1. Preparing and Installing High Gloss Acrylic Kitchen
Splashbacks
The kitchen area is the centrepiece room throughout splashback-glass.co.uk the Christmas
getaway time. However prior to the sheet is mounted there are a number of preparations to
make to equally the sheet and the substrate to make certain the splashback looks its very
best.
Leading Tip: Large gloss acrylic sheet will be shipped with a masking movie on the
area to shield from scratches and marks - really don't remove this movie till the sheet
is installed!
You could wish to drill and lower the acrylic sheet prior to installing to make holes for plug
sockets, pipes or other wall functions which will interrupt your splashback. To do this
excessive care need to be taken to stop the sheet from cracking or breaking, so it is
suggested that only pre-floor twist drill bits that are made for use with acrylic sheet are
utilized. When drilling the sheet, the drill bit should be positioned gradually and very carefully
pushed by means of. Sluggish the feed as the bit reaches the other side to stop chipping of
the coloured layer, and it might be useful to use a piece of wooden as a supporting material.
To great the acrylic basically utilize tap water to the region that has been drilled.
To saw the sheet, non-vibrating large velocity equipment must be used to achieve the
cleanest-lower edges which may then be polished to restore the high gloss lustre. Round
hand and table saws may be utilized, but need to only protrude a bit past the floor of the
sheet to minimise vibration and motion. Jigsaws are also appropriate for slicing higher gloss
acrylic sheets, and will properly and neatly saw the plastic if only straight-tooth blades are
employed and if care is taken to location the shoe firmly on the masking film. This will
safeguard the acrylic from undesired chipping, preserving the edge for the most professional
complete to the splashback. As soon as once again, faucet drinking water may possibly be
used to awesome the acrylic right after slicing.
Prime Tip: Measure 2 times, minimize as soon as!
When your vibrant high gloss acrylic sheet has been formed to match your kitchen, you might
want to end the edges and restore that crystal-clear lustre to the splashback. This is
especially essential in which the edge may be visible and it will give the splashback an
virtually glass-like impact and the higher transparency of the plastic will allow the layer of
color to be noticed.
To sleek off and buff the edges of substantial gloss acrylic, moist sanding ought to very first
be carried out in 3 stages with 3 grades of sandpaper:
&bull 1st, coarse sandpaper of 80-240 grit

2. Just before applying the bonding resources to the wall, cleanse the reverse of the acrylic
sheet with isopropyl alcohol or petroleum ether, this will take away any traces of dust or
grease which may possibly undermine the adhesive. Putting in a large gloss acrylic kitchen
area splashback is a fantastic way to modernise an interior and introduce a startling colour
plan, and as we have observed they are very simple to put in and maintain.