This document provides assembly instructions for a final drive on an excavator. It involves assembling and installing several components in the following order: installing bearings and determining shim thickness; installing seals; installing dowel pins; installing the housing on the motor housing; installing coupling gear, bolts, and ring gear; assembling carrier assemblies; installing gears, shafts, and retaining rings; installing the cover and testing for leaks. The process requires precision measurement and torque specifications to be followed for proper assembly.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
The Future of Autonomous Vehicles | civilthings.com | Detailed informationgettygaming1
civilthings.com Present Autonomous vehicles, also known as self-driving cars, represent a groundbreaking advancement in transportation technology. These vehicles utilize sophisticated sensors, advanced software, and machine learning algorithms to navigate roads and transport passengers without human intervention. Major companies in the autonomous vehicle industry are investing heavily in the development and testing of these innovative machines, aiming to enhance safety, efficiency, and convenience on the roads.
The autonomous vehicle market is rapidly expanding, driven by technological progress and increasing consumer interest. With the advent of autonomous vehicle technology, the future of transportation promises significant changes, including reduced traffic accidents and lower emissions. However, the widespread adoption of autonomous vehicles faces challenges, such as regulatory hurdles, safety concerns, and public acceptance.
Autonomous vehicle regulations and legislation are evolving to address these issues, ensuring that the integration of self-driving cars into everyday life is smooth and secure. As the industry grows, news and trends related to autonomous vehicles continue to capture global attention. From the development of cutting-edge sensors to advancements in autonomous vehicle software, this sector is poised to revolutionize how we think about mobility.
Stay informed about the latest in autonomous vehicle technology, industry developments, and market trends to understand the profound impact these vehicles will have on our future.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Why Isn't Your BMW X5's Comfort Access Functioning Properly Find Out Here
Caterpillar Cat 538 EXCAVATOR (Prefix JEY) Service Repair Manual (JEY00001 and up).pdf
1. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 538 EXCAVATOR JEY
Configuration: 538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
538 LL GF Forest Machine Machine Systems
Media Number -M0071454-01 Publication Date -01/08/2017 Date Updated -02/08/2017
i06723435
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 439-3938 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
E 439-3939 Link Bracket As 2
G 1U-5933 Duo-Cone Seal Installer As 1
H - Loctite C5A Copper Anti-Seize -
J - Loctite 5188 -
K 369-9451 Grease -
L - Loctite 243 -
M FT-2770 Leak Down Test Tool 1
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement. All disassembly and all assembly procedures
must be performed on a clean work surface and in a clean hydraulic area. Always keep cleaned
parts covered and protected.
1/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
2. Note: O-rings, gaskets, and seals should always be replaced. A used O-ring may not have the
same sealing properties as a new O-ring. Use Tooling (K) during the assembly procedure.
Note: Apply a light film of hydraulic oil to all components before assembly.
1. If necessary, install the sprocket.
Illustration 1 g01760833
2. Lower the temperature of bearings (44) and (46).
3. Use a suitable press to install bearings (44) and (46). Make sure that bearings (44) and (46)
contact the counterbore in housing (39).
4. Use the following procedure to preload the bearings and determine the correct thickness of
shims.
Illustration 2 g01760875
a. Attach Tooling (E) and a suitable lifting device to housing (39). Install housing (39)
onto motor housing (41).
b. Position housing (39) and motor housing (41) onto a suitable press. The combined
weight of housing (39) and motor housing (41) is approximately 82 kg (180 lb).
2/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Illustration 3 g01760892
(a) Bearing surface
(b) Housing surface
c. Use a suitable press and a spacer to apply a load of 4000 kg (8820 lb) on the bearings.
Rotate the housing to seat the bearings.
d. Reduce the load on the bearings to 1000 ± 100 kg (2200 ± 220 lb).
e. Use a depth micrometer to measure the step length between the bearing surface and
the housing surface. Take measurements at several different locations around the
housing. Compute the average of the measured dimensions and record the number.
Call this Dimension (Y).
Illustration 4 g01761534
f. Use a depth micrometer to measure the step length of coupling gear (38). Take
measurements at several different locations around coupling gear (38). Compute the
average of the measured dimensions and record the number. Call this Dimension (X).
g. The thickness of the shims is equal to (X − Y) ± 0.05 mm (0.002 inch).
Note: Use no more than two shims. If two shims are required, install the thinner shim
next to coupling gear (38).
3/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 5 g01760875
h. Use Tooling (E) and the suitable lifting device to remove housing (39) from motor
housing (41).
Illustration 6 g01761876
Note: The rubber seals and sealing surfaces must be clean and dry. Apply a thin film of
clean SAE 30 oil on the contact surfaces of the metal seals prior to assembly.
5. Use Tooling (G) to install Duo-Cone seal (45) in housing (39). Refer to Disassembly and
Assembly, "Duo-Cone Conventional Seals - Install".
Illustration 7 g01761954
4/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. 6. Use Tooling (G) to install Duo-Cone seal (43) in motor housing (41).
Illustration 8 g01760513
7. Apply Tooling (H) to the surfaces that contact dowel pins (42).
8. Install dowel pins (42).
Illustration 9 g01760875
Note: Do not damage the Duo-Cone seals in the housing or in motor housing (41) during
the assembly of the two components. After installation of the housing on motor housing
(41), there will be a small gap between the components. The gap is caused by the Duo-Cone
seals. This gap will be eliminated during installation of coupling gear (26) (not shown).
9. Attach Tooling (E) and a suitable lifting device to housing (39). The combined weight of
housing (39) and the final drive sprocket is approximately 82 kg (180 lb).
10. Install housing (39) on motor housing (41).
5/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 10 g01760477
11. Install shims (40) that were determined in Step 4.g in the housing.
Note: If two shims are required, install the thinner shim next to the coupling gear.
Illustration 11 g01760374
12. Install coupling gear (38).
13. Apply Tooling (L) to the clean threads and dry threads of bolts (37).
14. Install bolts (37) in an even pattern until coupling gear (38) is seated against the bearing.
Tighten bolts (37) in a crisscross pattern to a torque of 570 ± 80 N·m (420 ± 60 lb ft).
6/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 12 g01760357
15. Install O-ring seal (36).
Illustration 13 g01760259
16. Use two people to install ring gear (35). The weight of ring gear (35) is approximately 41 kg
(90 lb).
Illustration 14 g01760160
Illustration 15 g01760167
7/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 16 g01762255
17. Assemble carrier assembly (29), as follows.
a. Install bearings (33) in planetary gear (34).
b. Install thrust washers (32) and planetary gear (34) in carrier assembly (29).
c. Use a deburring tool to remove the metal burr from the openings in the carrier. Install
planetary shaft (30) in carrier assembly (29).
d. Align the split in spring pin (31) to the top or the bottom of the carrier. Make a stake
mark on each side of the spring pin hole. Dimension (AA) indicates the location of
the stake marks. Dimension (AA) is 2.25 ± 0.75 mm (0.089 ± 0.030 inch) from the
outside diameter of the spring pin hole to the stake.
e. Use a suitable hammer and a suitable punch to drive spring pin (31) into planetary
shaft (30).
f. Repeat Steps 17.a through 17.d to install the other two planetary gears in the carrier.
Illustration 17 g01760164
8/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. 18. Use two people to install carrier assembly (29). The weight of carrier assembly (29) is
approximately 39 kg (85 lb).
Illustration 18 g01760166
19. Install spacer (28) and gear (27).
Illustration 19 g01760159
Illustration 20 g01760153
9/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 21 g01758493
20. Assemble carrier assembly (21), as follows.
a. Install bearing (25) in planetary gear (26).
b. Install thrust washers (24) and planetary gear (26) in carrier assembly (21).
c. Use a deburring tool to remove the metal burr from the openings in the carrier. Install
planetary shaft (23) in carrier assembly (21).
d. Align the split in spring pin (22) to the top or the bottom of the carrier. Make a stake
mark on each side of the spring pin hole. Dimension (BB) indicates the location of the
stake marks. Dimension (BB) is 2.25 ± 0.75 mm (0.089 ± 0.030 inch) from the
outside diameter of the spring pin hole to the stake.
e. Use a suitable hammer and a suitable punch to drive spring pin (22) into planetary
shaft (23).
f. Repeat Steps 20.a through 20.d for the other two planetary gears in the carrier.
Illustration 22 g01760663
10/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 ...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. 21. Install carrier assembly (21) into ring gear (35).
22. Install retaining ring (20).
Illustration 23 g01760645
23. Install spacer (19) and gear (18).
Illustration 24 g01760655
Note: Make sure that the oil passages in shafts (17) are oriented toward the center of carrier
assembly (16).
11/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 ...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. 24. Raise the temperature of carrier assembly (16). Lower the temperature of (17) shafts. Install
shafts (17) into carrier assembly (16) until the groove of shafts (17) is at Dimension (A).
Dimension (A) equals 21.70 ± 0.10 mm (0.854 ± 0.004 inch).
25. Make eight stake marks at distance of Dimension (C) from each shaft (17). Dimension (C)
equals 2.0 ± 1.0 mm (0.08 ± 0.04 inch). The width of each stake mark should be equal to
Dimension (B). Dimension (B) equals 4.0 ± 1.0 mm (0.16 ± 0.04 inch).
Illustration 25 g01760651
26. Assemble carrier assembly (16), as follows.
a. Install carrier assembly in position on gear (18).
Illustration 26 g01760641
b. Install retaining ring (15) onto gear (18).
12/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 ...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 27 g01760647
c. Install washer (12) and bearing assembly (14).
d. Install gear (13) and second washer (12).
e. Use Tooling (C) to install retaining ring (11).
f. Repeat Steps 26.a through 26.e for the other two planetary gears.
Illustration 28 g01760669
27. Install spacer (10) and gear (9).
Illustration 29 g01760650
13/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 ...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. 28. Install O-ring seal (8) on plugs (5).
Illustration 30 g01760653
29. Install plugs (5) in cover (1). Install one 8.00 mm (0.315 inch) plate (7).
30. Position gear (6) and install bolts (4).
Illustration 31 g01751153
Illustration 32 g01751055
31. Place a piece of solder in the center of gear (9) (not shown).
14/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 ...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Note: You may need to apply some grease to the solder to keep the solder in position on
gear (9).
32. Use Tooling (B) and a suitable lifting device to install cover (1). The weight of cover (1) is
approximately 32 kg (70 lb).
33. Install four bolts (2) at 90 degrees from each other. Tighten bolts (2) in a crisscross pattern
to a torque of 420 ± 60 N·m (310 ± 44 lb ft). Turn bolts (2) and additional 60 ± 5 degrees.
34. Remove bolts (2).
35. Use Tooling (B) and a suitable lifting device to remove cover (1). The weight of cover (1) is
approximately 32 kg (70 lb).
36. Use a micrometer to measure the thickness of the solder. Record this measurement to
determine the required thickness of plates (7). Adjust plates (7) to obtain a clearance of
1.000 + 1.000 mm (0.0394 + 0.0394 inch) between plate (7) and gear (9).
37. Apply Tooling (J) to the mating surfaces of cover (1) and the housing.
38. Use Tooling (B) and a suitable lifting device to install cover (1). The weight of cover (1) is
approximately 32 kg (70 lb).
39. Install bolts (2). Tighten bolts (2) in a crisscross pattern to a torque of 420 ± 60 N·m
(310 ± 44 lb ft). Turn bolts (2) and additional 60 ± 5 degrees.
Illustration 33 g06092181
40. Remove plug (5) (not shown). Attach Tooling (M) to the cover. Reduce the air pressure at
the source to 103 kPa (15 psi). Apply air pressure to Tooling (M). This air will test the Duo-
Cone seals.
41. Use the ball valve on Tooling (M) to eliminate the air pressure to the final drive. A pressure
of 98 kPa (14.2 psi) must be maintained for 30 seconds.
42. Remove Tooling (M). Install plug (5) (not shown). Tighten plug (5) to a torque of
80 ± 10 N·m (59 ± 7 lb ft).
43. Remove the final drive from Tooling (A). The weight of the final drive assembly is
approximately 365 kg (785 lb).
15/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 ...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. 44. If necessary, install the sprocket.
End By:
a. Install the final drive.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Feb 5 09:43:32 UTC+0800 2021
16/16
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 ...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 538 EXCAVATOR JEY
Configuration: 538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
538 LL GF Forest Machine Machine Systems
Media Number -M0071454-01 Publication Date -01/08/2017 Date Updated -02/08/2017
i06724220
Swivel - Remove and Install
SMCS - 5060-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 1U-9200 Lever Puller Hoist 1
C 439-3938 Link Bracket 2
Start By:
a. Release the hydraulic system pressure.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 1 g01344378
Typical Example
1. Install Tooling (A) onto the hydraulic tank . Attach an air supply hose onto Tooling (A).
Apply 276 ± 414 kPa (40 ± 60 psi). This procedure will pull a vacuum on the hydraulic
system.
Illustration 2 g01344679
2. Remove bolts (2) and covers (1).
Illustration 3 g01344678
2/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. 3. Disconnect hose assemblies (6). Disconnect fitting (7). Disconnect hose assemblies (3).
Remove fittings (5). Remove bolts (4).
Illustration 4 g01349819
4. Remove bolts (9) and platform assembly (8).
Illustration 5 g01343207
5. Disconnect hose assemblies (10). Remove the bolts from bracket (11). Reposition bracket
(11) out of the way.
3/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 6 g01343208
6. If necessary, use Tooling (B) to secure the hose assemblies out of the way. Disconnect the
hose assembly and remove fitting (12). Remove support (17). Loosen clamp (13). Remove
bolts (14), retainer (15), and boot (16).
Illustration 7 g01344693
7. Attach Tooling (C) and a suitable lifting device to swivel (18). The weight of swivel (18) is
approximately 102 kg (225 lb). Remove swivel (18).
Installation Procedure
1. Install swivel (18) in the reverse order of removal.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Feb 5 09:44:27 UTC+0800 2021
4/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 538 EXCAVATOR JEY
Configuration: 538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
538 LL GF Forest Machine Machine Systems
Media Number -M0071454-01 Publication Date -01/08/2017 Date Updated -02/08/2017
i06724515
Swivel - Disassemble
SMCS - 5060-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 439-3940 Bracket As 2
Start By:
a. Remove the swivel.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Put orientation and location marks on housings for installation purposes.
1. Thoroughly clean the outside of the swivel prior to disassembly.
1/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 1 g01767936
2. Attach Tooling (B) and a suitable lifting device to swivel (1). The weight of swivel (1) is
approximately 496 kg (225 lb).
3. Position swivel (1) onto Tooling (A).
Illustration 2 g01768234
4. Remove bolts (2) and (3).
5. Remove cover (4) from the bottom of swivel (1).
Illustration 3 g01768296
2/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. 6. Remove O-ring seal (5), bolts (6), and retainer (7) from the bottom of swivel (1).
Illustration 4 g01768395
Illustration 5 g01768497
Note: Be sure that alignment marks are put on rotor (8) and housing (11) for assembly
purposes.
7. Use Tooling (B) and a suitable lifting device to separate rotor (8) from housing (9).
8. Remove O-ring seal (10) (not shown) from housing (11).
9. Use Tooling (B) and a suitable lifting device to separate rotor (8) from housing (11).
3/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Illustration 6 g06092449
10. Remove seal assemblies (12) from housing (11).
Illustration 7 g06092455
11. Remove seal assemblies (13) from housing (9).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Feb 5 09:45:23 UTC+0800 2021
4/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 538 EXCAVATOR JEY
Configuration: 538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
538 LL GF Forest Machine Machine Systems
Media Number -M0071454-01 Publication Date -01/08/2017 Date Updated -02/08/2017
i06724539
Swivel - Assemble
SMCS - 5060-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 439-3940 Bracket As 2
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Check the O-ring seals and the seals for wear or for damage. Replace the components, if
necessary.
1/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. Illustration 1 g01768813
1. Apply clean hydraulic oil to seal assemblies (12).
2. Install O-ring seal (10) and seal assemblies (12) into housing (11).
Illustration 2 g01768833
3. Position housing (9) onto housing (11). Loosely install bolts (2) to secure housing (9) to
housing (11).
4. Apply clean hydraulic oil to seal assemblies (13).
5. Install seal assemblies (13) into housing (9).
2/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. Illustration 3 g01769453
6. Use two people to position housing (9) and housing (11) onto Tooling (A). The combined
weight of housing (9) and housing (11) is approximately 41 kg (91 lb).
Illustration 4 g01769537
7. Attach Tooling (B) and a suitable lifting device to rotor (8). The weight of rotor (8) is
approximately 54 kg (119 lb).
8. Use Tooling (B) and a suitable lifting device to install rotor (8) into housing (11) and
housing (9) (not shown).
9. Remove four bolts (2) (not shown).
3/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. Please write to us.
Our email:
aservicemanualpdf@yahoo.com
Please go to the homepage
to get the full manual, or
other brand PDF manuals.
Home Site:
aservicemanualpdf.com
29. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
30. Illustration 5 g01768296
10. Install retainer (7), bolts (6), and O-ring seal (5) to the bottom of swivel (1).
Illustration 6 g01768234
11. Install cover (4), bolts (3), and bolts (2) to the bottom of swivel (1).
End By:
a. Install the swivel.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Feb 5 09:46:19 UTC+0800 2021
4/4
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
31. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 538 EXCAVATOR JEY
Configuration: 538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
538 LL GF Forest Machine Machine Systems
Media Number -M0071454-01 Publication Date -01/08/2017 Date Updated -02/08/2017
i06725205
Swing Motor - Remove and Install
SMCS - 5058-010-ZW
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 439-3938 Link Bracket 2
Start By:
a. Release the hydraulic system pressure.
Illustration 1 g01714793
1. Remove guard assembly (1).
1/5
538 Forest Machine Log Loader JEY00001-UP (MACHINE) POWERED BY C7.1 En...
2021/2/5
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...