This document provides instructions for removing and replacing front wheel axles on JCB machines. It includes warnings about safely supporting the machine before working underneath. The section describes removing the driveshaft, steering linkages, brake lines, and mounting bolts. Replacement involves reversing these steps and reconnecting lines, bleeding the brakes and steering, and checking torque settings. Specification tables list the component types and torque values.
John deere 790 compact utility tractor service repair manualfhjsjekdmme
The diesel engine uses a mechanical fuel transfer pump to draw fuel from the tank and send it through the fuel filter and then to the injection pump. The injection pump meters the fuel and delivers it at high pressure to the injection nozzles. Excess fuel is returned to the tank. Air enters through the air filter and intake manifold. The cooling system uses a coolant pump to circulate coolant through the engine block and radiator to cool it.
John deere 770 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The manual instructs technicians on repair procedures, specifications, safety practices, and diagnosing routine failures. It is intended to be an on-the-job guide for experienced service technicians.
John deere 756 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 655, 755, 855, 955, 756 and 856 compact utility tractors. It contains repair and diagnostic sections divided into various systems like the diesel engine, fuel system, alternator, power train, steering, brakes, hydraulics and other components. Safety precautions and specifications are provided at the beginning along with information on recommended fuels, lubricants, coolants and storage procedures. Component locations like the product serial number and engine serial number are also included.
John deere 755 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides specifications and repair/removal instructions for John Deere compact utility tractors models 655, 755, 855, 955, 756 and 856. It includes sections on the diesel engine, fuel and air systems, alternator, power train, steering/brakes, hydraulics, and other components. The document provides overview information, safety messages, lubrication recommendations, component locations, and step-by-step repair guides to assist technicians in servicing the machines.
John deere 670 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The document provides specifications, repair/removal instructions, and diagnostic information to assist technicians in servicing these tractor models. Safety messages are included throughout and components are organized by system for easy reference.
John deere 667 quick trak mower service repair manualfhjsjekdmme
This document provides specifications for the John Deere QuickTrak 647 utility vehicle. It includes specifications for the Kawasaki gasoline engine, fuel system, electrical system, battery, power train, attachment drive, steering, brakes, attachment lift, tires, dimensions, weight, and mower decks. Torque specifications are also provided for metric and inch fasteners. Recommendations are given for hydraulic fittings, O-rings, gasoline, oils, lubricants, and identifying serial numbers.
John deere 657 quick trak mower service repair manualfhjsjekdmme
This document provides specifications for the John Deere QuickTrak 647 utility vehicle. It includes specifications for the Kawasaki gasoline engine, fuel system, electrical system, battery, power train, attachment drive, steering, brakes, attachment lift, tires, dimensions, weight, and mower decks. It also includes tables listing torque specifications for fasteners and recommendations for hydraulic fittings and O-rings. Additional sections provide information on gasoline and engine oil requirements as well as lubricant types and storage.
John deere 655 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides specifications and repair/removal instructions for John Deere compact utility tractors models 655, 755, 855, 955, 756 and 856. It includes sections on the diesel engine, fuel and air systems, alternator, power train, steering/brakes, hydraulics, and other components. The document provides overview information, safety notices, lubrication specifications, serial number locations, and step-by-step procedures for repairs, removals and installations. Technicians can use this manual as a guide for diagnosis, testing, repair and maintenance of these tractor models.
John deere 790 compact utility tractor service repair manualfhjsjekdmme
The diesel engine uses a mechanical fuel transfer pump to draw fuel from the tank and send it through the fuel filter and then to the injection pump. The injection pump meters the fuel and delivers it at high pressure to the injection nozzles. Excess fuel is returned to the tank. Air enters through the air filter and intake manifold. The cooling system uses a coolant pump to circulate coolant through the engine block and radiator to cool it.
John deere 770 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The manual instructs technicians on repair procedures, specifications, safety practices, and diagnosing routine failures. It is intended to be an on-the-job guide for experienced service technicians.
John deere 756 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 655, 755, 855, 955, 756 and 856 compact utility tractors. It contains repair and diagnostic sections divided into various systems like the diesel engine, fuel system, alternator, power train, steering, brakes, hydraulics and other components. Safety precautions and specifications are provided at the beginning along with information on recommended fuels, lubricants, coolants and storage procedures. Component locations like the product serial number and engine serial number are also included.
John deere 755 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides specifications and repair/removal instructions for John Deere compact utility tractors models 655, 755, 855, 955, 756 and 856. It includes sections on the diesel engine, fuel and air systems, alternator, power train, steering/brakes, hydraulics, and other components. The document provides overview information, safety messages, lubrication recommendations, component locations, and step-by-step repair guides to assist technicians in servicing the machines.
John deere 670 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides service information for John Deere 670, 770, 790, 870, 970, and 1070 compact utility tractors. It contains sections on general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and operation/testing. The document provides specifications, repair/removal instructions, and diagnostic information to assist technicians in servicing these tractor models. Safety messages are included throughout and components are organized by system for easy reference.
John deere 667 quick trak mower service repair manualfhjsjekdmme
This document provides specifications for the John Deere QuickTrak 647 utility vehicle. It includes specifications for the Kawasaki gasoline engine, fuel system, electrical system, battery, power train, attachment drive, steering, brakes, attachment lift, tires, dimensions, weight, and mower decks. Torque specifications are also provided for metric and inch fasteners. Recommendations are given for hydraulic fittings, O-rings, gasoline, oils, lubricants, and identifying serial numbers.
John deere 657 quick trak mower service repair manualfhjsjekdmme
This document provides specifications for the John Deere QuickTrak 647 utility vehicle. It includes specifications for the Kawasaki gasoline engine, fuel system, electrical system, battery, power train, attachment drive, steering, brakes, attachment lift, tires, dimensions, weight, and mower decks. It also includes tables listing torque specifications for fasteners and recommendations for hydraulic fittings and O-rings. Additional sections provide information on gasoline and engine oil requirements as well as lubricant types and storage.
John deere 655 compact utility tractor service repair manualfhjsjekdmme
This technical manual provides specifications and repair/removal instructions for John Deere compact utility tractors models 655, 755, 855, 955, 756 and 856. It includes sections on the diesel engine, fuel and air systems, alternator, power train, steering/brakes, hydraulics, and other components. The document provides overview information, safety notices, lubrication specifications, serial number locations, and step-by-step procedures for repairs, removals and installations. Technicians can use this manual as a guide for diagnosis, testing, repair and maintenance of these tractor models.
John deere 647 quick trak mower service repair manualfhjsjekdmme
This document provides specifications for the John Deere QuickTrak 647 utility vehicle. It includes specifications for the Kawasaki gasoline engine, fuel system, electrical system, battery, power train, attachment drive, steering, brakes, attachment lift, tires, dimensions, weight, and mower decks. Torque specifications are also provided for metric and inch fasteners. Recommendations are given for hydraulic fittings, O-rings, gasoline, oils, lubricants, and identifying serial numbers.
John deere 550 cs chainsaws service repair manualfhjsjekdmme
This technical manual provides specifications and safety information for John Deere 200CS, 230CS, 300CS, and 550CS chainsaws. It includes sections on general specifications, torque values, gasoline and oil recommendations, product identification numbers, and safety practices. The manual is intended as a reference for experienced technicians and contains detailed information organized by topic.
John deere 365, 375, 380, 380 a, & 390 front blades service repair manualfhjsjekdmme
This technical manual provides specifications and information for John Deere backhoes, loaders, blades, tillers and hydraulic dump units. It includes specifications on hydraulic systems, lift and drop rates, cycle times and dimensions. It also provides service recommendations for O-ring boss fittings and flat face O-ring seal fittings, including torque specifications for proper installation.
John deere 300 cs chainsaws service repair manualfhjsjekdmme
This technical manual provides specifications and safety information for John Deere 200CS, 230CS, 300CS, and 550CS chainsaws. It includes sections on general specifications, torque values, gasoline and oil recommendations, product identification numbers, and safety practices. The manual is intended as a reference for experienced technicians and contains detailed information organized by topic.
Clark op15 x forklift service repair manualfhjsjekdmme
This document provides service and repair information for an OP15X battery-powered forklift truck. It includes sections on safety, components, maintenance procedures, troubleshooting, and repair/rebuild instructions for systems such as the chassis, operator platform, battery compartment, controls, motors, transmission, brakes, wheels, steering, and hydraulics. Technical specifications and diagrams are provided for identification and repair of parts.
Clark np20 forklift service repair manualfhjsjekdmme
This service manual provides information for mechanics to maintain and service Clark electric trucks. It contains sections on the frame, controls, transmission, electrical system, hydraulic system, tires, shielding, jacking/hoisting, mast, specifications, and troubleshooting. It warns that the truck should be checked for damage when received and that only qualified mechanics should perform repairs. It provides operating rules for drivers, including checking the truck before operation and handling loads safely.
Clark np15 forklift service repair manualfhjsjekdmme
This service manual provides information for mechanics to maintain and service Clark electric trucks. It contains sections on the frame, controls, transmission, electrical system, hydraulic system, tires, shielding, jacking, mast, specifications, and troubleshooting. The manual instructs mechanics to examine trucks for damage upon arrival and check fluid levels and brakes before operation. It provides warnings for safe operation and outlines rules for qualified operators.
Clark hwx forklift service repair manualfhjsjekdmme
This document provides information about periodic maintenance of HWX/PWX trucks, including:
1. A maintenance schedule listing tasks and suggested intervals for normal, severe, and extreme operating conditions.
2. Details of a planned maintenance program involving inspections, tests, and recording truck conditions on a checklist.
3. A sample planned maintenance report form for documenting inspections.
Clark hwd 36 forklift service repair manualfhjsjekdmme
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark hwd 30 40 se service repair manualfhjsjekdmme
This document provides maintenance schedules and procedures for Clark trucks. It discusses periodic service and planned maintenance, which includes basic inspections, adjustments, and lubrications performed on a scheduled basis, usually every 50-250 hours of operation. The document provides maintenance schedules that specify all maintenance tasks that should be performed periodically, including suggested intervals. It also contains sections covering planned maintenance procedures and inspections to be performed during scheduled maintenance.
Clark hwd 30 forklift service repair manualfhjsjekdmme
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark hwd 25 forklift service repair manualfhjsjekdmme
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark gpx 55 forklift service repair manualfhjsjekdmme
This document is a service manual for Clark GPX/DPX 30/55 trucks. It contains copyrighted material intended only for Clark dealers. The manual includes an index, table of contents, and sections covering safety, engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications. Users are instructed to only allow trained technicians to perform maintenance following the procedures in the manual.
Clark gpx 30 forklift service repair manualfhjsjekdmme
The document provides instructions for removing and installing a transmission on a Clark forklift. It describes disconnecting all transmission connections, draining the oil, removing mounting bolts, and using lifting equipment to lower the transmission from the forklift while leaving the engine in place. Reinstallation involves mounting the torque converter to the transmission, inserting the transmission under the lifted forklift, and reconnecting all components. The process is described in 21 steps for removal and 8 steps for installation.
Clark gps standard forklift service repair manualfhjsjekdmme
- This document is the service manual for Clark lift trucks and provides information on maintenance, repair, and safety procedures.
- It instructs technicians to take safety precautions like raising the wheels, blocking components, and relieving pressure before working.
- The manual emphasizes using proper maintenance techniques and genuine Clark parts to ensure safe operation and compliance with regulations.
Clark gph 75 forklift service repair manualfhjsjekdmme
This document provides maintenance procedures for a Clark lift truck. It outlines the importance of planned maintenance through regular inspections and recommends using a maintenance report form to document inspections. The summary describes the visual inspection process and checks for leaks, loose fasteners, worn parts, and proper functioning of components like the brakes, steering, hydraulics and engine systems. Functional tests of safety equipment, gauges and controls are also specified.
Clark gph 70 forklift service repair manualfhjsjekdmme
This document provides guidance on planned maintenance procedures for lift trucks. It emphasizes the importance of routine inspections and lubrication for long life and trouble-free operation. The summary outlines key steps in the planned maintenance process, including:
1. Performing a visual inspection of the entire lift truck, checking for damage, leaks, loose parts, and worn components.
2. Testing functions like the starting system, gauges, controls, lift mechanisms, and accessories to ensure proper operation.
3. Inspecting specific systems and components, such as the engine, wheels/tires, hydraulic and electrical systems, and looking for issues that require repair or adjustment.
4. Recording inspection results on a planned
Clark gph 60 forklift service repair manualfhjsjekdmme
This document provides maintenance procedures for a Clark lift truck. It outlines the importance of planned maintenance through regular inspections and recommends maintaining records using a provided report form. The summary describes maintenance checks in three key areas:
1) A visual inspection checking for leaks, loose fasteners, worn parts, and ensuring safety decals are intact.
2) Functional tests of starting systems, gauges, controls, lifting mechanisms and accessories to ensure proper operation.
3) Under-the-hood checks of belts, hoses, fluids and filters with recommended replacement intervals.
The document provides detailed inspection and maintenance instructions for various vehicle systems to maximize lift truck life and prevent operational issues.
The document provides instructions for removing and installing an operator monitor on a 336 excavator. It lists the required tools which include a clip removal tool. The removal procedure includes illustrations showing how to remove monitor mounting clips. The installation procedure states to install the monitor in the reverse order of removal.
The document is a service repair manual that provides instructions for connecting and disconnecting various components of an excavator model 336. It includes:
1) A list of required tools and replacement parts for the procedures.
2) Step-by-step instructions to disconnect components like the upper frame, undercarriage frame, and final drive.
3) Diagrams illustrating the components and steps in the procedures.
John deere 647 quick trak mower service repair manualfhjsjekdmme
This document provides specifications for the John Deere QuickTrak 647 utility vehicle. It includes specifications for the Kawasaki gasoline engine, fuel system, electrical system, battery, power train, attachment drive, steering, brakes, attachment lift, tires, dimensions, weight, and mower decks. Torque specifications are also provided for metric and inch fasteners. Recommendations are given for hydraulic fittings, O-rings, gasoline, oils, lubricants, and identifying serial numbers.
John deere 550 cs chainsaws service repair manualfhjsjekdmme
This technical manual provides specifications and safety information for John Deere 200CS, 230CS, 300CS, and 550CS chainsaws. It includes sections on general specifications, torque values, gasoline and oil recommendations, product identification numbers, and safety practices. The manual is intended as a reference for experienced technicians and contains detailed information organized by topic.
John deere 365, 375, 380, 380 a, & 390 front blades service repair manualfhjsjekdmme
This technical manual provides specifications and information for John Deere backhoes, loaders, blades, tillers and hydraulic dump units. It includes specifications on hydraulic systems, lift and drop rates, cycle times and dimensions. It also provides service recommendations for O-ring boss fittings and flat face O-ring seal fittings, including torque specifications for proper installation.
John deere 300 cs chainsaws service repair manualfhjsjekdmme
This technical manual provides specifications and safety information for John Deere 200CS, 230CS, 300CS, and 550CS chainsaws. It includes sections on general specifications, torque values, gasoline and oil recommendations, product identification numbers, and safety practices. The manual is intended as a reference for experienced technicians and contains detailed information organized by topic.
Clark op15 x forklift service repair manualfhjsjekdmme
This document provides service and repair information for an OP15X battery-powered forklift truck. It includes sections on safety, components, maintenance procedures, troubleshooting, and repair/rebuild instructions for systems such as the chassis, operator platform, battery compartment, controls, motors, transmission, brakes, wheels, steering, and hydraulics. Technical specifications and diagrams are provided for identification and repair of parts.
Clark np20 forklift service repair manualfhjsjekdmme
This service manual provides information for mechanics to maintain and service Clark electric trucks. It contains sections on the frame, controls, transmission, electrical system, hydraulic system, tires, shielding, jacking/hoisting, mast, specifications, and troubleshooting. It warns that the truck should be checked for damage when received and that only qualified mechanics should perform repairs. It provides operating rules for drivers, including checking the truck before operation and handling loads safely.
Clark np15 forklift service repair manualfhjsjekdmme
This service manual provides information for mechanics to maintain and service Clark electric trucks. It contains sections on the frame, controls, transmission, electrical system, hydraulic system, tires, shielding, jacking, mast, specifications, and troubleshooting. The manual instructs mechanics to examine trucks for damage upon arrival and check fluid levels and brakes before operation. It provides warnings for safe operation and outlines rules for qualified operators.
Clark hwx forklift service repair manualfhjsjekdmme
This document provides information about periodic maintenance of HWX/PWX trucks, including:
1. A maintenance schedule listing tasks and suggested intervals for normal, severe, and extreme operating conditions.
2. Details of a planned maintenance program involving inspections, tests, and recording truck conditions on a checklist.
3. A sample planned maintenance report form for documenting inspections.
Clark hwd 36 forklift service repair manualfhjsjekdmme
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark hwd 30 40 se service repair manualfhjsjekdmme
This document provides maintenance schedules and procedures for Clark trucks. It discusses periodic service and planned maintenance, which includes basic inspections, adjustments, and lubrications performed on a scheduled basis, usually every 50-250 hours of operation. The document provides maintenance schedules that specify all maintenance tasks that should be performed periodically, including suggested intervals. It also contains sections covering planned maintenance procedures and inspections to be performed during scheduled maintenance.
Clark hwd 30 forklift service repair manualfhjsjekdmme
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark hwd 25 forklift service repair manualfhjsjekdmme
This document provides instructions for performing planned maintenance on Clark industrial trucks. It outlines visual inspections, operational tests, and checks of components like the battery, tires, frame, control handle, steering, brakes, travel speeds, and coast control. Technicians are instructed to note any issues found on a check sheet using a coding system to indicate the urgency of repairs needed.
Clark gpx 55 forklift service repair manualfhjsjekdmme
This document is a service manual for Clark GPX/DPX 30/55 trucks. It contains copyrighted material intended only for Clark dealers. The manual includes an index, table of contents, and sections covering safety, engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications. Users are instructed to only allow trained technicians to perform maintenance following the procedures in the manual.
Clark gpx 30 forklift service repair manualfhjsjekdmme
The document provides instructions for removing and installing a transmission on a Clark forklift. It describes disconnecting all transmission connections, draining the oil, removing mounting bolts, and using lifting equipment to lower the transmission from the forklift while leaving the engine in place. Reinstallation involves mounting the torque converter to the transmission, inserting the transmission under the lifted forklift, and reconnecting all components. The process is described in 21 steps for removal and 8 steps for installation.
Clark gps standard forklift service repair manualfhjsjekdmme
- This document is the service manual for Clark lift trucks and provides information on maintenance, repair, and safety procedures.
- It instructs technicians to take safety precautions like raising the wheels, blocking components, and relieving pressure before working.
- The manual emphasizes using proper maintenance techniques and genuine Clark parts to ensure safe operation and compliance with regulations.
Clark gph 75 forklift service repair manualfhjsjekdmme
This document provides maintenance procedures for a Clark lift truck. It outlines the importance of planned maintenance through regular inspections and recommends using a maintenance report form to document inspections. The summary describes the visual inspection process and checks for leaks, loose fasteners, worn parts, and proper functioning of components like the brakes, steering, hydraulics and engine systems. Functional tests of safety equipment, gauges and controls are also specified.
Clark gph 70 forklift service repair manualfhjsjekdmme
This document provides guidance on planned maintenance procedures for lift trucks. It emphasizes the importance of routine inspections and lubrication for long life and trouble-free operation. The summary outlines key steps in the planned maintenance process, including:
1. Performing a visual inspection of the entire lift truck, checking for damage, leaks, loose parts, and worn components.
2. Testing functions like the starting system, gauges, controls, lift mechanisms, and accessories to ensure proper operation.
3. Inspecting specific systems and components, such as the engine, wheels/tires, hydraulic and electrical systems, and looking for issues that require repair or adjustment.
4. Recording inspection results on a planned
Clark gph 60 forklift service repair manualfhjsjekdmme
This document provides maintenance procedures for a Clark lift truck. It outlines the importance of planned maintenance through regular inspections and recommends maintaining records using a provided report form. The summary describes maintenance checks in three key areas:
1) A visual inspection checking for leaks, loose fasteners, worn parts, and ensuring safety decals are intact.
2) Functional tests of starting systems, gauges, controls, lifting mechanisms and accessories to ensure proper operation.
3) Under-the-hood checks of belts, hoses, fluids and filters with recommended replacement intervals.
The document provides detailed inspection and maintenance instructions for various vehicle systems to maximize lift truck life and prevent operational issues.
The document provides instructions for removing and installing an operator monitor on a 336 excavator. It lists the required tools which include a clip removal tool. The removal procedure includes illustrations showing how to remove monitor mounting clips. The installation procedure states to install the monitor in the reverse order of removal.
The document is a service repair manual that provides instructions for connecting and disconnecting various components of an excavator model 336. It includes:
1) A list of required tools and replacement parts for the procedures.
2) Step-by-step instructions to disconnect components like the upper frame, undercarriage frame, and final drive.
3) Diagrams illustrating the components and steps in the procedures.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
2. Section F2 - Transmission
Wheels and Tyres
Removal and Replacement
F2-4 F2-4F-02-03 Issue 01
Removal and Replacement
Front Wheels
Important: The wheel and tyre assembly is heavy. Get the
aid of one more person to remove and replace a wheel.
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
Removal (one wheel)
1 Park the machine and make it safe. Fit the boom
safety strut. Obey the care and safety procedures.
K Related Topics ( T F2-2)
2 Make sure that the engine cannot be started.
3 Put chocks A under the rear wheels.
4 Loosen the five wheel nuts B by half a turn.
5 Put a jack C under the axle arm. Use the correct jack.
6 Use the jack to lift the machine until the front wheel D
is off the ground.
7 Put chocks E under the axle arm.
8 Hold the wheel D and remove the wheel nuts B.
9 Remove the wheel.
Replacement
Note: Make sure that the mating surfaces of the wheel and
axle hub are clean.
!MWARNING
If, for whatever reason, a wheel stud is renewed, all the
studs for that wheel must be changed as a set, since
the remaining studs may have been damaged.
2-3-2-8
Replacement is the opposite of the removal procedure.
During the replacement procedure do this work also:
– Torque tighten the nuts B.
When the replacement procedure is complete:
– Check the wheel nut torques are correct after every
two hours of machine operation until they stay
correct.
Table 3. Torque Settings
C045590
Fig 1.
Item Nm kgf m lbf ft
B(1)
(1) 550-80 machines
650 66 480
B(2)
(2) Other machines
680 69 500
3. Section F2 - Transmission
Wheels and Tyres
Removal and Replacement
F2-5 F2-5F-02-03 Issue 01
Rear Wheels
Important: The wheel and tyre assembly is heavy. Get the
aid of one more person to remove and replace a wheel.
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
Removal (one wheel)
1 Park the machine and make it safe. Fit the boom
safety strut. Obey the care and safety procedures.
K Related Topics ( T F2-2)
2 Make sure that the engine cannot be started.
3 Put chocks A under the front wheels.
4 Loosen the five wheel nuts B by half of one turn.
5 Put a jack C under the centre of the rear axle. Use the
correct jack.
6 Use the jack to lift the machine until both rear wheels
are off the ground.
7 Put chocks E under each end of the rear axle.
8 Hold the wheel D and remove the wheel nuts.
9 Remove the wheel.
Replacement
Note: Make sure that the mating surfaces of the wheel and
axle hub are clean.
!MWARNING
If, for whatever reason, a wheel stud is renewed, all the
studs for that wheel must be changed as a set, since
the remaining studs may have been damaged.
2-3-2-8
Replacement is the opposite of the removal procedure.
During the replacement procedure do this work also:
– Torque tighten the nuts B.
When the replacement procedure is complete:
– Check the wheel nut torques are correct after every
two hours of machine operation until they stay
correct.
Table 4. Torque Settings
C045590
Fig 2.
Item Nm kgf m lbf ft
B(1)
(1) 550-80 machines
650 66 480
B(2)
(2) Other machines
680 69 500
4. Section F2 - Transmission
Wheels and Tyres
Removal and Replacement
F2-6 F2-6F-02-03 Issue 01
Wheel Studs
Removal and Replacement
The procedures that follow are for one wheel stud. The
procedures are the same for all the wheel studs.
!MWARNING
If, for whatever reason, a wheel stud is renewed, all the
studs for that wheel must be changed as a set, since
the remaining studs may have been damaged.
2-3-2-8
Removal
1 Remove the wheel from the hub. K Front
Wheels ( T F2-4) K Rear Wheels ( T F2-5)
2 Push out the wheel stud 3-A.
Important: Remove all the wheel studs 3-A and discard
them.
C045650
Fig 3.
Replacement
Important: Examine the wheel stud holes 4-B in the hub
carrier 4-C. If the holes are defective do not use the hub
carrier. Replace the hub carrier with a new one. Refer to
Applications for related axle topics. K Related
Topics ( T F2-2)
1 Put the stud 4-A into the hub carrier hole.
2 Use a nut and washer to pull in the stud 4-A into the
hub carrier 4-C.
3 Examine the stud and make sure it is correctly
installed. If the stud is loose replace the hub carrier 4-
C. Refer to Applications for related axle topics.
K Related Topics ( T F2-2)
C045650-C1
Fig 4.
5. Section F3 - Transmission
Front Axles
Introduction
F3-1 F3-1F-03-10 Issue 01
Front Axles
Introduction
Table 1. Procedure and Specification Variants
This topic contains information about a machine DEVICE. Make sure you are referring to the correct device. Refer to the
applications table.
Descriptions and procedures relate to the device and not related systems. For information about the systems refer to the
relevant topics.
This topic is intended to help you understand what the device does and how it works. Where applicable it also includes
procedures such as removal and replacement and dismantle and assemble.
K Related Topics ( T F3-2)
K Specifications ( T F3-3)
K SD80 3 Piece Steer Drive Axle ( T F3-3)
K Component Identification ( T F3-4)
K Renewing the Pinion Oil Seal ( T F3-6)
K Removal and Replacement - SD80 Fixed Axle ( T F3-7)
K Removal and Replacement - SD80 Pivot Sway Axle ( T F3-9)(1)
(1) Procedure variant. Make sure you refer to the correct procedure.
K Removal and Replacement - SD80 Trunnion Sway Axle ( T F3-12)(1)
K Dismantle, Inspection and Assembly ( T F3-15)
Procedures, Specifications(1)
(1) The table lists procedure and specification variants and the applicable machine models. Use the table to make sure
you refer to the correct information.
Machine Model Application
540-170
5AF
550-140
5AG
540-140
5AL
550-170
5AM
535-125
HiViz
5AN
535-140
HiViz
5AP
540-200
K Removal and Replacement - SD80 Pivot
Sway Axle ( T F3-9)
K Removal and Replacement - SD80
Trunnion Sway Axle ( T F3-12)
6. Section F3 - Transmission
Front Axles
Related Topics
F3-2 F3-2F-03-10 Issue 01
Related Topics
Table 2. Related Topics in This Publication
Table 3. Related Topics in Publication 9803/8610, Transmissions
The table lists other topics in the manual that contain information related to this topic. Refer to the applicable
topics to complete your procedures. Where applicable the text in this section contains cross references to this
page to help you find the correct information. Some machines have different systems and devices. Make sure
you refer to the correct topic, refer to Section 1 - Applications.
Sections Topic Titles Sub Titles
1 Applications ALL
2 ALL (Care and Safety)(1)
(1) You must obey all of the relevant care and safety procedures.
ALL
3 Maintenance ALL
F Applications ALL
F Rear Axles Renewing the Pinion Oil Seal
G Service Brakes SYSTEM Bleeding
H Steering SYSTEM Bleeding
H Steering SYSTEM Re-Phasing
The table lists topics in another manual that contain information related to this topic. Refer to the applicable
topics to complete your procedures. Where applicable the text in this section contains cross references to this
page to help you find the correct information. Some machines have different systems and devices. Make sure
you refer to the correct topics, refer to Designations. K Specifications ( T F3-3)
Sections Section Titles Topic Titles
A Axle Hubs 80 Series Hub
B Axle Hub Swivels and Driveshafts 55 Series Hub Swivel and Driveshaft
C Axle Integral Brakes 70 Series Integral Brakes (3 Piece Axles)
D Axle Drive Heads 80 Series Drive Heads (3 Piece Axles)
7. Section F3 - Transmission
Front Axles
Specifications
F3-3 F3-3F-03-10 Issue 01
Specifications
The axle serial number is stamped on the unit identification
plate A as shown.
Fig 1.
Note: It is essential that the correct ratio axle in
relationship to the gearbox ratio is fitted to the machine. Do
not fit a new axle with a different ratio to the axle being
replaced.
Table 4. SD80 3 Piece Steer Drive Axle
Designations
Hubs 80 Series
Hub swivels and drive shafts 55 Series
Drive head 80 Series 3 piece
Brakes 70 Series Integral Brakes (3 Piece Axles)
Type JCB spiral bevel input with epicyclic hub reduction
Brakes Oil immersed multi-plate discs, located in centre section
Steering Steer rams or power track rod
8. Section F3 - Transmission
Front Axles
Component Identification
F3-4 F3-4F-03-10 Issue 01
Component Identification
The illustration shows a typical 3 piece steer drive front
axle. K Fig 2. ( T F3-5)
The front axle consists of a centre casing (drivehead) and
two axle arms and swivel wheel hubs.
The drivehead houses the differential gearing and two oil-
immersed disc brake units.
The axle arms house the driveshafts. Specially shaped
spider gears in the differential provide `torque
proportioning'. This means that drive power will be kept on
one wheel if the other is slipping.
The wheel hubs are connected to the halfshafts through
universal joints which drive sun-and-planet gears inside
the hubs.
A Yoke connection to propshaft
B Pinion
C Crownwheel
D Differential unit
Note: Items A, B, C and D form the `drive head' part of
the axle.
E Drive shaft
F Universal coupling
G Reduction gear hub
H Steer swivel trunnion bearings
L Inboard oil-immersed multi-plate disc brakes
M Brake actuating piston
N Hydraulic brake lines
10. Section F3 - Transmission
Front Axles
Renewing the Pinion Oil Seal
F3-6 F3-6F-03-10 Issue 01
Renewing the Pinion Oil Seal
The front axle pinion oil seal is renewed using the same
procedure as described for the rear axles. K Related
Topics ( T F3-2)
11. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Fixed Axle
F3-7 F3-7F-03-10 Issue 01
Removal and Replacement - SD80 Fixed Axle
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
If the boom is raised, make sure the maintenance strut is
fitted. Obey the care and safety procedures. K Related
Topics ( T F3-2)
K Fig 3. ( T F3-8)
Note: Some machines may have shims installed on the
axle mounts. Make sure to note the position and quantity
of these shims before removal. Make sure to retain the
shims and replace them in the correct position when
replacing the axle. There may be an uneven number of
shims between each side of the axle as the shims are used
to adjust the machine height and make it level.
Removal
1 Disconnect the propshaft coupling from the axle by
unscrewing bolts A.
!MWARNING
When the driveshaft is disconnected the park brake
will no longer function. The machine must be securely
blocked to prevent any machine movement before
disconnecting the driveshaft.
TRANS-1-3
2 Disconnect and plug the hydraulic hoses to the steer
rams/ power track rod.
3 Slacken off the roadwheel retaining nuts C then raise
and support the front end of the machine on axle
stands or blocks positioned under the chassis.
Remove the front roadwheels.
4 Remove the front mudguards. Undo the bracket
retaining nuts E at the steering trunnions.
5 Disconnect the brake hose at the axle. Blank off the
exposed connections.
6 Uncouple the steer proximity switch electrical
connector (if fitted).
7 Support the axle on a trolley jack.
8 Unscrew axle mounting nuts D and remove the bolts
and washers.
9 Lower the axle down from the machine.
10 Remove the axle from the machine.
Replacement
Replacement is the opposite of the removal procedure.
During replacement do this work also:
– Bleed the brake system, see Section G - Brakes.
K Related Topics ( T F3-2)
– Refit the road wheels and carry out the tightness
checks as detailed in Section 3 - Routine
Maintenance. K Related Topics ( T F3-2)
– Bleed the steering system, see Section H - Steering.
K Related Topics ( T F3-2)
– Re-phase the steering system, see Section H -
Steering. K Related Topics ( T F3-2)
– Grease the axle pivot trunnions.
Table 5. Torque Settings
Item Nm kgf m lbf ft
A 78 8 57
B 56 5.7 41
C 680 69 500
D (1)
(1) Dry nuts.
969 99 715
D (2)
(2) Nuts with special dry lubricating film.
600 60 440
E 98 10 72
12. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Fixed Axle
F3-8 F3-8F-03-10 Issue 01
Fig 3. SD80 Fixed Axle
E
B
C
A
D
13. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Pivot Sway Axle
F3-9 F3-9F-03-10 Issue 01
Removal and Replacement - SD80 Pivot Sway Axle
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
If the boom is raised, make sure the maintenance strut is
fitted. Obey the care and safety procedures.K Related
Topics ( T F3-2)
Removal K Fig 5. ( T F3-11)
Removal
1 Disconnect the propshaft coupling from the axle by
unscrewing bolts A.
!MWARNING
When the driveshaft is disconnected the park brake
will no longer function. The machine must be securely
blocked to prevent any machine movement before
disconnecting the driveshaft.
TRANS-1-3
2 Disconnect and plug the hydraulic hoses to the steer
rams.
3 Slacken off the roadwheel retaining nuts C then raise
and support the front end of the machine on support
stands or blocks positioned under the chassis.
Remove the front roadwheels.
4 Remove the front mudguards. Undo the bracket
retaining nuts K at the steering trunnions.
5 Disconnect the brake hose at the axle. Blank off the
exposed connections.
6 Uncouple the steer proximity switch electrical
connector (if fitted).
7 Undo bolt D and remove pivot pin E.
8 Undo the sway ram pivot bracket mounting bolts H.
Lift away the bracket.
9 Support the axle on a trolley jack.
10 Undo bolt F and remove pivot pin G.
11 Remove the axle from the machine.
Replacement
Replacing is generally the reverse of the removal
sequence.
Replacement is the opposite of the removal procedure.
During replacement do this work also:
– Bleed the brake system, see Section G - Brakes.
K Related Topics ( T F3-2)
– Adjust the sway sight rod M so that the top of the rod
is in line with the top of the tube L when the machine
is horizontal. To adjust this slacken the locknuts N and
screw the sight rod up or down to the correct position.
Tighten the locknuts when the position is correct.
K Fig 4. ( T F3-10)
– Refit the road wheels and carry out the tightness
checks as detailed in Section 3 - Routine
Maintenance. K Related Topics ( T F3-2)
– Bleed the steering system, see Section H - Steering.
K Related Topics ( T F3-2)
– Re-phase the steering system, see Section H -
Steering. K Related Topics ( T F3-2)
– Grease the axle pivot trunnions.
14. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Pivot Sway Axle
F3-10 F3-10F-03-10 Issue 01
C127500
Fig 4.
Table 6. Torque Settings
Item Nm kgf m lbf ft
A 78 8 57
B 56 5.7 41
C 680 69 500
H 969 99 715
K 98 10 72
L
M
N
N
15. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Pivot Sway Axle
F3-11 F3-11F-03-10 Issue 01
Fig 5. SD80 Pivot Sway Axle
K
E
D
G
J
A
B
F
H
C
16. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Trunnion Sway Axle
F3-12 F3-12F-03-10 Issue 01
Removal and Replacement - SD80 Trunnion Sway Axle
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
If the boom is raised, make sure the maintenance strut is
fitted. Obey the care and safety procedures.K Related
Topics ( T F3-2)
Removal
1 Disconnect the propshaft coupling from the axle by
unscrewing bolts A.
!MWARNING
When the driveshaft is disconnected the park brake
will no longer function. The machine must be securely
blocked to prevent any machine movement before
disconnecting the driveshaft.
TRANS-1-3
2 Disconnect and plug the hydraulic hoses G to the
power track rod.
3 Slacken off the roadwheel retaining nuts then raise
and support the front end of the machine on support
stands or blocks positioned under the chassis.
Remove the front roadwheels.
4 Remove the front mudguards. Undo the bracket
retaining nuts F at the steering trunnions.
5 Disconnect the brake hose at the axle. Blank off the
exposed connections.
6 Uncouple the steer proximity switch K electrical
connector (if fitted).
7 Undo bolt D and remove pivot pin E.
8 Undo the sway ram pivot bracket mounting bolts H.
Lift away the bracket.
Fig 6.
9 Remove the access plate screws M and lift off the
plate N to get access to the front trunnion bolts.
10 Support the axle on a trolley jack.
11 Undo the six trunnion bolts B and nuts C. The top of
the bolts can be accessed from underneath the boom
as shown at L and below the access cover N.
12 Remove the axle from the machine. Be sure to
retrieve dowels J. If shims are fitted record their
positions. Use some wire to tie the trunnions to the
axle.
C053980
L
M
N
17. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Trunnion Sway Axle
F3-13 F3-13F-03-10 Issue 01
Replacement
Replacement is the opposite of the removal procedure.
During replacement do this work also:
– Bleed the brake system, see Section G - Brakes.
K Related Topics ( T F3-2)
– Adjust the sway sight rod Y so that the top of the rod
is in line with the top of the tube X when the machine
is horizontal. To adjust this slacken the locknuts Z and
screw the sight rod up or down to the correct position.
Tighten the locknuts when the position is correct.
K Fig 7. ( T F3-13)
– Make sure you re-fit dowels J together with any shims
in their original positions.
– Make sure that the axle oscillates freely before final
tightening of the fixing bolts.
– Refit the road wheels and carry out the tightness
checks as detailed in Section 3 - Routine
Maintenance. K Related Topics ( T F3-2)
– Bleed the steering system, see Section H - Steering.
K Related Topics ( T F3-2)
– Re-phase the steering system, see Section H -
Steering. K Related Topics ( T F3-2)
– Grease the axle pivot trunnions.
C127500-C1
Fig 7.
Table 7. Torque Settings
Item Nm kgf m lbf ft
A 78 8 57
B 476 48 352
C 476 48 352
H 600 60 440
F 98 10 72
X
Y
Z
Z
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Trunnion Sway Axle
F3-14 F3-14F-03-10 Issue 01
Fig 8. SD80 Trunnion Axle
A312090-C2
F
D
B
G
G J
J
C
J
J
E
K
H
A
A
20. Section F3 - Transmission
Front Axles
Dismantle, Inspection and Assembly
F3-15 F3-15F-03-10 Issue 01
Dismantle, Inspection and Assembly
Make sure that you identify the axle sub-assemblies
designations correctly. K Specifications ( T F3-3)
The procedures for dismantling, inspection and assembly
are described in the Transmissions Service Manual.
K Related Topics ( T F3-2)