1. NanoDiamond/NanoGraphite-based motor oil additives called ADDO can reduce fuel consumption by up to 12% and friction and wear while reinforcing motor surfaces. 2. ADDO cures nano-defects on surfaces, increases hardness and wear resistance, improves the motor by keeping a thin oil layer at high loads, and uses nanoGraphite as an eco-friendly dry lubricant. 3. Testing showed ADDO increased power and torque after only 10 hours of running compared to 60 hours for regular oil, and significantly reduced wear on valves, cylinders, and valve levers after running-in.

1.
ADDO ®
Nanographite
NanoDiamond / NanoGraphite – based
motor oil additive
PlasmaChem GmbH + =
Rudower Chaussee 29
12489 Berlin
Germany
www.plasmachem.com
Nanodiamond
NanoDiamond / NanoGraphite – based motor oil additives, are the result of the latest
developments in Nanotechnology. They reduce the fuel consumption (up to 12%), friction
and wear; reinforce the inner motor surfaces and recondition the motor.
ADDO
- Cures micro- and nano-defects on a surface and leads to the atomic roughness;
- Impregnates metallic surfaces, increases their hardness and wear resistance;
- Improves the motor: decreases dry friction by keeping a thin oil layer on the motor
surfaces also at higher loads;
- Nanographite particles work as eco-friendly dry lubricant and reduces friction and wear.
ADDO is a unique additive with the following advantages:
1. Efficiency of ADDO remains for many tens of thousands kilometers, also after an oil
change;
2. ADDO reinforces surfaces of the motor;
3. Eco-, catalyzer- and engine friendly – ADDO contains only carbon, and does not
contain metals, sulfides and other harmful substances;
4. NanoDiamonds adsorb ionic and molecular products of abrasion, so that the rubbing
surface remains clean.
Increase of Power and torque
+ Decrease of fuel consumption
= Higher Engine Efficiency
Comparison of ADDO with other additives
Long-time Short-time Efficiency after Effect on the Regeneration of Engine- and eco-
efficiency efficiency oil change new engines engine surfaces friendly
ADDO +++ ++ ++ +++ +++ +++
PTFE (Teflon)-
based
–– + o o o –
Silicones-based – ++ o o o o
Heavy metals-
based
+ +++ o o o –

2. ADDO ® PlasmaChem GmbH
Rudower Chaussee 29
12489 Berlin
Germany
NanoDiamond / NanoGraphite – based www.plasmachem.com
motor oil additive
Reduction of running-in time of the engine
Target value of Oil, Oil with ADDO,
manufacturer after 60 hours after 10 hours
Power, HP 100 % 100 % 102 %
Torque, Nm 100 % 100 % 102 %
Wear characteristics after running-in, %
Target value of
Oil Oil with ADDO
manufacturer
Valve, µm 100 % 100 % 46 %
Cylinder, µm 100 % 100 % 58 %
Valve lever, µm 100 % 100 % 54 %
Advantages for the new engine
After first 180 hours run-time
Oil Oil with ADDO
Fuel consumption – 2,7 % – 6,0 %
Compression + 7,6 % + 12,0 %
Power losses, HP – 5,7 % – 7,6 %
Advantages for the engine
Tribomechanical properties
Oil Oil with ADDO
Friction coefficient 100 % 87,5 %
Wear 100 % 81 %
The test results were also published in specialized literature
ADDO confirms DIN EN ISO 6245, DIN EN ISO 2160 and other standards