Caterpillar cat 938 g series ii wheel loader (prefix b9y) service repair manual (b9y00001 and up)

Service Repair Manual
Models
938G II Wheel Loader

Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 938G II WHEEL LOADER B9Y
Configuration: 938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 3126B ENGINE
Disassembly and Assembly
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Power
Train
Media Number -RENR6068-03 Publication Date -01/12/2008 Date Updated -19/12/2008
i01886319
Torque Converter - Disassemble - Fixed
SMCS - 3101-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 154-6181 Forcing Screw 2
C 2P-8312 Retaining Ring Pliers 1
D 1P-0520 Driver Gp 1
Start By:
A. Separate the torque converter from the transmission. Refer to Disassembly and Assembly,
"Torque Converter - Separate".
1/7
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY 31...
2020/5/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...

Illustration 1 g00978219
1. Install Tooling (A) and a suitable lifting device onto cover (2). The weight of cover (2) is
approximately 159 kg (350 lb). Remove bolts (1) and remove cover (2) .
2. Attach Tooling (A) and a suitable lifting device onto the torque converter assembly. The
weight of the torque converter assembly is approximately 75 kg (165 lb). Place torque
converter assembly on a bench and remove bolts (3) .
2/7
2020/5/1

3. Install Tooling (B) and remove the impeller and carrier assembly (4). The weight of
impeller and carrier assembly (4) is approximately 36 kg (80 lb).
4. Use Tooling (C) and remove retaining ring (6). Remove retaining ring (5) and stator (7) .
3/7
2020/5/1

5. If necessary, use a suitable press and Tooling (D) in order to remove adapter (8) from stator
(7) .
6. Use Tooling (C) in order to remove retaining ring (11) from carrier assembly (12). Remove
spacer (10) .
7. Use a soft faced hammer in order to remove carrier assembly (12) from impeller (9) .
4/7
2020/5/1

8. Remove retaining ring (13) from carrier assembly (12) .
9. Remove bolts (14) and remove gear (15) from impeller (16) .
10. Use a suitable press and Tooling (D) in order to remove bearing (17) from impeller (16) .
5/7
2020/5/1

11. Remove retaining ring (18) and cover (19) .
12. Remove O-ring seal (20). Use Tooling (C) and remove retaining ring (21) .
6/7
2020/5/1

13. Remove spacer (22) .
14. Use a suitable press and Tooling (D) in order to remove bearing (24) from housing (23) .
15. Remove bolts (25) and hub assembly (26) from turbine (27) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri May 1 18:20:55 UTC+0800 2020
7/7
2020/5/1

Shutdown SIS
Previous Screen
Train
i01885710
Torque Converter - Disassemble - Free Wheel
SMCS - 3101-015
Disassembly Procedure
Table 1
Required Tools
B 154-6181 Forcing Screw 2
D 1P-0520 Driver Gp 1
Start By:
A. Separate the torque converter from the transmission. Refer to Disassembly and Assembly,
"Torque Converter - Separate".
1/10
2020/5/1

1. Install Tooling (A) and a suitable lifting device onto cover (2). The weight of cover (2) is
approximately 159 kg (350 lb). Remove bolts (1) and remove cover (2) .
2. Attach Tooling (A) and a suitable lifting device onto the torque converter assembly. The
weight of the torque converter assembly is approximately 75 kg (165 lb). Place torque
converter assembly on a bench and remove bolts (3) .
2/10
2020/5/1

3. Install Tooling (B) and remove the impeller and carrier assembly (4). The weight of
impeller and carrier assembly (4) is approximately 36 kg (80 lb).
4. Use Tooling (C) in order to remove retaining ring (5). Remove stator (14) .
3/10
2020/5/1

5. Remove retaining ring (6) and plate (7) .
6. Remove washer (8) .
7. Remove race (9) .
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4/10
2020/5/1

8. Remove springs (10) and rollers (11) .
9. Remove retaining ring (12) and washer (13) .
5/10
2020/5/1

10. If necessary, raise the temperature of stator (14) and cam (15). Use a suitable press and
Tooling (D) in order to remove cam (15) .
6/10
2020/5/1

12. Use a soft faced hammer in order to remove carrier assembly (17) from impeller (18) .
13. Remove retaining ring (19) from carrier assembly (17) .
14. Remove bolts (20). Remove gear (21) from impeller (18) .
7/10
2020/5/1

15. Use a suitable press and Tooling (D) in order to remove bearing (22) .
16. Remove retaining ring (23) and cover (24) .
17. Use Tooling (C) and remove retaining ring (25). Remove O-ring seal (26) .
8/10
2020/5/1

19. Use a suitable press and Tooling (D) in order to remove bearing (28) from housing (29) .
9/10
2020/5/1

20. Remove bolts (30). Remove hub (31) from turbine (32) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri May 1 18:21:52 UTC+0800 2020
10/10
938G SERIES II WHEEL LOADER B9Y00001-UP (MACHINE) POWERED BY ...
2020/5/1

Shutdown SIS
Previous Screen
Train
i01885788
Torque Converter - Assemble - Free Wheel
SMCS - 3101-016
Assembly Procedure
Table 1
Required Tools
1. Lower the temperature of bearing (28) and install bearing (28) into housing (29) .
1/8
2020/5/1

2. Install bolts (30). Tighten bolts (30) to a torque of 60 ± 7 N·m (44 ± 5 lb ft).
3. Lower the temperature of hub assembly (31) and install hub (31) into housing (29) .
2/8
2020/5/1

Note: Check the O-ring seal for wear or for damage. If necessary, replace the O-ring seal.
4. Install a new O-ring seal (26). Install spacer (27). Use Tooling (C) and install retaining ring
(25) .
5. Position cover (24) and install retaining ring (23) .
6. Lower the temperature of bearing (22) and install bearing (22) .
3/8
2020/5/1

7. Install gear (21) onto impeller (18). Install bolts (20). Tighten bolts (20) to a torque of 105 ±
15 N·m (77 ± 11 lb ft).
8. Install retaining ring (19) onto carrier assembly (17) .
4/8
2020/5/1

Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.

9. Use a soft faced hammer and install carrier assembly (17) .
10. Install spacer (16) .
11. Install race (9) .
5/8
2020/5/1

Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
12. Install rollers (11) and springs (10). Install springs (10) with the maximum number of loops
toward the outside diameter of the cam.
13. Install washer (13) and retaining ring (12) .
6/8
2020/5/1

14. Install washer (8) .
15. Install plate (7) and install retaining ring (6) .
16. Install stator (14) onto carrier assembly (17). Use Tooling (C) and install retaining ring (5) .
7/8
2020/5/1

Caterpillar cat 938 g series ii wheel loader (prefix b9y) service repair manual (b9y00001 and up)

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to Caterpillar cat 938 g series ii wheel loader (prefix b9y) service repair manual (b9y00001 and up)

Similar to Caterpillar cat 938 g series ii wheel loader (prefix b9y) service repair manual (b9y00001 and up) (7)

More from didkskdkmdm

More from didkskdkmdm (20)

Recently uploaded

Recently uploaded (20)

Caterpillar cat 938 g series ii wheel loader (prefix b9y) service repair manual (b9y00001 and up)