The document describes HiSUN's thin film photovoltaic modules. HiSUN aims to be the leading provider of thin film solar products using amorphous silicon and microcrystalline silicon. Their thin film modules offer high performance using less silicon than crystalline solar cells. As thin film modules have a low temperature coefficient, they generate more energy than crystalline modules in warm climates. The document provides specifications and dimensions for HiSUN's 105W, 100W, and 90W thin film modules.

1. GREEN HOUSE
HiSUN: Aiming to be the eminent in solar power
offering the most efficient thin film photovoltaic products
ever manufactured, and becomes the provider of
105/100/90 WATT choice for multi-megawatt-scale power production.
Thin film mODUlE
Amorphous Silicon / Multi-layers
HS-105 | HS-100 | HS-90
green house hi economy plants
THIN FILM PHOTOVOLTAICS:
THE NEXT EVOLUTION
OF SOLAR TECHNOLOGY
Leading green plants with green energy
Hisun’s thin film product pairs amorphous silicon
Since 2010, Hisun has led the energy industry
with a layer of microcrystalline silicon to achieve with efficient, affordable systems and powers
high stability and performance. produced with more homes and businesses than any other solar
less than one percent of the silicon used in manufacturer in China. From research and
development, to system design, delivery, deployment
crystalline solar cells, thin film products offer high
and a more diverse product portfolio, Hisun is ready
performance with less semiconductor material. to partner with you to create customized solar
with a low temperature coefficient for output solutions, with an unyielding commitment to quality
control and customer service.
power, thin film generates greater energy than
its crystalline silicon counterpart in geographic G R E E N H O U S E
regions where temperatures are high. in warm
climates, this translates into more kilowatt-hours
per kilowatt.

2. 105/100/90 WATT
HS-105 | HS-100 | HS-90
ELECTRICAL DATA NAmEpLATE VALUEs
Maximum power Pmax 105 100 90
Open-circuit voltage Voc 138 136 134
Short-circuit current Isc 1.30 1.28 1.25
Voltage at maximum power Vpmax 104 V 102 V 100 V
Current at maximum power Ipmax 1.011 A 0.980 A 0.900 A
Temperaturecoefficient – open circuit voltage β -0.34%/℃
Temperaturecoefficient – short circuit current α +0.09%/℃
Temperaturecoefficient – power γ -0.21%/℃
MADE IN CHINA,
The electrical data applies under standard test conditions (STC): Irradiance of 1,000 W/m2 with an AM 1.5 spectrum at a cell temperature of 25℃.
The power output is subject to a manufacturing tolerance of + 10% / - 5%
Output values are post initial Stabler-Wronski decay; actual measured initial values will be greater (approximately 15% for power).
spECIfICATIONs (I) EXTERIOR DImENsIONs
*Cell amorphous silicon
*Dimensions & 43.5” x 51.4” x 1.57 ” (1106 x 1306 x 20 mm) frame 52.9 lbs 24 kg a BACK ViEW SiDE ViEW
Weight 43.3” x 51.1” x 0.25 ” (1100 x 1300 x 6.4mm) frameless 50.6 lbs 23 kg
*Cell Circuit 152 cells in series (total cells)
*Connection type Cable with MC-4 connector
*Bypass diodes 1
*Fire Rating Class C
spECIfICATIONs (II)
*Maximum system voltage 1,000 V DC
*Maximum mechanical load 5,400 Pa
*Series Fuse Rating 3A
*Operating temperature (cell) - 40 to +90 ℃
*Storage temperature - 40 to +90 ℃
*Storage air humidity Up to 90 %
*Installation orientation Portrait
A B C
Design and specifications are subject to changewithout notice.
43.5”/1106 mm 51.4”/1306 mm 0.78”/20 mm
Hisun is a registered trademark of Hisun Corporation. All other trademarks are property
of their respective owners. Contact Hisun to obtain the latest product manuals before using D E f
any Hisun device. 7.9”/203 mm 25.7”/653 mm 42.4”/1077 mm
G h J
3.9”/100 mm 0.6”/17 mm 35.4”/900 mm
HISUN PV TECHNOLOGY
No.6 Fuyang three road hengshui economic development zone
hebei province China.053000
1-800-HiSUNPV • Email: hisunpv@hisunpv.com
© 2010 Hisun PV Technology All rights reserved. www.hisunpv.com/
EVGR-05 • HSP-09-17