1. Pellet Maker – Be Careful in Buying a Pellet Maker
___________________________________________________________________________________
By Kani Laon - http://pelletmaker.net/
It is good to be very careful when buying a pellet maker for your personal use. Remember that the final
buying decision you make will impact hugely on how you will succeed or fail in making feed pellets for
your animals. Some people tend to assume many things when making purchase but you have no reason
to go by mere assumptions that will only cause you frustrations. For your sake, Pellet Maker the
following information will touch on the things you should be careful about during purchase as well as
usage of the pellet mill for maximum benefits.
KOTEB 350 50 Briquette Machine 300x256 Pellet Maker Be Careful in Buying a Pellet MakerAlways look
out for faults that can be too costly if not detected on time. Some of these faults can come in the form
of cracks in the shafts and broken shafts as well as rollers. Most of these issues come up due to poor

2. structures of the mill so you have to be very choosy on the manufacturer you engage. Some of the
companies, especially in China, are known to manufacture very cheap but poor quality mills. Try as
much as you can to avoid buying from companies with a poor record of selling unreliable mills. If
possible, make your own assessment of the mills rather than depending on what other peoples say. That
is the only way of making a fair judgment on whether a company suits satisfying your needs.
ine make your sawdust into 300x300 Pellet Maker Be Careful in Buying a Pellet MakerAnother thing that
you have to consider during purchase of a mill is its powering capacity. Some mills are known to
breakdown in the process of compressing pellets once their power levels go down. The best mill should
have a strong power bank and a backup incase things go wrong.
It would not augur well if the machine keeps on interrupting the compressing process through
unwarranted constant power failure. If there is no enough power, the motor that runs the mill will keep
on stalling which can be very embarrassing. You can read through customer reviews on the mill you are
about to buy and pay more attention to its power rating. Make sure you go for the one with a higher
rating from many buyers.Once you have bought the pellet maker, it is time to enjoy its services but you
must equally be cautious on how you use it. This will cushion you from suffering injuries or even

3. damaging the machine once it falls off. There is the earth wire that must be well in place before it is
plugged in otherwise you might suffer an electric shock. You should not start operating the machine if
the earth wire is not properly grounded. Once it is operational, avoid touching any naked wire or
electrical parts that can easily cause an electric shock.
If the machine gets damaged, involve a qualified and well trained expert for repairs. Do not touch or
open it up if you are not qualified or entrust it with a rogue engineer. There are specific requirements
that should be met in case of repairs which you will have the obligation to follow.
So… What’s Next ?
To learn more about Pellet Maker, Click Here: http://pelletmaker.net/