Jinko Solar produces high efficiency mono-crystalline solar panels. Their Eagle PERC 60M-V panel has an efficiency of up to 19.24% using PERC technology. It is certified to withstand high winds and snow loads and is resistant to humidity and corrosion. Jinko Solar offers a 25 year linear power warranty to guarantee 80% of the panel's nameplate power output at the end of 25 years.

1. www.jinkosolar.com
KEY FEATURES
Higher module conversion efficiency(up to 19.24%) benefit from Passivated
Emmiter Rear Contact (PERC) technology.
Eagle PERC 60M-V
Positive power tolerance of 0~+3%
295-315 Watt
MONO CRYSTALLINE MODULE
ISO9001:2008、ISO14001:2004、OHSAS18001
certified factory.
IEC61215、IEC61730 certified products.
High Efficiency:
Advanced glass and solar cell surface texturing allow for excellent
performance in low-light environments.
Low-light Performance:
Certified to withstand: wind load (2400 Pascal) and snow load (5400 Pascal).
Severe Weather Resilience:
High salt mist and ammonia resistance certified by TUV NORD.
Durability against extreme environmental conditions:
LINEAR PERFORMANCE WARRANTY
10 Year Product Warranty 25 Year Linear Power Warranty
80.2%
90%
95%
97%
100%
1 5 12 25
years
GuaranteedPowerPerformance
linear performance warranty
Standard performance warrantyAdditional value from Jinko Solar’s linear warranty
5 Busbar Solar Cell:
5 busbar solar cell adopts new technology to improve the efficiency of
modules , offers a better aesthetic appearance, making it perfect for rooftop
installation.
(5BB)
PERC
Eagle modules pass PID test, limited power degradation by PID test is
guaranteed for mass production.
PID RESISTANT:
PID RESISTANT
System Voltage:
The maximum voltage is promoted to 1500V and the module strings are
extended by 50% which reduces the overall system BOS.

2. Current-Voltage & Power-Voltage
Curves (295W)
Temperature Dependence
of Isc,Voc,Pmax
Packaging Configuration
( Two pallets =One stack )
Engineering Drawings
Mechanical Characteristics
The company reserves the final right for explanation on any of the information presented hereby. EN-JKM-315M-60-PERC-V_v1.0_rev2017
Cell Type
No.of cells
Dimensions
Weight
Front Glass
Frame
Junction Box
Output Cables
Mono-crystalline PERC 156×156mm (6 inch)
60 (6×10)
1650×992×40mm (65.00×39.05×1.57 inch)
3.2mm, High Transmission, Low Iron, Tempered Glass
Anodized Aluminium Alloy
IP67 Rated
SPECIFICATIONS
Electrical Performance & Temperature Dependence
26pcs/pallet , 52pcs/stack, 728 pcs/40'HQ Container
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
4.5
14
9 5.555
55
3
8
992
A
A
2
-50 -25 0 25 50 75 100
20
40
60
80
100
120
140
160
180
Isc
Voc
Pmax
Irradiance 1000W/m2
AM=1.5STC:
Irradiance 800W/m 2
AM=1.5NOCT:
Power measurement tolerance: ± 3%*
Wind Speed 1m/s
Module Type
Maximum Power (Pmax)
Maximum Power Voltage (Vmp)
Maximum Power Current (Imp)
Open-circuit Voltage (Voc)
Short-circuit Current (Isc)
Module Efficiency STC (%)
Operating Temperature(℃)
Maximum system voltage
Maximum series fuse rating
Power tolerance
Temperature coefficients of Pmax
Temperature coefficients of Voc
Temperature coefficients of Isc
Nominal operating cell temperature (NOCT)
-40℃~+85℃
1500VDC (IEC)
20A
0~+3%
-0.39%/℃
-0.29%/℃
0.048%/℃
45±2℃
Cell Temperature 25°C
Ambient Temperature 20°C
5 10 15 20 25 30 35 400
0
2
4
6
8
10
12
0
50
100
150
200
250
300
18.5 kg (40.8 lbs)
200 W/m2
400 W/m2
600 W/m2
800 W/m2
1000 W/m2
+ 942 2+
13601+
8601+
H 0.5+
16502+
Junction box
ＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸＸ
100
L
Cathode - + Anode
Connector
Label
Ⅰ
Installing Holes
Grounding Holes
2-Ø
4
35
7.7
40
²TÜV 1×4.0mm, Length: 900mm or Customized Length
JKM315M-60-V
315Wp
33.2V
9.49A
40.7V
10.04A
19.24%
235Wp
7.56A
31.2V
37.6V
8.33A
STC NOCT
JKM295M-60-V
295Wp
32.4V
9.10A
39.7V
9.61A
18.02%
220Wp
7.24A
30.4V
36.8V
7.89A
STC NOCT
JKM300M-60-V
300Wp
32.6V
9.21A
40.1V
9.72A
18.33%
224Wp
7.32A
30.6V
37.0V
8.01A
STC NOCT
JKM305M-60-V
305Wp
32.8V
9.30A
40.3V
9.83A
18.63%
227Wp
7.40A
30.8V
37.2V
8.12A
STC NOCT
JKM310M-60-V
310Wp
33.0V
9.40A
40.5V
9.92A
18.94%
231Wp
7.49A
31.0V
37.4V
8.20A
STC NOCT