The document outlines a lighting structure project that requires individual lights to light separately or together according to specifications. It describes exploring lighting combinations, prototyping a design where wires connect lights but are not permanently coupled so individual lights can be lit without activating connected lights, and refining the prototype to create a solution meeting specifications where all lights light in the appropriate sequence.

1. LIGHTING STRUCTURE
PROJECT
BY: DREW BARD

2. UNDERSTAND
• The goal of this project it to create a lighting structure that looks
appealing and functions according to the specifications given to us.
• Needs to look nice and function appropriately

3. EXPLORE
• Lights 1, 2, 3, and 4 must light individually
• Lights 1 and 4 must light together
• Light 1, 2, 3, and 4 must light together

4. DEFINE
• Wires run from each
individual bulb where they
either sit or connect with their
sibling wires

5. PROTOTYPE/REFINE
• After I made the first prototype I found that if the multi light wires were
connected when I tried to light a single light, the energy would travel to
all connected lights. To counter this I left the groups coupled together
but not necessarily connected

6. SOLUTION
• After refining my prototype turned out to follow the required
specifications and look decent. All lights light in the appropriate
sequence and there were no unlit lights.