotating screw jack,20ton travelling nu...

Jacton Electromechanical Co.,Ltd

sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes for raising and lowering sluice gates features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Sluice gate jack with limit switches, sluice gate jacks, screw jack gearboxes...

Jacton Electromechanical Co.,Ltd

dam gate hoist, head gate hoist, electric gate gear, sluice gate lifting gear, sluice gate jack, screw jack raising and lowering dampers features: Important Components: 1. Heavy duty and self lock screw jack. Special requirements stainless steel jack 2. AC gear motor, worm gear reducer, helical bevel gear reducer or other gear reduction mechanism. 3. Limit switches or prevent overtravel limiter for control full extension and retraction travel stroke, which installed on steel protective pipe cover. 4. Steel protective pipe cover for anti-rust and anti-dust under screw jack gearbox, when full retraction stroke. Other Features: 1. Inverted type installation, tension load. 2. Translating screw with female thread cylinder rod clevis end. 3. Low speed gear ratio screw jack with gear reduction mechanism geared motor. 4. Lifting screw total length = required stroke + foundation beam thickness + jack housing height + screw top end length. 5. Lifting speed about 150 mm/min to 300 mm/min, it depends on customers requirements. 6. Selection screw jack, should consider gate sizes, self weight, water pressure force, water impulsive force. 7. We made water conservancy project with screw jack stroke 900 mm, 1000 mm, 1500 mm, 2000 mm, 2500 mm, 3000 mm, 3500 mm, 4000 mm, 4500 mm, 5000 mm, 5500 mm, 6000 mm. Please note, longer travel stroke slower travel speed. Customers Used Screw Jacks Models: 1. JTW-35T-IS-4000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr100x18, 35 ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 4000mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 2. JTW-25T-IS-3500-L-II-M4- PP/GR/LS. Lifting screw sizes Tr90x16, 25ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3500mm, low gear ratio 1/32, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches. 3. JTW-20T-IS-3000-L-II-M4-PP/GR/LS. Lifting screw sizes Tr65x12, 20ton maximum tension lifting force, inverted mounting screw jack, translating screw configuration, long travel length 3000mm, low gear ratio 1/24, clevis end fitting, motor flange adapter, protective pipe, 3-phase 10:1 ratio flange mounted geared induction motor and limit switches.

Dam gate hoist, head gate hoist, electric gate gear, sluice gate lifting gear...

Jacton Electromechanical Co.,Ltd

Similar to motorised screw jacks raising and lowering upper caterpillar platen for thickness adjustment and height adjustment in continous sandwich panel laminating machines (20)