The document provides instructions for disassembling the final drive and travel motor of a 305E Mini Hydraulic Excavator. It lists the required tools and gives 33 steps to remove components like gears, seals, springs, pins and bearings. Personal safety warnings are included to release pressure from springs before removing parts. Detailed illustrations accompany each step.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
2. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E MINI HYD EXCAVATOR XSC
Configuration: 305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)
Disassembly and Assembly
303E CR, 303.5E, 304E, 305.5E and 305E Mini Hydraulic Excavators Machine
Systems
Media Number -UENR0148-04 Publication Date -01/10/2016 Date Updated -25/10/2016
i06024633
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9895 Crossblock 1
B 1P-1857 Retaining Ring Pliers 1
C 9S-9152 Bearing Puller Gp 1
D 289-6052 Spanner Wrench 1
Start By:
A. Remove the final drive and the travel motor.
1/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Docu...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 6 g01244977
6. Remove gear (8) and carrier (7) .
Illustration 7 g01244979
7. Remove screws (9) , ring (10) , and gear (11) .
Illustration 8 g01244980
8. Remove gears (12) and bearings (13) .
4/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Docu...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 9 g01244981
9. Remove washers (14) .
Illustration 10 g01244982
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove plug (15) and the O-ring seal.
5/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Docu...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 11 g01244984
11. Remove spring (16) .
Illustration 12 g01244985
12. Remove plug (17) and the O-ring seal.
Illustration 13 g01244986
13. Remove spool (18) .
6/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Docu...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 14 g01244987
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove plug (19) and the O-ring seal.
Illustration 15 g01244988
15. Remove retainer (20) and spring (21) .
7/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Docu...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 16 g01244989
16. Remove spool (22) .
Illustration 17 g01244991
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
17. Remove bolts (23) and head (24) .
8/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Docu...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 18 g01244992
18. Remove port plate (25) , bearing (27) , and pins (26) .
Illustration 19 g01244993
19. Remove springs (28) from piston (32) .
20. Remove O-ring seal (29) , O-ring seals (30) , and O-ring seals (31) .
Illustration 20 g01244994
9/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Docu...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. 21. Install Tooling (A) .
22. Apply approximately 345 kPa (50 psi)of shop air pressure in order to remove piston (32) .
Illustration 21 g01244996
23. Remove O-ring seals (34) and backup rings (33) .
Illustration 22 g01244997
24. Remove barrel (36) and plate (35) .
10/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Do...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 23 g01244999
25. Remove pins (37) .
Illustration 24 g01244998
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
26. Use a suitable press and Tooling (B) in order to remove retaining ring (38) .
11/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Do...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 28 g01245007
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
30. Remove pistons (46) , balls (49) , shaft (47) , and bearing (48) .
Illustration 29 g01245008
31. Use Tooling (C) in order to remove bearing (48) from shaft (47) .
13/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Do...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 30 g01245009
32. Remove springs (50) and seal (51) .
Illustration 31 g01245010
33. Remove bolts (52) .
34. Use Tooling (D) in order to remove nut (53) .
35. Remove ring gear (54) from motor housing (55) .
14/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Do...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 32 g03779864
Illustration 33 g03779867
Illustration 34 g03779907
36. Remove plug (56) . There is a count of 132 balls (57) . Remove balls (57) .
37. Remove Duo-Cone seal (58) and bearing (59) .
15/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Do...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 35 g03779912
38. Remove Duo-Cone seal (60) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Feb 4 21:27:43 UTC+0800 2020
16/16305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Do...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 305E MINI HYD EXCAVATOR XSC
Configuration: 305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)
Disassembly and Assembly
303E CR, 303.5E, 304E, 305.5E and 305E Mini Hydraulic Excavators Machine
Systems
Media Number -UENR0148-04 Publication Date -01/10/2016 Date Updated -25/10/2016
i06906730
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9895 Crossblock 1
B 1P-1857 Retaining Ring Pliers 1
C 289-6053 2 Spanner Wrench 1
D 9S-9152 Bearing Puller Gp 1
Start By:
a. Remove the final drive and the travel motor.
1/12305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Docu...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 1 g01242982
1. Remove plug (2), ring (1), and cover (3).
Illustration 2 g01242984
2. Remove bolts (4) and retainer (5).
Illustration 3 g01242987
3. Remove gears (6), gear (8), and bearings (7).
Illustration 4 g01242988
2/12305E Mini Hydraulic Excavator XSC00001-UP (MACHINE)(SEBP6448 - 04) - Docu...
2020/2/4https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
