Published indian patent and design registration information august 8th, 2014

The Patent Office Journal 08/08/2014 31041
OFFICIAL JOURNAL
OF
THE PATENT OFFICE
. 32/2014 ु ü : 08/08/2014
ISSUE NO. 32/2014 FRIDAY DATE: 08/08/2014
का एक
PUBLICATION OF THE PATENT OFFICE

INTRODUCTION
In view of the recent amendment made in the Patents Act, 1970 by the Patents (Amendment) Act, 2005
effective from 01st
January 2005, the Official Journal of The Patent Office is required to be published under
the Statute. This Journal is being published on weekly basis on every Friday covering the various proceedings
on Patents as required according to the provision of Section 145 of the Patents Act 1970. All the enquiries on
this Official Journal and other information as required by the public should be addressed to the Controller
General of Patents, Designs & Trade Marks. Suggestions and comments are requested from all quarters so that
the content can be enriched.
(Chaitanya Prasad)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS
8TH
AUGUST, 2014

CONTENTS
SUBJECT PAGE NUMBER
JURISDICTION : 31044 – 31045
SPECIAL NOTICE : 31046 – 31047
EARLY PUBLICATION (DELHI) : 31048 – 31071
EARLY PUBLICATION (MUMBAI) : 31072 – 31079
EARLY PUBLICATION (CHENNAI) : 31080 – 31105
EARLY PUBLICATION (KOLKATA) : 31106 – 31112
PUBLICATION AFTER 18 MONTHS (DELHI) : 31113 – 31293
PUBLICATION AFTER 18 MONTHS (MUMBAI) : 31294 – 31387
PUBLICATION AFTER 18 MONTHS (CHENNAI) : 31388 – 31580
PUBLICATION AFTER 18 MONTHS (KOLKATA) : 31581 – 31603
PUBLICATION U/R 84[3] IN RESPECT OF APPLICATION
FOR RESTORATION OF PATENTS (KOLKATA) : 31604
PUBLICATION U/S.60 IN RESPECT OF APPLICATION
FOR RESTORATION OF PATENTS (KOLKATA) : 31605
PUBLICATION UNDER SECTION 43(2) IN RESPECT OF
THE GRANT (DELHI) : 31606 – 31611
THE GRANT (MUMBAI) : 31612 – 31614
THE GRANT (CHENNAI)
: 31615 – 31616
THE GRANT (KOLKATA) : 31617 – 31618
INTRODUCTION TO DESIGN PUBLICATION : 31619
COPYRIGHT PUBLICATION : 31620
THE DESIGNS ACT 2000 SECTION 30 DESIGN
ASSIGNMENT
: 31621
REGISTRATION OF DESIGNS : 31622 - 31658

THE PATENT OFFICE
KOLKATA, 08/08/2014
Address of the Patent Offices/Jurisdictions
The following are addresses of all the Patent Offices located at different places having their Territorial
Jurisdiction on a Zonal basis as shown below:-
1 Office of the Controller General of Patents,
Designs & Trade Marks,
Boudhik Sampada Bhavan,
Near Antop Hill Post Office,S.M.Road,Antop Hill,
Mumbai – 400 037
Phone: (91)(22) 24123311,
Fax : (91)(22) 24123322
E-mail: cgpdtm@nic.in
4 The Patent Office,
Government of India,
Intellectual Property Rights Building,
G.S.T. Road, Guindy,
Chennai – 600 032.
Phone: (91)(44) 2250 2081-84
Fax : (91)(44) 2250 2066
E-mail: chennai-patent@nic.in
 The States of Andhra Pradesh, Karnataka,
Kerala, Tamil Nadu and the Union
Territories of Puducherry and Lakshadweep.
Near Antop Hill Post Office,S.M.Road,Antop Hill,
Mumbai – 400 037
Phone: (91)(22) 24137701
Fax: (91)(22) 24130387
E-mail: mumbai-patent@nic.in
 The States of Gujarat, Maharashtra, Madhya
Pradesh, Goa and Chhattisgarh and the Union
Territories of Daman and Diu & Dadra and Nagar
Haveli
Plot No. 32., Sector-14, Dwarka,
New Delhi – 110075
Phone: (91)(11) 2808 1921 – 25
Fax: (91)(11) 2808 1920 & 2808 1940
E.mail: delhi-patent@nic.in
 The States of Haryana, Himachal Pradesh, Jammu
and Kashmir, Punjab, Rajasthan, Uttar Pradesh,
Uttaranchal, Delhi and the Union Territory of
Chandigarh.
5 The Patent Office (Head Office),
CP-2, Sector –V, Salt Lake City,
Kolkata- 700 091
Phone: (91)(33) 2367 1943/44/45/46/87
Fax: (91)(33) 2367 1988
E-Mail: kolkata-patent@nic.in
 Rest of India
Website: www.ipindia.nic.in
www.patentoffice.nic.in
All applications, notices, statements or other documents or any fees required by the Patents Act, 1970
and The Patents (Amendment) Act, 2005 or by the Patents (Amendment) Rules, 2006 will be received
only at the appropriate offices of the Patent Office.
Fees: The Fees may either be paid in cash or may be sent by Bank Draft or Cheques payable to the Controller of
Patents drawn on a scheduled Bank at the place where the appropriate office is situated.

कोलकाता, 08/08/2014
ê
पते
:-
1 : , ,
हन,
,
एस. एम. रोड, , ु - 400 037, भारत,
फोन: (91) (22) 24123311
: (91) (22) 24123322
ई. मेल: cgpdtm@nic.in
4 , भारत सरकार
ु ,
एसआईडीसीओ आरए
एड ु , जी. एस. . रोड,
- 600 032.
फोन: (91)(44) 2250 2081-84
: (91)(44) 2250-2066
ई. मेल: chennai-patent@nic.in
 , , के रल, ु
ु ु ,
,
,
एस. एम. रोड, , ु - 400 037,
फोन: (91) (22) 24137701
: (91) (22) 24130387
ई. मेल: Mumbai-patent@nic.in
 गजरातु , , , गोवा तथा
, दमन
, .
,
सं. 32, - 14, , - 110 075.
फोन: (91)(11) 2808 1921-25
: (91)(11) 2808 1920, 2808 1940
ई. मेल: delhi-patent@nic.in
, , ू ,
पंजाब, , ,
,
कोलकाता, ( )
,
सीपी-2, - V, ,
कोलकाता-700 091, भारत.
फोन: (91)(33) 2367 1943/44/45/46/87
:/Fax: (91)(33) 2367 1988
ई. मेल: kolkata-patent@nic.in
 भारत का
वेबसाइट: http://www.ipindia.nic.in
www.patentoffice.nic.in
, 1970 तथा (संशोधन) , 2005 अथवा (संशोधन) , 2006 वां सभी आवेदन,
सचनाएू , ु ु ृ
ु : ु Controller of Patents
ु ू त ु

SPECIAL NOTICE
18 Months publication as required under Section 11A of the Patents Act, 1970
as amended by the Patents (Amendment) Act, 2005.
Notice is hereby given that any person at any time before the grant of Patent may give representation by way of
opposition to the Controller of Patents at appropriate office on the ground and in a manner specified under
section 25(1) of the Patents (Amendment) Act, 2005 read with Rule 55 of the Patents (Amendment) Rules,
2006.
Notice is also given that if any interested person requests for copies of the complete specification, drawing and
abstract of any application already published, the photocopy of the same can be supplied by the Patent Office as
per the jurisdiction on payment of prescribed fees of Rs.4/- per page. If any further details are required to be
obtained, the same can be provided by the respective Patent Offices on request.
(Chaitanya Prasad)
CONTROLLER GENERAL OF PATENTS, DESIGNS & TRADE MARKS

SPECIAL NOTICE
Under the new provision of the Patents Act, 1970 as amended by the Patents (Amendment) Act, 2005
and Rules there under, Publication of the matter relating to Patents in the Official Gazette of India Part III,
Section 2 has been discontinued and instead The Official Journal of the Patent Office is being published
containing all the activities of The Patent Office such as publication of all the patent applications after 18th
months , grant of patents & all other information in respect of the proceedings as required under the provisions
of the Patents (Amendment) Act, 2005 and Rules thereunder on weekly basis on every Friday.
The Journal is uploaded in the website every Friday. So Paper form and CD-ROM form of the Journal are
discontinued from 01/01/2009.
SPECIAL NOTICE
Every effort is being taken to publish all the patent applications under section 11(A) of the Patents Act.
However, if duplication of publication of any application is found, then earlier date of publication will be taken
for the purpose of provisional protection for applicant and Patent Office will grant Patent not before six months
from the date of second publication, provided that there is there is no third party representation.

Early Publication:
The following patent applications have been published under section 11A (2) of The Patents (Amendment) Act 2005 and rule
24A of The Patents (Amendment) Rules, 2006. Any person may file representation by way of opposition to the Controller of
Patents at the appropriate office against the grant of the patent in the prescribed manner under section 25(1) of the Patents
(Amendment) Act 2005 read with the rule 55 of The Patents (Amendment) Rules, 2006:
(12) PATENT APPLICATION PUBLICATION (21) Application No.1656/DEL/2014 A
(19) INDIA
(22) Date of filing of Application :20/06/2014 (43) Publication Date : 08/08/2014
(54) Title of the invention : ELECTRICAL POWER GENERATION USING TWO DIESEL ENGINES OR WIND/WATER
TURBINES AND ONE GENERATOR HAVING BOTH THE MAGNETIC FIELD AND ARMATURE WINDINGS ROTATING
IN OPPOSITE DIRECTIONS.
(51) International classification :H02P9/04
(31) Priority Document No :NA
(32) Priority Date :NA
(33) Name of priority country :NA
(86) International Application No
Filing Date
:NA
:NA
(87) International Publication No : NA
(61) Patent of Addition to Application Number
Filing Date
:NA
:NA
(62) Divisional to Application Number
Filing Date
:NA
:NA
(71)Name of Applicant :
1)PRITAM SINGH
Address of Applicant :H.NO. 79, SECTOR 11A,
CHANDIGARH-160011, INDIA
2)GURCHARAN SINGH
(72)Name of Inventor :
1)PRITAM SINGH
2)GURCHARAN SINGH
(57) Abstract :
Thus far the electric power is generated when a prime mover rotates the rotor of an electric generator that ·is coupled to it. The rotor of
the generator generally carries the field coils which produce the magnetic field whose strength depends upon the material of the poles,
the· number of turns in field winding and the current flowing through it. The stator of the generator contains armature winding laid out
in slotted punchings secured inside the outer stator frame. Thus with the rotation of the generator rotor, the conductors in the stator cut
magnetic lines of force and consequently emf (voltage) is induced in the armature(stator) winding. Induced voltage depends upon the
strength of the field and its speed of rotation. As the strength of magnetic field cannot be increased beyond saturation levels, the only
means left to increase voltage, and thus the power generated, is through the increase in speed of prime mover which has limitations.
The inventors have chosen, instead, to increase the speed of flux-cutting through a novel method in which, while one existing prime
mover continues to rotate the rotor of the generator, the 2nd prime mover, which may be identical to the existing one, is coupled to the
existing stator from the other end and thus this existing stator also becomes a rotor. Thus we have a system in which there are two
prime movers placed on either side of the generator in question. While one prime mover is coupled to and rotates the inner rotor of the
generator( housing field winding), the· other prime mover is coupled to and rotates the outer rotor of generator (housing armature
winding) from the other end of generator in opposite direction. Thus there are two prime movers, and one generator having two rotors
and no stator. As the rotors rotate in opposite directions, the speed of flux-cutting and the power generated gets increased in proportion
to the increased relative speed of the two rotors. If the 2nd prime mover runs at the speed identical to the 1st prime mover, power
generated gets nearly doubled. Thus, with our invention though there are two prime movers, there is only one generator, modified to
convert this power of two prime movers into electrical energy. Broadly speaking, one generator is eliminated
No. of Pages : 10 No. of Claims : 4

(19) INDIA
(54) Title of the invention : WPAN BASED MULTI-NODE LED DYNAMIC DISPLAY DEVICE SYSTEM
(51) International classification :G09G3/32
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Rajesh Singh
Address of Applicant :S/o Shri Bhuru Singh, Village-Majhon,
P.O- Paundha , Premnagar, Dehradun UTTARAKHAND 248007,
India.
2)Anita
3)Bhupendra Singh
4)Vivek Kaundal
5)Sushabhan Choudhury
6)Anant Wadhwa
1)Rajesh Singh
2)Anita
3)Bhupendra Singh
4)Vivek Kaundal
5)Sushabhan Choudhury
6)Anant Wadhwa
(57) Abstract :
Present invention relates to a LED display device with scrolling message controlled by a centralized controller equipped with RFID
technology, for the institutes/railway stations/bus stands/shopping malls, where regular up gradation of notice/ message is required.
The system comprises of a microcontroller development board interfaced with RF module and LED matrix for displaying the data. A
dynamic LED scrolling display which provides flexibility in how to display information and uses a wide array of options for data
elements, using wireless technology is proposed to construct an energy efficient and versatile electronic display board Multiple
displays on different locations can be used to display same notice or message.

(19) INDIA
(54) Title of the invention : AN APPLIANCE FOR CORRECTING AN IMPACTED TOOTH
(51) International classification :A61C3/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DR. DEVINDER PREET SINGH
Address of Applicant :MOHALI MEDICAL CENTER,
PHASE-2, OPPOSITE BASSI CINEMA, MOHALI, PUNJAB,
PIN-160055, INDIA.
1)DR. DEVINDER PREET SINGH
(57) Abstract :
According to this invention, it uses a kit for making an appliance for the correction of the cuspid or other tooth which is no longer tied
to the leveling and alignment of the remainder of the arch. The unique feature of this system is in treating malocclusions that are
complicated with the correction of malocclusions addressed independently of the impacted tooth. More specifically, the impacted
tooth appliance includes a kit comprising a modelling wax, light wire plier ,working dental stone model, flux ,Universal Plier ,19 x 25
Stainless steel wire,Silver Solder Wire, Hard Wire Cutter,19 Gauge Round Stainless Steel Wire, microtorch, glass marking pencil. In
particular the fabrication of the appliance for correction of the impacted tooth involves fabrication of an lingual arch from the 19
gauge round stainless steel archwire having the measurement of upto the first permanent molar teeth on the lingual side. The round
wire is then angle bend, making U shaped bend bilaterally, with the the two arms of the U extending in between the first and the
second premolar teeth lingually, with a round beak of the universal piler. The wire alongwith the U bends is then adapted on the
lingual side of the working dental stone model upto the stainless steel bands after which the excess wire is cut with the help of a hard
wire cutter. The wire framework is so adapted that it lies a little below the level of the front teeth on the working model. After the
adaptation the wire framework of the lingual arch is stabilized using modelling wax. Then the length of spring from the coil is marked
depending upon the location of impacted canine and its free end is tagged to engage attachments. Thus after formation of single coil
spring it is stabilized alongwith the lingual arch and then soldered with it as well as the stainless steel band on the working model
using the flux, silver solder wire and the microtorch. After the soldering, the whole of the appliance unit is removed from the working
model and cleaned and polished. The finished and polished appliance is then cemented on the first permanent molar teeth using a glass
ionomer dental cement resulting in to formation of an appliance for the correction of the concerned impacted tooth.

(19) INDIA
(54) Title of the invention : A SYSTEM AND METHOD FOR LOCATING AN INJURED OR A NON-RESPONSIVE PERSON
(51) International classification :A61H7/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Rajesh Singh
Address of Applicant :S/o Shri Bhuru Singh, Vill-Majhon,
P.O- Paundha, Premnagar, Dehradun UTTARAKHAND 248007
INDIA
2)Anita
3)Abhishek
4)Praveen Kumar
5)Purnendu Shekhar Pandey
6)Anant Wadhwa
1)Rajesh Singh
2)Anita
3)Abhishek
4)Praveen Kumar
5)Purnendu Shekhar Pandey
6)Anant Wadhwa
(57) Abstract :
Present invention relates to a system which is used for casualty locator for defense using wireless communication based on RF
module. The system comprises communication between slave units and master unit. The master unit comprises of a microcontroller
board interfaced with RF module and switch array. The slave unit comprises microcontroller board, RF module and heart beat sensor.
Multiple slave units are dedicated to different users and every slave unit will communicate with master unit.

(19) INDIA
(54) Title of the invention : CYCLE RICKSHAW ATTACHMENT TO ASSIST ELDERLY INGRESS AND EGRESS
(51) International classification :B62M1/36
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SIDDHARTH BHARDWAJ
Address of Applicant :DEPARTMENT OF MECHANICAL
ENGINEERING, ALIGARH MUSLIM UNIVERSITY,
ALIGARH-202002, Uttar Pradesh India
2)DR. ABID ALI KHAN
1)SIDDHARTH BHARDWAJ
2)DR. ABID ALI KHAN
(57) Abstract :
THE DESIGN CLAIMS A UNIQUE STEPPING MECHANISM FOR THE CYCLE RICKSHAW THAT WILL AID THE
ELDERLY PASSENGERS DURING INGRESS AND EGRESS. 1. REDUCTION IN TRUNK FLEXION DURING STEPPING IN
AND OUT, 2. REDUCTION IN PHYSICAL EFFORT REQUIRED DURING INGRESS AND EGRESS COMPARABLE TO
CURRENT CYCLE RICKSHAW DESIGN, 3. INCREASED USABILITY OF RICKSHAWS FOR ELDERLY PASSENGERS.

(19) INDIA
(54) Title of the invention : THERMAL INSULATING MATERIALS COMPRISING EICHHORNIA CRASSIPES
(51) International classification :E04B1/80
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Manik Sharma
Address of Applicant :S/o Surinder Sharma, Junior Research
Fellow, Department of Botanical & Environmental Sciences, Guru
Nanak Dev University, Amritsar-143005 (Punjab) India
2)Dr. Ashwani Kumar Thukral
3)Dr. Renu Bhardwaj
1)Manik Sharma
2)Dr. Ashwani Kumar Thukral
3)Dr. Renu Bhardwaj
(57) Abstract :
Present invention relates thermal insulating materials. More particularly, present invention provides thermal insulating materials
comprising a filling of dried Eichhornia crassipes whole plant or petioles thereof, as thermal insulating material.

(19) INDIA
(54) Title of the invention : AN IMPROVED COMBINED LOCK MECHANISM FOR TWO-WHEELERS
(51) International classification :B62H5/00
Filing Date
:NA
:NA
Filed on
:
:01/01/1900
Filing Date
:NA
:NA
1)JAY USHIN LTD.
Address of Applicant :PLOT NO. 282, PHASE - 6, SECTOR
37, GURGAON, HARYANA, INDIA.
1)RAMESH YADAV
2)ANIL KUMAR
3)YASHBIR
4)SUNIL GUPTA
(57) Abstract :
THE PRESENT SUBJECT MATTER RELATES TO AN IMPROVED IGNITION SWITCH OPERATED COMBINED LOCK
MECHANISM IN TWO-WHEELERS THAT INCLUDES AN IGNITION KEY INSERTED IN THE IGNITION SWITCH FOR
ACTUATING THE COMBINED LOCK MECHANISM PROVIDED WITH AN IMMOBILIZER SYSTEM. THE TWO
WHEELERS ARE PROVIDED WITH AN IGNITION BODY RECEIVING A MOVABLE IGNITION LOCK CYLINDER
ATTACHED TO THE IGNITION SWITCH. FURTHER, THE COMBINED LOCK MECHANISM IS PROVIDED WITH A CAM
ROTATABLY POSITIONED IN THE IGNITION BODY IN A MANNER THAT A RESTRICTED ROTATION OF THE
IGNITION KEY TRANSFERS THE MOVEMENT OF THE CAM TO A SWITCH CASE ASSEMBLY VIA A SLIDER CASE
ASSEMBLY. THE PRESENT SUBJECT MATTER DISCLOSES THAT THE SLIDER CASE ASSEMBLY INCLUDES A SEAT
OPENING SLIDER AND A FUEL TANK OPENING SLIDER DISPOSED IN RESPECTIVE CASE SLOTS DEVISED ON THE
OPPOSITE SIDE OF THE CAM IN THE SLIDER CASE ASSEMBLY. THE SEAT OPENING SLIDER AND THE FUEL TANK
OPENING SLIDER ARE SELECTIVELY PUSHED BY RESPECTIVE MOVABLE CARRIER ELEMENTS PROVIDED WITH
THE CAM. FURTHER, THE MOVEMENTS OF THE SEAT OPENING SLIDER AND THE FUEL TANK OPENING SLIDER
PULL THE CABLES CONNECTED TO A SEAT COVER AND A FUEL TANK LOCK RESPECTIVELY. THE COMBINED
LOCK MECHANISM ALSO DISCLOSES THAT A TERMINAL BASE ASSEMBLY IS ATTACHED TO THE SLIDER CASE
ASSEMBLY

(19) INDIA
(54) Title of the invention : A TRANSMISSION SHIFTER ASSEMBLY FOR A VEHICLE AND METHOD OF ASSEMBLING
THE SAME
(51) International classification :F16H59/10
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)LUMAX MANNOH ALLIED TECHNOLOGIES
LIMITED
Address of Applicant :B-86, MAYAPURI INDUSTRIAL
AREA, PHASE-I, NEW DELHI-110064, INDIA
1)JAKHMOLA, VIVEK KUMAR
2)SINGH, SHAILENDRA KUMAR
(57) Abstract :
The present invention provides a transmission shifter assembly (1 00) for a vehicle and method of assembling the same. The assembly
comprising a shift lever (104) transferable between gear engaging positions; a base (108) to be mounted on to the vehicle; a shifter box
(1 16) attached to said base (1 08); a socket liner (110) and a fixation shaft (112). Wherein said socket liner (11 0) pivotally engaging
said pivot ball sub assembly (106) and said fixation shaft (112) engaging said socket liner (110) with said shifter box (116).

(19) INDIA
(54) Title of the invention : LAMINATION FOR ADJUSTING A FLUX PATH OF A WASHING MACHINE MOTOR
(51) International classification :H02K1/27
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MAJESTIC AUTO LIMITED
Address of Applicant :B-06, EcoTech-1, Extension Kasna,
Greater Noida, Uttar Pradesh-201308, India.
1)AAYUSH MUNJAL
2)V KOTESWARA RAO
(57) Abstract :
The present disclosure is directed towards a lamination for adjusting a flux path of washing machine motor. The lamination includes a
plurality of rotor lamination slots arranged in a circular fashion to receive rotor conductors, a set of slots arranged at an upper side of
the plurality of rotor lamination slots in a predetermined size for accommodating windings, a shaft hole situated at a center of the
plurality of rotor lamination slots to receive the washing machine motor shaft, a set of ventilation holes arranged around the shaft hole
in a predetermined distance to provide ventilation, and a set of bolt holes placed at corners of a lamination for fixing to the washing
machine motor through one or more bolts.

(19) INDIA
(54) Title of the invention : INTEGRATED SOFTWARE PLATFORM FOR ENABLING 3D PRINTING ECOSYSTEM
INTERFACES AND SERVICES
(51) International classification :G06T17/30
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)HCL Technologies Ltd.
Address of Applicant :A - 8/9, Sector 60 Noida - 201301 U.P.
(India)
1)Akhilesh Kumar Gupta
2)Mukta Agarwal
(57) Abstract :
An integrated platform for 3D printing. This invention relates to 3D printing systems and more particularly to an integrated platform
for enabling 3D printing and development of the integrated platform. The principal object of this invention is to propose a
configurable 3D printing unified service platform that enables various players in a 3D printing ecosystem to interface and manage
various services around 3D printing. Another object of the invention is to propose a method and system for creating a configurable 3D
printing unified service platform that enables various players in a 3D printing ecosystem to interface and manage various services
around 3D printing.

(19) INDIA
(54) Title of the invention : M.S. STEEL SUGAR CANE KOLHU.
(51) International classification :C13B10/06
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)M. YAMIN
Address of Applicant :S.B. ENGINEERING WORKS 913/1,
RAMPURI MUZAFFARNAGAR 251001 Uttar Pradesh India
1)M. YAMIN
(57) Abstract :
This invention of M.S. Steel kolhu is a device to provide a high productivity in the fild of crushing before this production was very
low and this invention has made a revolution from the point of view of the production, in the industry.

(19) INDIA
(54) Title of the invention : WPAN BASED SMART REMOTE CONTROL FOR HEATER
(51) International classification :G05B15/02
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Anant Wadhwa
Address of Applicant :S/o Dr. Anshu Kumar, #5397/1,
Modern Housing Complex, Manimajra, Chandigarh 160101,
India
2)Rajesh Singh
3)Dr. Piyush Kuchhal
4)Bhupendra Singh
5)Anita
1)Anant Wadhwa
2)Rajesh Singh
3)Dr. Piyush Kuchhal
4)Bhupendra Singh
5)Anita
(57) Abstract :
Present invention relates to a system for remote controlling of heater. The system is basically designed for saving energy resources
which are at their crucial stage of utility.The system of instant invention is an intelligent control of device for domestic energy
optimization through remote control.The remote control uses dimmer-switches designed indigenously which is very useful for end
users in the present scenario. The system allows users to optimize the power consumption of the heater which are connected to the
residential power network. The heaters are placed over railings for movement as and when required by proximity sensors.

(19) INDIA
(54) Title of the invention : CHARGE I.C.ENGINE
(51) International classification :F02B43/10
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MUKESH KUMAR VIDYARTHI
Address of Applicant :AWAS VIKAS COLONY, H.NO. 38/1,
EWS HALDWANI, DISTT. NANITAL, UTTRAKHAND. PIN
NO.263141 India
1)MUKESH KUMAR VIDYARTHI
(57) Abstract :
In Diesel engine intake part we are adding one electron gun in which fuel is polarized by the electron, because of this fuel internal
energy (translational kinetic energy, rotational kinetic energy, vibration kinetic energy, vibration potential energy ) will be increase,
and it is obvious that when internal energy of our fuel will be increase then we can achieve maximum combustion, after that fuel is
going inside the injector and move tocylinder TDC (top dead centre) in which fuel is burnt with respect to air and maximum amount
of fuel will be burnt and piston moves towards (TDC)top dead centre to (BDC)bottom dead centre and subsequently more power will
be formed and finally piston moves towards BDC Bottom dead centre to TDC top dead centre, and less amount of ionized un burnt
gas ( COX , NO,, H,C,) will be dissipated in the exhaust part, and our piston run at a higher RPM, to take the advantage of ionized un
burnt gas we are adding one group of thin Hard Copper square lattice, or any conducting material like copper or anything else in the
exhaust part, In which in exhaust part all electrons or ions will deposited in the square lattice, and this hard copper square lattice will
join a connecting wire (which is coated with polymer) and this wire is joint with conducting hollow cylinder metal which is joint in
the centre part of the intake fuel pipe and in centre of the hollow cylinder we are adding one another conducting material wire which is
connected with positive potential of the battery, this cylinder which is connected with exhaust square lattice, this arrangement is
behave like a capacitor, when our fuel is coming ions or electrons will try to jump towards bigger hollow cylinder to conducting
material wire which is placed in the centre of the hollow cylinder and this charge.or ions will mixed with our fuel, and fuel is behave
like a dielectric constant (K), basically in the starting time we are producing electrons only few seconds after that thjs process will be
continue, when our diesel engine will stop this charge will stored in the capacitor if there is no leakage, we are adding no of plates
which is behave like a capacitor according to our requirement or size of our engine cylinder which is may be parallel plate capacitor or
may be series base capacitor as per our requirements or make our combustion comfortable, only starting time we are taking electrons
only few seconds after that this charge or ions will stored in this parallel or series base capacitor when our engine will be stop, and
when our engine will be started this charge will be continue a long long time. And efficiency of our engine will be increase, rough
figure is given,

(12) PATENT APPLICATION PUBLICATION (21) Application No.4454/DELNP/2014 A
(19) INDIA
(54) Title of the invention : RAIL PAD WITH SEAL
(51) International classification :E01B9/68
(31) Priority Document No :11194344.5
(32) Priority Date :19/12/2011
(33) Name of priority country :EPO
Filing Date
:PCT/EP2012/076143
:19/12/2012
(87) International Publication No :WO 2013/092709
(61) Patent of Addition to Application
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)HF HOLDING SA
Address of Applicant :Rue du Commerce 13 B 1400 Nivelles
Belgium
1)AWI ABALO Bolom
2)LENS Michel
(57) Abstract :
An elongate rail pad (20) for providing continuous support of a rail has a top face (201) and a bottom face (201) wherein the top face
(201) is formed with a plurality of spaced apart longitudinal grooves (201). A longitudinal seal (23) against water and dirt is provided
on the top face (201) at each lateral end (204). The seal (23) comprises when considered from the lateral end a successive arrangement
of a first longitudinal lip (231) a first longitudinal channel (233) a second longitudinal lip (232) and a second longitudinal channel
(234) in that order wherein the first lip (231) projects above the top face (201) and the first and second channels (233 234) have a
cross sectional size large enough to allow in use water that oozes in to flow throughout the channel and the thickness (T2) of the
second lip (232) is smaller than the spacing (W) between the second channel (234) and an adjacent first groove.

(19) INDIA
(54) Title of the invention : MOBILE TERMINAL MANAGEMENT SERVER AND MOBILE TERMINAL MANAGEMENT
PROGRAM
(51) International classification :G06Q10/06
Filing Date
:PCT/JP2012/000635
:31/01/2012
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)IPS CO. LTD.
Address of Applicant :16th Fl. Tower B Grand Front Osaka 3
1 Ofuka cho Kita ku Osaka shi Osaka 5300011 Japan
1)AKITA Toshifumi
(57) Abstract :
The purpose of the present invention is to reduce the processing load required to retrieve data and to promptly output valid
information in a business system for providing mobile communication terminals with information related to business forms. A mobile
terminal management server (10) operating enterprise resource planning (ERP) provides in response to a request from a mobile
terminal (31) a project specification screen for specifying a business project (project) receives from the mobile terminal (31) a project
number indicating the specified business project refers to process flow data stored in a process flow table (PT) to retrieve each piece of
process data related to a plurality of business processes belonging to the business project indicated by the received project
number generates on the basis of each piece of retrieved process data project management information indicating the progress status of
the specified business project and provides the mobile terminal (31) with the project management information.

(19) INDIA
PROGRAM
(51) International classification :G06Q50/04,G06Q10/06
Filing Date
:PCT/JP2012/000638
:31/01/2012
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)IPS CO. LTD.
1)AKITA Toshifumi
(57) Abstract :
In a business system that provides information about a report to a mobile communication terminal, a processing load required for a
data search is reduced, and valid information is rapidly output. A mobile terminal management server 10 run by enterprise resource
planning (ERP) provides a production plan registration screen used to designate production plan registration request information for
making a production plan information registration request according to a request from a mobile terminal 31, receives and accepts the
designated production plan registration request information from the mobile terminal 31, specifies a configuration quantity of a
component of the production target product based on a scheduled production quantity of the production target product included in the
accepted production plan registration request information and production target product related information, and registers production
plan information including the configuration quantity of the specified component and the scheduled production quantity of the
production target product included in the production plan registration request information to process flow data stored in a process flow
data table PT.

(19) INDIA
PROGRAM
(51) International classification :G06Q50/04,G06Q10/06
Filing Date
:PCT/JP2012/000637
:31/01/2012
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)IPS CO. LTD.
1)AKITA Toshifumi
(57) Abstract :
planning (ERP) includes a process flow data table PT that stores process flow data including various kinds of data related to a process
flow including a plurality of business processes, and provides a condition designation screen used to designate a search condition
(manufacturing order number) according to a request from a mobile terminal 31, searches for process data including an item related
to production management of a product represented by an accepted search condition with reference to the process flow data table PT,
generates production management information matching the designated search condition based on the searched process data, and
provides the production management information to the mobile terminal 31.

(19) INDIA
(54) Title of the invention : ELECTRONIC DEVICE AND SYSTEM FOR CONTROLLING APPLICATIONS IMPLEMENTING
AT LEAST ONE PIEZOELECTRIC ELECTROSTRICTIVE OR MAGNETOSTRICTIVE TRANSDUCER
(51) International classification :B06B1/02
(31) Priority Document No :1161371
(33) Name of priority country :France
Filing Date
:PCT/FR2012/052823
:06/12/2012
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SINAPTEC
Address of Applicant :7 Avenue Pierre et Marie Curie
Synergie Park F 59260 Lezennes France
1)TIERCE Pascal
(57) Abstract :
The electronic device (1) for controlling comprises an electric power generator (10) suitable for supplying at least one
piezoelectric electrostrictive or magnetostrictive transducer (2) with a control signal (S) electronic controlling means (11) capable of
automatically controlling the electric power generator by using a control macro function (M) and an electronic memory (112) in which
the following are stored: a first family (A) of control functions comprising one or a plurality of different elementary control functions
(An) making it possible to adjust the amplitude of the control signal (S) a second family (T) of control functions comprising one or a
plurality of different elementary control functions (Tn) making it possible to adjust the duration of the control signal (S) a third family
(C) of control functions comprising a plurality of different elementary control functions (Cn) making it possible to adjust the control
signal (S) cycle at least said control macro function (M) which is made up of the assembly of at least three elementary control
functions chosen respectively from among the three families of control functions (A T C) recorded in the memory.

(19) INDIA
(54) Title of the invention : PROCESS OF SYNTHESIS OF MACROCYCLIC COPPER (II) COMPLEXES AND THEIR USE
THERE OF AS THERAPEUTIC AGENTS
(51) International classification :C07F5/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DR. RICHA KOTHARI
Address of Applicant :DEPARTMENT OF CHEMISTRY,
ITM UNIVERSITY GWALIOR NH 75 JHANSI ROAD
GWALIOR, M. P. 474001 INDIA
1)DR. RICHA KOTHARI
(57) Abstract :
A novel divalent macrocyclic copper (11) complexes are disclosed. The divalent copper species are directly produced by the template
method with a combination of carbohydrazone, tridentate thiosemicarbazide and copper (11) salts. The divalent copper (11)
complexes are characterized by elemental analysis, IR, HNMR, mass and electronic spectra. The magnetic moments and electronic
spectral studies suggested distorted octahedral geometry for all the complexes. The Cytotoxic activity against human Breast Cancer
Cell line MCF-7, antibacterial and antioxidant activities were evaluated for all synthesized compounds. The standard antibreast cancer
drug Tamoxifen was used as a positive control. The synthesized compounds were screened for their in vitro antibacterial activity using
Disc Diffusion method against two strains each of gram negative and gram positive bacteria. Tetracycline was used as positive
control. Antioxidant activity of all macrocyclic copper complexes was screened using the H202 scavenging assay. Alrcompounds
showed potent antioxidant activity in the range 80-90%.

(19) INDIA
PROGRAM
(51) International classification :G06Q10/06
Filing Date
:PCT/JP2012/000636
:31/01/2012
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)IPS CO. LTD.
1)AKITA Toshifumi
(57) Abstract :
planning (ERP) includes a process flow table PT that stores process flow data including various kinds of data related to a process flow
including a plurality of business processes, and receives and accepts aggregate description subject information representing an
aggregate description subject (a customer or a vendor) from a mobile terminal 31, searches for process data related to a plurality of
business processes for the aggregate description subject represented by the accepted aggregate description subject
information, generates aggregate description information (aggregate billing description information and aggregate payment
description information) representing an aggregate description for the designated aggregate description subject based on the
searched process data, and provides the generated aggregate description information to the mobile terminal 31.

(19) INDIA
(54) Title of the invention : SECURED SHARING OF LINK KEY BETWEEN TRUST CENTER AND JOINING NODE IN A
ZIGBEE NETWORK
(51) International classification :G06F15/16
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)HCL Technologies Limited
Address of Applicant :HCL Technologies Limited., A-8/9,
Sector 60, Noida 201 301, Uttar Pradesh India
1)Tammana Uma Sankar
(57) Abstract :
Disclosed herein are a method and system for secured link key transmission between a trust center and a joining node in a ZigBee
network. A binary file is shared between the trust center and the joining node. By processing data in the binary file, a first set of secret
numbers is generated. By processing the generated secret numbers further, a common secret key is calculated at the trust center and
the joining node. Further, using the common secret key, the link key transmission is encrypted.

(19) INDIA
PROGRAM
(51) International
classification
:G06F17/30,G06Q10/06,G06Q50/28
(33) Name of priority country:NA
(86) International
Application No
Filing Date
:PCT/JP2012/000639
:31/01/2012
(87) International Publication
No
:WO 2013/114447
(61) Patent of Addition to
Application Number
Filing Date
:NA
:NA
(62) Divisional to
Application Number
Filing Date
:NA
:NA
1)IPS CO. LTD.
1)AKITA Toshifumi
(57) Abstract :
planning (ERP) receives and accepts a designated search condition from the mobile terminal 31, searches for process data including an
item related to inventory management of a product represented by the accepted search condition with reference to process flow
data stored in a process flow data table PT, generates quantity data representing a quantity related to an inventory of a product based
on the searched process data, generates inventory-related data including the generated quantity data, generates inventory management
information icnluding inventory transition of the product represented by the designated search condition based on the inventory-
related data, and provides the generated inventory management information to the mobile terminal 31.

(19) INDIA
(54) Title of the invention : ANTIBACTERIAL GLAZE FOR CERAMIC TILES
(51) International classification :C04B33/04
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)Shreekant Somany
Address of Applicant :Somany Ceramics Limited, Kassar,
Haryana 124507, India
1)Shreekant Somany
(57) Abstract :
The present subject matter relates to a ceramic tiles wit11 antibacterial properties and more particularly to a method of malting
antibacterial tiles and a cotnposition of antibacterial glaze for ceratnic tiles to give antibacterial and antifungal effect. This invention
discloses a novel cornbination of antibacterial compounds which gives highly efficient long sustainable antibacterial properties at low
cost. The antibacterial glaze composition comprises of Clay, Soda I:eldspar, Titanium Dioxide (TiOz), grounded Zinc Oxide, Quartz,
Alumina, Spodumenc and Frit in specific proportions. This antibacterial coniposition is introduced and sprayed during the process of
manufacturing tiles before the firing stage.

(19) INDIA
(54) Title of the invention : TONGUE AND CHEEK MEAT PICKLED NUGGETS
(51) International classification :A23L1/27
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)BHAT ZUHAIB FAYAZ
Address of Applicant :SHER-E-KASHMIR UNIVERSITY
OF AGRICULTURAL SCIENCES AND TECHNOLOGY, R.S.
PURA, JAMMU, J & K, 181102 India
2)KUMAR SUNIL
1)BHAT ZUHAIB FAYAZ
2)KUMAR SUNIL
(57) Abstract :
This invention is for shelf.stabk -tongue and cheek meat pickled nuggets and to the method of preparation thereof. The product of the
present invention may be packed in sterilized glass jar or pouches or envelopes or other protective cartons which afford moisture-
barrier features.

(12) PATENT APPLICATION PUBLICATION (21) Application No.1830/MUM/2014 A
(19) INDIA
(54) Title of the invention : 3-D TITRABLE APNEA APPLIANCE
(51) International classification :A61F5/56,A61B5/048
Filing Date
:NA
:NA
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)BHAD WASUNDHARA ASHOK
Address of Applicant :20, PRAGATI NAGAR, BHAGWAN
NAGAR ROAD, NAGPUR-440 027, MAHARASHTRA, INDIA.
2)SHETE CHANDRAKANT SHIVKUMAR
1)BHAD WASUNDHARA ASHOK
2)SHETE CHANDRAKANT SHIVKUMAR
(57) Abstract :
This invention is related to a new oral appliance for the management of snoring and mild to moderate obstructive sleep apnea. In
obstructive sleep apnea there is absence of airflow despite persistent ventilatory efforts during sleep by the patient. Obstructive sleep
apnea is associated with cardiovascular consequences (hypertension, heart failure, and cardiac arrhythmias), neurocongnitive
consequences (excessive day time sleepiness and sleep fragmentation) and endocrine dysfunction (diabetes mellitus, thyroid disorder
etc.). In 1995 American Academy of Sleep Medicine has recommended oral appliance use for mild-to-moderate OSA and for patients
with severe OSA who are unable to tolerate CPAP or refuse treatment with CPAP. There are different oral appliances for the
management of snoring and obstructive sleep apnea but all are associated with one or more limitations aseither they are single piece
(upper & lower appliance is fused) or bulky or non titrable (unable to give maximum therapeutic effect at first visit by adjusting the
vertical and horizontal position of the mandible). These inadequacies cause failure in effective management of obstructive sleep apnea
and are also associated with adverse effects like temperomandibular disorder, tissue irritation, tooth pain and poor patient acceptance.
This invention describe a new oral appliance named as 3-D titrable oral appliance for the management of snoring and mild to
moderate obstructive sleep apnea. 3-D titrable oral appliance consists of wire framework, seven expansion screws and occlusal bite
blocks. Patient acceptance improves as this appliance is two piece appliance, lighter and titrable in all direction. With this appliance
clinician can increase the airway size in all dimensions at the first appointment by activation of the expansion screw to have the
maximum therapeutic effect.

(19) INDIA
(54) Title of the invention : IMPROVED ELECTRONIC SAFETY HELMET FOR MOTORCYCLIST
(51) International classification
:G08G1/16,
B60q1/00,
b62j6/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SNEHA ASHOK NAGARKAR
Address of Applicant :'SNEHANKIT', S NO 125,
AHERNAGAR, SWAMI VIVEKANAND PARK,
CHINCHWADGAON, PUNE-411033, MAHARASHTRA,
INDIA
1)PRANAV HEMANT GAJARE
2)SNEHA ASHOK NAGARKAR
(57) Abstract :
The improved electronic safety helmet is implemented by using microcontrollers, push switch,impact sensor, alcohol sensor, GPS &
GSM modem and connection to ignition system. An improved electronic helmet comprises of two modules: 1] Helmet module which
is placed in the helmet in a suitable place 2]Vehicle module which is placed below the tank of the vehicle The helmet module
comprises of: 1. A push switch in the inner part of helmet, to detect if the helmet is worn or not. 2. An alcohol sensor,which detects if
there is any alcohol consumption beyond danger level by rider. 3. An accelerometer to detect if accident takes place. 4. A solar panel
over a helmet for battery backup. 5. Microcontroller 1 to process the signals obtained from the above components and transmit to the
vehicle module through transmitter. The vehical module comprises of: 1. Microcontroller 2 to receive the transmitted signals from the
helmet module through receiver. 2. Connection to the ignition system. 3. A GPS modem to trace the geographical coordinates if an
accident takes place. 4. GSM modem to send the message of accident to the presaved contacts. The helmet and vehicle module are
connected wirelessly through transmitter and reciever. Until the helmet is worn and no alcohol consumption is detected the ignition
wont start, the transmitter sends the signal from the helmet module to the vehicle module. According to the signals received by the
receiver the vehicle module, turns the ignition on or off. Incase of accident the impact sensor detects it and the signal is sent to vehicle
module which immediately facilitaes the working of GPS and GSM to trace the location and send the message to relatives. Preferably,
said the solar panel should be of dome shape same as that of the shape of helmet. Alternatively, said some amount of elevation given
to the panel would also work. The solar panel is used for re-charging the helmet module battery.

(19) INDIA
(54) Title of the invention : AUTOMATIC SNEHANA SWEDANA EQUIPMENT
:A61H33/06,
A61H35/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MR. CHETAN D. CHAUDHARI
Address of Applicant :PLOT NO.9 NAMDEV APPT.
RAMANAND NAGAR ROAD, JALGAON, 425002
Maharashtra India
2)MISS. SHARVARI A.S. VIDWANS
1)MR. CHETAN D. CHAUDHARI
2)MISS. SHARVARI A.S. VIDWANS
(57) Abstract :
An automated Snehana (massage by oil) and Swedana (steam bath for particular duration) equipment for poorvakarma (treatment
procedures) comprising amongst others of massage table assembly having droni attached on the mainframe with caster wheels and
hood Assembly (steam chamber) consisting of hood rods having sliding wheels assembled on the guide channels attached to the hood
frame, fabric attached to rods forming a collapsible steam chamber over the Droni surface, a belt and pulley arrangement assembled to
the hood frame running through the guide channel & attached to the outer most rods, to open-close the hood, a swivel handle which
drives the pulley causing opening-closing of the hood, scissor lift mounted on the main frame coupled/connected with L brackets
causing up-down movement of head assembly, creating collapsible steam chamber, achieved by lead screw run by geared motor
mounted on main frame having a controller for regulating the speed and power supply of the motor, steam piping and its sealing liner
integrated at the bottom side of Droni longitudinally and having either ends connected to steam generator which is controlled by
inbuilt temperature control and timer, such that when massage is being performed, the patient lies down on the Droni, hood being
lowered and in closed position and when steam bath is being given, patient lies down on the Droni, steamer chamber is created, by the
forward movement of the hood rods through the guide channel in the direction of the head of Droni with the help of pulley
mechanism, so that the first rod is aligned with the head side of the Droni in the guide channel and rest of the hood rods placed
equidistant from each other, with steam flowing inside it for fixed period of time through the nozzle on the steam pipes and drainage
space which is formed by sealing liner and upper channel of the scissor lift where condensed steam is collected and can be drained
later and on set time being over, the steamer automatically shuts off the flow of steam, hood is opened manually with the help of
swivel handle, all the rods again accumulate in the hood container, water collected in the drainage space is wiped out, patient is
sponged, hood is lowered to its lower position, patient is asked to climb down the equipment.

(19) INDIA
(54) Title of the invention : SMART TRAVEL ALARM
:G01S19/34,
G08B21/02,
G08B23/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MRS. ABHILASHA DEVEN MISHRA
Address of Applicant :'ABHISHILP', 1, SUNDAR
RESIDENCY, NEAR KESHAV NAGRI, SHAHANOORWADI
PARISAR, AURANGABAD 431 005 Maharashtra India
2)MR. ANKIT JAIN
3)MRS. NEHA ANKIT JAIN
1)MRS. ABHILASHA DEVEN MISHRA
2)MR. ANKIT JAIN
3)MRS. NEHA ANKIT JAIN
(57) Abstract :
The SMART Travel Alarm is designed to provide services to customers based on the knowledge of their locations. Examples of these
services include Reached to destination alarm, email someone on reaching the destination, cereal-time traffic information, digital map
services which are delivered to mobile terminals according to users location to minimize data transmission, providing, dynamic
guidance services according to the users location and current traffic condition; requesting the nearest business or service (e.g., the
nearest restaurant.or cinema) and location based advertising (like Send e-coupons to all cars that are within two miles of the
hotel/Motel/Gas station etc). Android (from Google) and iOS from Apple are Linux based software stack for mobile devices which
includes an Operating System, SDK (software development kit), middleware and applications. Android provides a set of core
applications including an email client, SMS program, calendar, maps, browser, contacts, and others. All applications are written using
the Java programming language. In this patent application we propose the implementation of SMART Travel Alarm through Google
Web Services and Walk Score Transit APIs on Android and iOS Phones to give multiple services to the users based on their Location.

(19) INDIA
(54) Title of the invention : AN APPLICATION GENERATOR SYSTEM, METHOD, PLATFORM, AND ENGINE.
:G06Q10/06,
G06F17/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MR. MANOJ DHRUVARAJ KULKARNI
Address of Applicant :B-103, PRARTHANA STAR, SWAMI
NITYANAND ROAD, ANDHERI-EAST, MUMBAI-400 069
STATE OF MAHARASHTRA, INDIA.
1)MR. MANOJ DHRUVARAJ KULKARNI
(57) Abstract :
An application generator system comprises: at least an application creation and management component adapted to allow an
administrator to create applications; at least an application creation and management component comprises a modification component
adapted to allow an administrator to modify an application, on the fly; at least a security management component adapted to provide
privacy customizable security settings for access to an administrator and / or a user; at least a workflow generation component adapted
to allow an administrator to create/ manage workflows in relation to said created applications; at least a tagging component adapted to
allow for tagging of content in said created application; at least a structure modification component adapted to provide a structure
which is suitable for publication in pre-determined formats; and at least a deployment component adapted to allow deployment of
applications in accordance with predefined manners.

(19) INDIA
(54) Title of the invention : PAHAL-A TEETHING AND FEEDING DEVICE FOR OLDER INFANTS AND YOUNG CHILDREN
:A61J17/00,
A47G21/04
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)AGRAWAL MONA YOGESH
Address of Applicant :GOVERNMENT COLLEGE OF
PHAMACY, GOVERNAMENT POLYTECHNIC CAMPUS,
NEAR THIBA PALACE, RATNAGIRI-415612,
MAHARASHTRA, INDIA.
2)AGRAWAL YOGESH PURUSHOTTAM
1)AGRAWAL MONA YOGESH
2)AGRAWAL YOGESH PURUSHOTTAM
(57) Abstract :
The Baby teething and feeding device (Figure 1.): Is a new tool for feeding nutrients to 6 to 15 month old baby. The device is
approximately 06 inches long having teats on both ends. The entire surface of teat is covered with a raised bumpy pattern which will
massage the babys gums. The baby can hold either end or the middle of the stick in any manner to self-feed by sucking the teats. It is a
baby-friendly device that the baby can grasp easily and eliminate the frustration of baby in having food slide off or drop off before
they get it into their mouth as the back flow of feed is avoided by adding internal lid, thus offers hygienic mode of feeding. The
teething and feeding device is a safe tool to encourage a baby to self-feed.

(19) INDIA
(54) Title of the invention : FLEXIBLE FIREROOF JACKETING FOR ACTUATORS, VALVES, CABLE TRAYS & PIPELINES
:A62C2/06,
F16L57/04,
F16L59/16
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MR. BHIMRAO B. KADAM
Address of Applicant :W-220, S-BLOCK, MIDC, BHOSARI,
PUNE-411026, MAHARASHTRA, INDIA.
1)MR. BHIMRAO B. KADAM
(57) Abstract :
This invention mainly involves, Flexible fireproof jacketing system is extensively used in refineries sector for Oil & Gas industries,
Petrochemical Industries for the actuators, valves, cable trays & pipelines. This designed flexible fireproof jacketing system gives the
fire protection to the actuators, valves, cable trays & pipeline in the fire condition up to 30 minutes. We assure that the designed
flexible fireproof jacket gives you the protection to actuators , valves, cable trays & pipelines.

(19) INDIA
(54) Title of the invention : INTERNET BANKING FACILITY COUNTER IN RURAL AREA BANKING
(51) International classification :g06q20/00
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DR. DINESH DWARKADAS BHAKKAD
Address of Applicant :P.G. AND RESEARCH
DEPARTMENT OF COMMERCE, SPDM COLLEGE,
SHIRPUR DIST. DHULE 425405 MAHARASHTRA, INDIA.
1)DINESH DWARKADAS BHAKKAD
(57) Abstract :
The present invention discloses the facility counter provided for internet banking for rural population in rural area banking. The rural
population did not aware about internet banking benefits due to lack of education, internet facility, handling problems etc. The said
invention is an innovative approach in rural area banks and gives an extra facility to the customer. Here the Internet Banking Facility
Counter is open in a rural area bank with instructor, where customer can do the banking transaction by self through computers. The
instructor can guide the customer wherever necessary, aware about the Internet banking components, provide knowledge of computer,
extract benefits of internet banking and also give print out if required in minimum charges. The computer can be one or two in number
and customer can allow 15 to 20 minutes or bank decide the things considering the total number of customers.

(12) PATENT APPLICATION PUBLICATION (21) Application No.1099/CHE/2014 A
(19) INDIA
(54) Title of the invention : ENHANCEMENT OF VEHICLE CONTROL USING SECURITIZED GSM TECHNOLOGY
(51) International classification :h04w
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)M. VARUN KUMAR
Address of Applicant :NO.77, BIG STREET, KARNAMBUT
VILLAGE, KATPADI TK, VELLORE DT., PIN - 632 519 Tamil
Nadu India
1)M. VARUN KUMAR
2)MANICKYAM KARTHIK
3)M. VIJAYAKUMAR
4)C. BARATH KUMAR
5)S. RAJESH KUMAR
6)P. GANESH
(57) Abstract :
Under normal circumstances, a vehicle which runs through fuel (gas, petrol, and diesel) can be traced with the help of GPS
technology. Through GPS the navigation can be done for the drivers use and also we can trace the location details of the vehicle in
case of theft or hijack. Still now the technology was up to locating the vehicle through GPS but we cant stop the vehicle in the
particular location itself. In order to tackle such type of difficulties, we are providing a good solution by introducing a new device,
which runs through both GPS and GSM technology. By this device the person whose vehicle has been stolen can able to stop the
vehicle immediately by stopping the fuel flow to the engine and ignition using relays connected with the board by sending an SMS.
This device can be placed in two ways. One, it can be fitted during manufacturing of any vehicle and the second it can be fitted
additionally, as a security device to the vehicle. The GSM technology is enabled with the product at the time of purchasing itself. The
owner of the vehicle will be provided with a unique number. This unique number is embedded form of GSM which is attached with
the device. The owner of the vehicle can send the SMS denoting STOP as commanding message to the unique number. Once the GSM
device received the message, it starts the work as the fuel flow to the engine has been blocked by the relays attached with the board,
and the GPS of the system will send the location details to the owner. So that the vehicle owner can easily able to track the location
and also they can stop the car simply by sending the SMS. Once we get the vehicle, we can disable the working of relay by sending
SMS command as RELEASE to the GSM device. So that the working of the relay gets off also the blocks will be released. The
Vehicle will be ready for the users normal usage. The advantage is we dont want to touch any mechanical stuffs in the vehicle. All we
need to do is sending the SMS to the GSM device.

(12) PATENT APPLICATION PUBLICATION (21) Application No.119/CHENP/2014 A
(19) INDIA
(54) Title of the invention : METHOD AND APPARATUS FOR GENERATING A THREE DIMENSIONAL USER INTERFACE
(51) International classification :G06F 3/0488
(31) Priority Document No :201310151506.8
(33) Name of priority country :China
Filing Date
:PCT/CN2013/076459
:30/05/2013
(87) International Publication No :WO2013/189235 A1
Number
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)SPREADTRUM COMMUNICATIONS (SHANGHAI)
CO. LTD.
Address of Applicant :Building No.1 Spreadtrum Center Lane
2288 Zuchongzhi Road Zhangjiang High tech Park Pudong New
Area Shanghai 201203 China
1)XIA Lu
2)LIU Haipeng
(57) Abstract :
A method for providing a three dimensional user interface includes generating an image of a three dimensional scene according to a
set of camera parameters. The three dimensional scene includes a plurality of three dimensional graphical elements. The three
dimensional graphical elements are associated with a plurality of applications stored on a computing device. The method further
includes receiving a user input; adjusting the camera parameters according to the user input; and updating the image of the three
dimensional scene according to the adjusted camera parameters.

(19) INDIA
(54) Title of the invention : WATER WHEEL AVATAR
(51) International classification :fo3b
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)KRISHNAN THAMPI
Address of Applicant :MANAGING DIRECTOR, AVATAR
RENEWABLES PVT. LTD., 111/29B, NORTH
KALAMASSERY, COCHIN - 683 104 Kerala India
1)KRISHNAN THAMPI
(57) Abstract :
The invention relates to a water wheel based apparatus for harnessing maximum kinetic energy of water currents from oceans, river
and streams to be converted to electrical energy or drive other mechanical devices like pump, mill etc, through mechanical shaft
rotation. The apparatus is typically designed to work in water submerged conditions and operable in either uni-directional or bi-
directional water flow condition. The wedge and jaw shaped flipping paddles positioned in the velocity boosting duct, are designed by
considering the fact that any velocity enhancement to the paddle wheel will result in a significant increase in the shaft power, as a cube
function of the velocity (Power = 0.5 x p x A x V3 watts, where p= density of water in kg/m3, A= area of paddle in m2, V=velocity of
water at the paddle in m/s). The water wheel avatar apparatus comprises of a vertical shaft carrying the multi layered wedge and jaw
shaped flipping paddles at diagonally opposite directions and equidistant from one another. The flipping wedge and jaw shaped
paddles comprises upper and lower plates attached by a hinge at one end. These are designed to open up like a bucket with flow
hitting the un-hinged side on the paddle, to an angle of 60-80 deg. The force of water captured in the bucket cavity of paddle push
around the shaft, rotating the paddle to face against water flow. As the hinge side face against the water flow, upper and lower plates
close to the minimum angle and take a wedge shape, with minimum restriction against water. The difference in force between power
side and free side keep the shaft rotating, capturing and converting kinetic energy of flowing water to mechanical shaft power.
Opening angle between the upper and lower plate of the flipping paddles can be optimized by adjustable stoppers. For the velocity
boosting duct, angle of incidence and inlet/outlet area ratio can be varied for performance optmisation under different flow conditions.
The design is scalable with multi-layer paddles in a staggered manner, giving smooth shaft power without pulsations.

(19) INDIA
(54) Title of the invention : A NOVEL ANTIBACTERIAL COMPOUND FOR MULTI&NBSP;DRUG RESISTANT EXTENDED
SPECTRUN BETALACTAMASE PRODUCING BACTERIAL PATHOGEN CAUSING RESPIRATORY TRACT INFECTION
FROM MARINE ALGAE ULVA LACTUCA
(51) International classification :a61k
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)DR. K. RAJA PANDIYAN
Address of Applicant :ASSOCIATE PROFESSOR,
DEPARTMENT OF MICROBIOLOGY CENTRE FOR
RESEARCH, SRIMAD ANDAVAN COLLEGE,
TIRUVANAIKOVIL, TRICHIRAPPALLI Tamil Nadu India
2)DR. ALI A ALSHATWI
3)DR. S. SHANTHI
4)DR. V.S. PERIASAMY
5)DR. A.M. MURUGAN
6)DR. ABDULLAH ABDULAZIZ A. ALARFAJ
1)DR. K. RAJA PANDIYAN
2)DR. ALI A ALSHATWI
3)DR. S. SHANTHI
4)DR. V.S. PERIASAMY
5)DR. A.M. MURUGAN
6)DR. ABDULLAH ABDULAZIZ A. ALARFAJ
(57) Abstract :
The invention relates to a novel purified compound represented by molecular formula - C18H15NO4 and Molecular Weight - 309.316
with molecular composition of C(69.89%) H(4.89%) N(4.53%) 0(20.69%) obtained from Viva lactuca marine algae. The present
invention further relates to the marine algae Viva lactuca which was subjected to chemical extraction using ethyl acetate and
purification of bioactive novel compound done by different column purification methods which yields greenish yellow pure
compound. The molecular structure of current novel compound structure was derived by spectroscopic methods viz. Ultra violet
spectroscopy ( UV), Fourier Transmission Infra Red Spectroscopy (FTIR),High resolution Mass spectrum (HRMS), Nuclear Magnetic
resonance (NMR) analysis and also its 3Dimentional structure were predicted. The compound has following physicochemical
character such as Molar Refractivity - 83.65 ± 0.4 cm3, Molar Volume -218.1 ± 5.0 cm3, Parachor - 616.7 ± 6.0 cm3, Index of
Refraction - 1.692 ±0.03, Surface Tension -63.8 ±5.0 dyne/cm, Density - 1.41 ± 0.1 g/cm3, Polarizability - 33.16 ± 0.5 10-24cm3,
Ring Double Bond Equivalents (RDBE) or Double Bond Equivalents (DBE) - 12, Monoisotopic Mass - 309.100108 Da and Nominal
Mass - 309 Da. This novel bio active compound is named as 3-2-hydroxyphenyI-7-methyl 10-dihydropyrano benzoxazin-4-one based
on molecular composition. The bio active compound showed excellent wide range of antimicrobial activity against multi drug
resistance bacterial pathogens causing Respiratory tract infections. Also it has broad spectrum activity against Extended spectrum Beta
latamase enzyme producers such as E.coli, P. mirabilis, K. pneumonia, P.aeruginosa and Methiciline Resistant Staphylococcus aureus.
The targets of present bioactive compounds are Glycerol kinase which is bacterial enzyme involved in glucose metabolisms of
pathogenic bacteria and Extended spectrum beta lactamase enzyme producer which is responsible for the denature the wide range of
Beta Lactam Drugs. Our novel bioactive compound is binding with Glycerol kinase protein - TYR amino acid at 135th position and
ARG amino acid at 83 position which leads to interfering the Glucose metabolisms of bacteria. Similarly in Extended spectrum
Betalactamase protein LYS at 315th position and ARG at 145th position which leads to destruction of Multi drug resistant Extended
spectrum Betalactamase producing bacterial pathogens. Hence the present compound proved that wide spectrum of bactericidal
Activity.

(19) INDIA
(54) Title of the invention : DRIVER TRAINING, RATING AND ACTION MODES
(51) International classification :g08g
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)HCL Technologies Limited
Address of Applicant :HCL Technologies Ltd AMB 3.64-
66,South Phase, II Main road, Ambattur Industrial estate,
Chennai-58 Tamil Nadu India
1)Venubabu Katragadda
2)Vijay Tiruchengode Parthasarathy
3)Shyam Thangaraju
4)Siva Sakthivel S
(57) Abstract :
This invention relates to driver technology, and more particularly to improving road safety by improving driver training, providing a
rating system and providing a warning system for drivers. The principal object of this invention is to propose a method and system for
testing a person for a driving license. Another object of the invention is to propose a method and system for monitoring capabilities of
a driver, when the driver is driving on the road. A further object of the invention is to propose a method and system for
communicating the capabilities of a driver based on the current traffic scenario to other drivers.

(19) INDIA
(54) Title of the invention : SYSTEM AND METHOD FOR MANAGING OPERATIONS OF A PROJECT
(51) International classification :g06f
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)WIPRO LIMITED
Address of Applicant :Doddakannelli, Sarjapur Road,
Bangalore 560035, Karnataka, India.
1)ANURAG SRIVASTAVA
2)TEKKETHALAKAL KURIEN
(57) Abstract :
Systems and methods for managing operations in a project management model are described herein. In one example, the method
comprises receiving a project specification of a project from a client, and generating a resource allocation model for fulfilling the
project specification, wherein the resource allocation model is indicative of at least one of an hierarchical arrangement of a plurality of
resource entities assigned to the project or the competency index of one or more of the plurality of resource entities assigned to the
project. The method further comprises identifying phases of the project which are capable of being automated by analyzing the project
specification using an automation criterion, and generating a workbench for at least one resource entity, from amongst the plurality of
resource entities, based on the resource allocation model and the identified phases of the project.

(19) INDIA
(54) Title of the invention : A SYSTEM AND METHOD FOR DETERMINING LIFE CYCLE INTEGRITY OF KNOWLEDGE
ARTIFACTS
(51) International classification :g06q
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)WIPRO LIMITED
1)SREENIVAS KUNAPULI
2)ANURADHA PENTAREDDY
(57) Abstract :
The present disclosure relates to a computer-implemented method and a system for determining lifecycle integrity of one or more
knowledge artifacts. In one embodiment, life cycle integrity is determined by determining one or more parameters such as technology
governance index, process governance index, corporate governance index, future change governance index of the knowledge artifacts.
By determining the life cycle integrity of the knowledge artifacts, the system is able to continuously monitor and record the changes
happening during the life cycle of the knowledge artifacts and also implements definite controls, checks and balances in the
knowledge management. Further, the Knowledge management system is capable of adapting itself to the future changes or needs and
also ensuring that the processes are being followed in line with standard protocols followed on the Knowledge trade.

(19) INDIA
(54) Title of the invention : VARIABLE HEIGHT ONSHORE WIND TURBINE AND A METHOD FOR OPERATING THE SAME
(51) International classification :f03d
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)ANIRUDH SINGH SHEKHAWAT
Address of Applicant :B.TECH.,SELECT, VIT
UNIVERSITY, CHENNAI - 600 127 Tamil Nadu India
1)ANIRUDH SINGH SHEKHAWAT
2)PIYUSH BHAGDIKAR
3)SHUBHAM AGRAWAL
(57) Abstract :
A wind turbine comprising of rotor blades, hub, a nacelle equipped with a wind speed sensor vane and hydraulic lift. The turbine is
capable of changing its operating height depending on the wind speed, in order to increase the power output. The mechanism also
safeguards the turbine from high wind speeds beyond the cut out speed. The power output of a wind turbine generator varies with the
cube of wind ; therefore even a slight variation in wind velocity will result in substantial increase in the average power generation of
the wind turbine generator.

(19) INDIA
(54) Title of the invention : SYSTEM AND METHOD FOR OPTIMIZING PROJECT OPERATIONS AND ASSOCIATED
PROCESSES OF AN ORGANIZATION
(51) International classification :g06q
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)WIPRO LIMITED
1)ANURAG SRIVASTAVA
2)TEKKETHALAKAL KURIEN
(57) Abstract :
Systems and methods for managing operations in a project management model are described herein. In one example, the method
comprises receiving a project specification of a project from a client and generating a resource allocation model for fulfilling the
project specification. The method further comprises identifying processes, associated with at least one of the project management
model or the project delivery model, which have an efficiency/ productivity index less than a pre-defined efficiency/ productivity
threshold and amending the identified processes based on at least one of lean techniques or six sigma techniques, wherein the
amendment enhances the efficiency/ productivity index to one of equal or exceed the pre-defined efficiency/ productivity threshold.
Thereafter, the method comprises modifying portions of a workbench for at least one resource entity, from amongst the plurality of
resource entities, based on the resource allocation model and the amended processes.

(19) INDIA
(54) Title of the invention : LOW COST TEACHING APARATUS OF MODEL HUMAN ARM
(51) International classification :g09b
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MR. CHEEKURTHI SURESH BABU
Address of Applicant :D.NO. 12-285, GANDHI NAGAR,
VUYYURU - 521 165, KRISHNA DISTRICT Andhra Pradesh
India
1)MR. CHEEKURTHI SURESH BABU
(57) Abstract :
A model teaching device of a human arm comprising of the Humerus, the Ulna, the Radius and Distal hand, Biceps, Tendon and
Ligaments, the Humerus attached to a wooden stand on which the model arm is attached; the force being exerted on the Tendon by
means of a push pedal system where the Tendon is connected to a knob controlling the push pedal system by means of an invisible
nylon wire and a sliding wheel, in such a manner that when the push pedal is in the down position, it pulls the inelastic nylon rope
representing the Tendon which in turn transfers the force onto the arm, resulting in the arm being lifted, working the Biceps, the
ligaments, the Radius, the Ulna and the Distal hand.

(19) INDIA
(54) Title of the invention : PATIENT ATTENDING SYSTEM
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)J. GOPINATH
Address of Applicant :NO. 10/24, 1ST FLOOR,
RAMANATHAN STREET, KILPAUK, CHENNAI - 600 010
Tamil Nadu India
1)J. GOPINATH
(57) Abstract :
The present invention relates to patient care and communication system which expands the operational capability of a patient/nurse
call system to facilitate locating, prioritizing and responding to all types of patients requirements in a systematic way.

(19) INDIA
(54) Title of the invention : SYSTEM AND METHOD FOR OPTIMIZING STORAGE OF MULTI-DIMENSIONAL DATA IN
DATA STORAGE
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)WIPRO LIMITED
1)ABHISHEK GUNJAN
(57) Abstract :
The present disclosure relate to method and optimization system for optimizing storage of multi-dimensional data in data storage. The
method comprises analyzing a plurality of queries received over period of time from one or more client machines. Then, a query
pattern is determined from plurality of queries. Based on query pattern dimensionality of data is identified for determining data storage
strategy. The dimensionality is characterized into 11 dimensions comprising 4 standard level dimensions and 7 higher level
dimensions. A highest dimension out of 7 higher dimensions is parallel data storage dimension. Based on storage strategy, at least one
of data and columns of a table is segmented in data storage. Next, data is stored in remote data storage when data is an element of last
higher level dimension. Then, higher level dimensions are fragmented into one or more smaller level dimensions when data is element
greater than 11dimensions.

(19) INDIA
(54) Title of the invention : AN IMPLEMENTING DEVICE AND METHOD FOR WIRELESS VISIBLE LIGHT
COMMUNIATION
(51) International classification :h01l
Filing Date
:NA
:NA
Filing Date
:NA
:NA
Filing Date
:NA
:NA
1)MR. KRISHNA CHAITANYA PODURU
Address of Applicant :PLOT NO: 40, 54-20-10, OPP SBH,
MAHAJAN DENTAL CLINIC, GURUNANAK COLONY
ROAD, VIJAYAWADA - 520 008 Andhra Pradesh India
2)MR. K. VENKATA SUJIT
3)MR. SAIROOP DASARAJU
4)MR. ABHINAY DWADASI
5)MR. LAKSHMI VENKATESH RASINENI
1)MR. KRISHNA CHAITANYA PODURU
2)MR. K. VENKATA SUJIT
3)MR. SAIROOP DASARAJU
4)MR. ABHINAY DWADASI
5)MR. LAKSHMI VENKATESH RASINENI
(57) Abstract :
Recent developments in solid state light emitting diodes and many other fast switching light emitting sources led to new phase of
communication methodology and technology. In the light of tremendous efficiency showcased by these fast switching light sources,
the present invention discloses a new method of communication using three monochromatic LEDs which would improve the bit rate
of the traditional visible light communication system by two times and the device implementing the same.

Published indian patent and design registration information august 8th, 2014

Published indian patent and design registration information august 8th, 2014

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to Published indian patent and design registration information august 8th, 2014

Similar to Published indian patent and design registration information august 8th, 2014 (20)

More from InvnTree IP Services Pvt. Ltd.

More from InvnTree IP Services Pvt. Ltd. (20)

Recently uploaded

Recently uploaded (20)

Published indian patent and design registration information august 8th, 2014