1. MATERIAL SAFETY DATA SHEET
PRODUCT NAME : LIQTRO ASCELLA SEMI SYN
REV. April 2005
Page 1
-------------------------------------------------------------------------------
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
-------------------------------------------------------------------------------
PRODUCT DESCRIPTION : Lube oil is is a semi synthetic water-mix metalworking fluid, which does not
contain nitrites,phenols, chlorine, can safely be used on a wide range of ferrous and ferrous feedstock’s.
COMPANY IDENTIFICATION:
Smessindo Sakti Mandraguna
BLENDING PLAN and LABORATORY DIVISION
Jln. Diponegoro KM 40 No. 62 Tambun-Bekasi 17510
Phone. 62-21 8808620 Fax. 62-21- 88354786
OFFICE
Manara Era Building # 10-03
Jl. Raya Senen Kav. 135-137 Jakarta 10410
Phone. 62-21-3862426, Fax: 62-21-3863448
-------------------------------------------------------------------------------
2. HAZARDS IDENTIFICATION
-------------------------------------------------------------------------------
HEALTH HAZARDS :
• No significant effects expected
ENVIRONMENTAL HAZARDS :
• This preparation does not require classification on the basis of environmental hazard.
PHYSICAL AND CHEMICAL HAZARDS / FIRE AND EXPLOSION HAZARDS :
• Low hazard. Material can form flammable mixtures or can burn only upon heating to temperatures
at or above the flash point.
-------------------------------------------------------------------------------
3. FIRST AID MEASURES
-------------------------------------------------------------------------------
INHALATION :
• Not expected to be a problem in well-ventilated area. Using proper respiratory protection,
immediately remove the affected from overexposure victim. Administer artificial respiration if
breathing is stopped. Keep at rest. Call for prompt medical attention.
SKIN CONTACT :
• In case of frequent or prolonged contact, flush with large amounts of water; use soap if available.
EYE CONTACT :
• Immediately flush eyes with large amounts of water for at least 15 minutes. Get prompt medical
attention.
INGESTION :
• If swallowed, DO NOT induce vomiting. Keep at rest. Get prompt medical attention. If greater
than 0.5 liter ingested, immediately give 1 or 2 glasses of water and call physician and hospital for
assistance.
-------------------------------------------------------------------------------
4. FIRE-FIGHTING MEASURES
-------------------------------------------------------------------------------
FIRE FIGHTING PROCEDURES :
• Use water spray to cool fire exposed surfaces and to protect personnel.
• Use foam, dry chemical, or water spray to extinguish fire source.
SPECIAL FIRE PRECAUTIONS:
• Respiratory and eye protection required for fire fighting personnel.
• Avoid spraying water directly into storage containers due to danger of boil over.
• Prevent runoff from fire or dilution from entering streams, sewers, or drinking water supply.
-------------------------------------------------------------------------------
5. HANDLING AND STORAGE
-------------------------------------------------------------------------------
STORAGE TEMPERATURE (Deg C) : 60.0 Maximum
TRANSPORT TEMPERATURE (Deg C) : 60.0 Maximum
LOADING/UNLOADING TEMPERATURE (Deg C) : 60.0 Maximum
STORAGE/TRANSPORT PRESSURE (k Pa) : Atmospheric
STORAGE / HANDLING, GENERAL NOTES :
• Keep container closed. Handle containers with care. Open slowly in order to control possible
pressure release. Store in a cool, well-ventilated place away from incompatible materials.
• DO NOT handle, store or open near an open flame, sources of heat or sources of ignition. Protect
material from direct sunlight.
• DO NOT pressurize, cut, heat, or weld containers. Empty product containers may contain product
residue. DO NOT reuse empty containers without commercial cleaning or reconditioning.
2. MATERIAL SAFETY DATA SHEET
PRODUCT NAME : LIQTRO ASCELLA SEMI SYN
REV. April 2005
Page 2
-------------------------------------------------------------------------------
6. PHYSICAL AND CHEMICAL PROPERTIES
-------------------------------------------------------------------------------
These are indicative values only. Please refer also to the product specification sheet.
Property: LIQTRO ASCELLA SEMI SYN
0
Density @ 15 C 0,9567
Calor L 2.5
pH @ 5% (Distilled Water) 9.2
0
Flash Point COC 158 C
Solubility in water 100%
Emulsion Apperance translucent
-------------------------------------------------------------------------------
7. STABILITY AND REACTIVITY
-------------------------------------------------------------------------------
HAZARDOUS POLYMERIZATION : No
STABILITY (THERMAL, LIGHT, ETC) : Stable
CONDITION TO AVOID : Extreme Heat
MATERIALS AND CONDITIONS TO AVOID (INCOMPATIBILITY) : Strong oxidizing agents
-------------------------------------------------------------------------------
8. TOXICOLOGICAL INFORMATION
-------------------------------------------------------------------------------
INHALATION :
• Negligible hazard at ambient (-20 to 60 Deg C) or recommended blending temperature.
WARNING :
• Repeated and prolonged overexposure to oil mists may result in droplet deposition, oil granuloma
formation, inflammation and increased incidence of infection.
SKIN CONTACT :
• Low order of toxicity.
• Frequent or prolonged contact may cause mild skin discomfort.
EYE CONTACT :
• mild irritation. If not removed promptly, will injure eye tissue, which may result in permanent
damage.
INGESTION :
• Minimal toxicity.
------------------------------------------------------------------
9. DISPOSAL CONSIDERATIONS
-------------------------------------------------------------------------------
• This product is NOT suitable for disposal by either landfill or via municipal sewers, drains,
natural streams or rivers.
• This product will generate an ash if burned.
• It can be burned directly in appropriate equipment.
Additional information is available on special request
-----------------------------------------------------------------