Hammer crusher is applicable for medium hard and brittle materials, such as limestone and coal.

1. Tel: +86-371-67833161 / 67833171
E-mail: sales@hxjq.com sinohxjq@hxjq.com
Yahoo: hongxingmachinery@yahoo.com
Website: http://www.hxjqchina.com
Application
The hammer crusher also named hammer mill. Hammer Crusher is mainly used for crushing
medium-hard or brittle materials with hardness not more than 300Mpa and 15% moisture such as barite,
limestone, terrazzo, silica sand stone, coal, coke, gypsum, aluminum sulfate, slag, salt, chalk, blocks,
cement, brick, tile, etc. It has the features of simple structure, big crushing ratio, high production
efficiency, uniform particle size, etc. The hammer crusher is one of the main equipment for intermediate
and fine crushing the brittle materials with less than intermediate such as limestone coal and other used in
metallurgy, building material, chemical and water - power industry, with a feature of big crushing ratio
and even product graininess. And hammer crusher can crush materials with different sizes into equal
particle, which favors the next procedure. The PC hammer crusher(hammer mill) were developed for both
dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic,
construction material, road building, and petroleum & chemical industries. This crusher machine can be
also used for crushing chips and paper with fiber structure and strong elasticity and ductility, or recycling
asbestos fiber by crushing wastes of asbestos cement, etc. Gap between the gratings are adjustable to
China Mining Machinery Production and Export Base
Address: No.8 Tanxiang Road, Zhengzhou, Henan, China

2. Tel: +86-371-67833161 / 67833171
E-mail: sales@hxjq.com sinohxjq@hxjq.com
Yahoo: hongxingmachinery@yahoo.com
Website: http://www.hxjqchina.com
change grain size of the discharge.
Henan Hongxing is a high-tech enterprise, which specializes in researching and producing wear resistant
materials and crushing engineering products. With a complete line of crushing, grinding and screening
equipments, we are confident we can provide you the most professional service for what you need.
Working Principle of hammer crusher
The main working part of hammer crusher is rotors with hammer. The rotors consist of main shaft, disk,
pin shaft and hammers. The motor drives the rotors to rotate quickly in the crushing cavity. Raw materials
enter the crusher through the feed opening and are stricken, impacted, cut and ground by the high-speed
hammer to small size. There is a screening plate under the rotor, so that materials with size smaller than
the screen mesh will be screened out and others are left to be further hammered and ground until reach the
standard size. The size of the final product can be adjusted by changing the screening plate. The gap
between the rotors and the screening plate can also be adjusted according to different requirement.
Not only can the hammer crusher be applied in crushing production line and sand making production line,
but it also replaces the cone crusher in beneficiation production line. Due to their superior quality and
China Mining Machinery Production and Export Base
Address: No.8 Tanxiang Road, Zhengzhou, Henan, China

3. Tel: +86-371-67833161 / 67833171
E-mail: sales@hxjq.com sinohxjq@hxjq.com
Yahoo: hongxingmachinery@yahoo.com
Website: http://www.hxjqchina.com
dependable service, Henan Hongxing products have been exported in large quantities to over 75 countries
and regions such as Mongolia, Vietnam, France, Germany, Malaysia, Turkey, Middle East, Africa, etc.
Hammer Crusher Technical Parameters
Dimensions
Feeding Size
Discharging size
Capacity
Motor power
Total weight
(mm)
(mm)
(m³/h)
(kw)
(t)
PCΦ400×300
≤200
≤25
5-10
11
0.8
900×670×860
PCΦ600×400
≤250
≤30
10-22
22
2.26
1200×1050×1200
PCΦ800×600
≤250
≤35
18-40
55
4.8
1310×1180×1310
PCΦ1000×800
≤350
≤35
25-50
75
5.9
1600×1390×1575
PCΦ1000×1000
≤350
≤35
30-55
90
8
1800×1590×1775
PCΦ1250×1250
≤350
≤35
35-65
132
14
2060×1600×1890
PCΦ1400×1400
≤350
≤35
50-100
280
32
2365×1870×2220
PCΦ1600×1600
≤350
≤35
100-150
480
37.5
3050×2850×2800
Specifications
China Mining Machinery Production and Export Base
(L×W×H)
(mm)
Address: No.8 Tanxiang Road, Zhengzhou, Henan, China