Civil Engineering and Urban Planning: An International Journal (CiVEJ)

•

0 likes•6 views

Civil Engineering and Urban Planning: An International Journal (CIVEJ) is an open-access, peer-reviewed journal that publishes articles which contribute new results in all areas of the Civil Engineering and Urban Planning. The journal is devoted to the publication of high-quality papers on theoretical and practical aspects of Civil Engineering and Urban Planning. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on Civil Engineering and Urban Planning advancements, and establishing new collaborations in these areas. Original research papers, state-of-the-art reviews are invited for publication in all areas of Civil Engineering and Urban Planning.

Design

Civil Engineering and Urban Planning: An International Journal (CiVEJ)
ISSN : 2394 -5810
https://airccse.com/civej/index.html
Call for papers
Civil Engineering and Urban Planning: An International Journal (CIVEJ) is an open-access,
peer-reviewed journal that publishes articles which contribute new results in all areas of the Civil
Engineering and Urban Planning. The journal is devoted to the publication of high-quality papers
on theoretical and practical aspects of Civil Engineering and Urban Planning. The goal of this
journal is to bring together researchers and practitioners from academia and industry to focus on
Civil Engineering and Urban Planning advancements, and establishing new collaborations in
these areas. Original research papers, state-of-the-art reviews are invited for publication in all
areas of Civil Engineering and Urban Planning.
All submissions must describe original research, not published or currently under review for
another conference or journal.
Topics of interest include but are not limited to, the following
o Civil Engineering Profession / Education
o Construction Safety & Fire Engineering
o Disaster Mitigation & Management
o Earthquake Resistant Design Practices
o Environmental Engineering & Management
o Foundations In Problematic Soils
o Geo-environmental Engineering
o GIS & Remote Sensing
o Ground Improvement Techniques
o Health, Safety & Environment
o Infrastructure Engineering
o Irrigation, Water Resources & Management
o Modern Construction Materials
o Retrofitting / Rehabilitation OfStructures
o Sustainable Development & Construction
o Transportation Engineering & Traffic Planning
o Urban planning
Paper submission
Authors are invited to submit papers for this journal through E-mail: civej@airccse.com.
Submissions must be original and should not have been published previously or be under
consideration for publication while being evaluated for this Journal.

Important Date
Submission Deadline: February 19, 2022
Notification : March19, 2022
Final Manuscript Due: March 26, 2022
Publication Date: Determined by the Editor-in-Chief
Contact us:
Here's where you can reach us: civejjournal@yahoo.com or civej@airccse.com

Similar to Civil Engineering and Urban Planning: An International Journal (CiVEJ)

International Journal of Civil Engineering and Urban Planning(IJCIVLE)is an open-access, peer-reviewed journal that publishes articles which contribute new results in all areas of the Civil Engineering and Urban Planning. The journal is devoted to the publication of high quality papers on theoretical and practical aspects of Civil Engineering and Urban Planning. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on Civil Engineering and Urban Planning advancements, and establishing new collaborations in these areas. Original research papers, state-of-the-art reviews are invited for publication in all areas of Civil Engineering and Urban Planning. . The journal is devoted to the publication of high quality papers on theoretical and practical aspects of Civil Engineering and Urban Planning. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on Civil Engineering and Urban Planning advancements, and establishing new collaborations in these areas.

International Journal of Civil Engineering and Urban Planning(IJCIVLE)

ijfcst journal

International Journal of Civil Engineering and Urban Planning(IJCIVLE)

ijfcst journal

Civil Engineering and Urban Planning: An International Journal (CiVEJ) is an open-access, peer-reviewed journal that publishes articles which contribute new results in all areas of the Civil Engineering and Urban Planning. The journal is devoted to the publication of high quality papers on theoretical and practical aspects of Civil Engineering and Urban Planning. The goal of this journal is to bring together researchers and practitioners from academia and industry to focus on Civil Engineering and Urban Planning advancements, and establishing new collaborations in these areas. Original research papers, state-of-the-art reviews are invited for publication in all areas of Civil Engineering and Urban Planning.

Civil Engineering and Urban Planning: An International Journal (CiVEJ)

civejjour

Civil Engineering and Urban Planning: An International Journal (CiVEJ)

civejjour

International Journal of Civil Engineering and Urban Planning(IJCIVLE)

ijfcst journal

International Journal of Civil Engineering and Urban Planning(IJCIVLE)

ijfcst journal

International Journal of Civil Engineering and Urban Planning(IJCIVLE)

ijfcst journal

International Journal of Civil Engineering and Urban Planning(IJCIVLE)

ijfcst journal

International Journal of Civil Engineering and Urban Planning(IJCIVLE)

ijfcst journal

Similar to Civil Engineering and Urban Planning: An International Journal (CiVEJ) (9)

International Journal of Civil Engineering and Urban Planning(IJCIVLE)

Civil Engineering and Urban Planning: An International Journal (CiVEJ)

International Journal of Civil Engineering and Urban Planning(IJCIVLE)

More from civejjour

Man’s history and developmental endeavour have been advancing alongside a trail of ecological ramifications and climate change. Since prehistoric times, scientists have not recorded an accelerated shift in ecology during any other epoch beside that of modern man on the planet. The paper seeks to explore how man’s history and development affects ecology and climate. It uses desk analysis to recollect data from global assessment reports and runs a One paired Sample Means t-Test, 1 tailed, 8 df, at Pearson Correlation value 0.458 and 0.5  level. Findings show that, there is global climate change, seen in global warming trends; and imbalance in ecological footprint, seen in depletion of air, water and land sinks. The t-Test reveals significant net loss of global forest cover. The study also, found that at present, processes of development generally tend to damage ecology. Therefore, the study recommends a refocus to sustainable means of development.

The Dynamics of Man's History and Economic Development: A Refocus on Ecologic...

civejjour

The economic impact of construction cost overrun is a possible loss of the economic justification for the project. The financial impact of a cost overrun results in demand for construction investment credits. Therefore reliable estimates of construction cost are an important aspect to the contemporary construction companies especially during the conceptual phase of lifecycle management. In this paper a cost-effective analysis is done using one of the cost effective construction technique called Rat Trap Bond versus Flemish bond and when estimated with CPWD 2012 schedule of rates it is proved that Low cost techniques such as rat trap bond provides better cost effectiveness as compared to conventional Flemish bond construction method.

Cost Effective Methods in Construction Engineering

civejjour

The need for near-surface soils and rocks characterization at planned construction sites, using geophysical techniques, has grown rapidly during the last few decades to map the variations in the soil stiffness and the depth to bedrock. Although borehole data are important in geotechnical engineering, providing information on stability and strength of soils and rocks, it is limited to a few points. To take borehole data on the hole construction site becomes necessary increase the borehole density, which makes the project very expensive. Geophysical techniques have the advantage in collecting information of large volume of soils and rocks in its natural state. The Soyo Road was opened to traffic in 2017 but, due to the lack on soils and rocks physic-mechanical properties information, there is still to complete a section of about 700 meters in the mangrove zone. Geophysical techniques were applied with the main goal of providing technical information, essential for the completion of the targeted road section. Electrical resistivity data was recorded along a profile of 820m long, using forty-two electrodes20-meter spaced, under pole-dipole array. Seismic measurements were taken using twenty-four geophones, 5-meter spaced, 115-meter length spread. Five seismic spreads were connected, generating a seismic line of 575-meters long. Measured geophysical data were processed using EarthImager 2D, SeisImager/2D and SeisImager/SWpackages. Electrical resistivity section shows two zones, the first associated with unconsolidated and/or poorly consolidated soils, composed by clay, silt, sandy, carbonated rocks mixed with sloth and organic clay and, the second associated with rock, composed by clay, all them saturated with marine saltwater. Seismic refraction section shows an interface separating non-compacted soils and unconsolidated rocks to compacted soils. Multi-channel analysis of surface waves model shows an alternating sequence of horizontal horizons in the investigated first ≈25-meter depth, composed by non-compacted soils and/or unconsolidated rocks and compacted soils. Due to its shear velocity values the site is constituted by soft and stiff soils, composed by homogeneous organic matter and elements of mineral origin, responsible for the ruptures and landslides that occurred and for the sinking of the structures built on the site.

Geotechnical Characterization on the Soyo Road Section using Electrical Resis...

civejjour

Ubiquitous reinforced concrete water storage tanks are quite popular and widely used in Palestine as in elsewhere in the world; they form pivotal components of major bulk-water carrier systems. In essence, they form lifelines to many communities; the water storage concept is as old as civilization itself. Location and land availability often dictate the topology of the tank’s structure. They may be either shallow and stubby or deep yet slender or anywhere in between having an aspect ratio dictated by overall site conditions. In all cases adequate structural analysis is mandatory.

The Impact of Aspect Ratio on the Behaviour of Rigid Water Storage Tanks

civejjour

Urban Planning is a technical process concerned with the control of the use of land and design of urban environment to guide and ensure the orderly development of settlements and communities. Outcomes from the urban planning process are detailed plans. In Bahrain the detailed plans are developed through a lengthy two-stage process, namely, design and implementation. During this lengthy process the documented design variations were found to be the main cause for implementation delay. In addition, it was discovered that land owners exclusion from the urban planning process caused major disagreements, between the urban planning authorities and the land owners. Accordingly, this paper presents an investigation into the applied urban planning process in Bahrain, and proposes a solution that incorporates Quality Function Deployment (QFD) technique. The study is based on face-to-face interviews, questionnaire, Delphi method, and a case study (North Tubli). The results of this study concluded that using participatory planning and QFD within the urban planning process enables evaluation of the different alternative plans, based on scientific and systematic procedures. In addition, it ensures that land owners and community members requirements are satisfied.

Incorporating Participatory Planning and Quality Function Deployment in Urban...

civejjour

Solid waste management especially residential organic waste management is one of the most important problems after the water quality in developing countries all over the world. There are many waste management techniques for the disposal of these wastes. Attaining sustainability goals is the challenge faced by each of these techniques. This paper presents the evaluation study of the biogas technology as a sustainable domestic organic waste management measure. The evaluation method is detailed and the perception of the biogas users with respect to different aspects of sustainability is presented here. The technological benefits and bottle necks were also reviewed in this paper.

Biogas Technology as a Sustainable Domestic Organic Waste Management Measure ...

civejjour

The aim of this study is to investigate the impact of aircraft noise pollution on community and workers’ health near Abu Dhabi International Airport. This study was conducted in residential neighborhoods and employment areas living and working within a 25-km radius of the airport with high exposure to aircraft noise and in matched control areas far from the airport (outside the 25-km radius) and are unaffected by aircraft noise. Data was collected by conducting a revealed-preference face-to-face interview surveys among the residents and the workers nea rand far from Abu Dhabi International Airport during the months of September and December 2014. A total of 5,070 residents in both areas (2,579 near the airport and 2,492 far from the airport) and 1,995 workers in both areas (995 near the airport and 1,000 far from the airport) were interviewed and completed the questionnaire. Binomial Logit Regression Model was used to determine the impact of aircraft noise on community and workers’ health. After controlling for confounders, the health of the residents adjacent to the airport who have been chronically exposed to high aircraft noise level are found to be worse than the control group. The results show that residents from the noise exposure area have a high level of noise stress, hypertension, headache, general disturbance, loss of sleep/insomnia, and hearing problems than the matched control area. On the other hand, aircraft noise pollution near Abu Dhabi Airport has no negative impact on workers adjacent to the airport. The impact of aircraft noise on community health should not restrain the growth of air travel industry in the city as this growth is essential and beneficial to the whole nation’s economy. The reduction of aircraft noise level in the exposed area could be achieved by imposing policies, codes of practices, and action noise plans to assess and evaluate land use management as an effective tool for mitigating aircraft noise. Future research should assess community health based on self-reported physician diagnosed blood pressure; and hearing, stress, headache diagnostic examination.

STUDYING THE EFFECTS OF AIRCRAFT NOISE AROUND ABU DHABI INTERNATIONAL AIRPORT...

civejjour

Studying the Effects of Aircraft Noise Around Abu Dhabi International Airport...

civejjour

Concrete is the most important material in the civil engineering. The concrete compressive strength is a non-linear function of the concrete age and some constituents. These constituents include cement, blast furnace slag, fly ash, superplasticizer, coarse aggregate and fine aggregate. The superplasticizers are among elements which are important in increasing the concrete compressive strength and we are going to analyze here using the tree-classification decision algorithm. The decision trees, usually, are used in classification of a bunch of data. J48 is one of the most favoured ones. The decision trees are developed using information entropy on a collection of training data. J48 is a recursive algorithm that combines the remaining of the following data sets and continues normalizing the output data using the separation process until a uniform classification result obtains. This article evaluates the superplasticizer effect on the concrete compressive strength using the tree-classification decision algorithm.

Evaluation of the Superplasticizer Effect on the Concrete Compressive Strengt...

civejjour

Project cost is one of the three main challenges for the construction manager, where the success of a project is judged by meeting the criteria of cost with budget, schedule on time, and quality as specified by the owner. Many projects experience extensive delays and thereby exceed initial time and cost estimate. Available information, good estimating practice and experienced personnel are some of the factors found to have considerable impact on estimation accuracy. The successful execution of construction projects and keeping them within estimated cost and prescribed schedules depend on a methodology that requires sound engineering judgment. So the research aim is to conduct research study and process of exploring the existing model related to above three types of estimate and their contribution to civil engineering cost management and control especially getting motivated with the verification and validation component of CRASP methodology. The objective of this paper or scope of this research in this paper is to conduct literature study and review towards exploring innovative techniques such as Artificial Intelligence Techniques or Expert System Techniques available and applicable to make decision making or decision support regarding construction cost management and control at three levels: (i) before the actual civil engineering project design begins (ii) after detailed design but before execution and (iii) during project execution

Towards Innovate Methods of Construction Cost Management and Control

civejjour

Incorporating Participatory Planning and Quality Function Deployment in Urban...

civejjour

Biogas Technology as a Sustainable Domestic Organic Waste Management Measure ...

civejjour

Studying the Effects of Aircraft Noise Around Abu Dhabi International Airport...

civejjour

In the present research work, traditional mineral filler, high calcium Fly Ash, is used in the mix design of micro surfacing is evaluated with possibility of replacing it with other environmental friendly and cost effective selected fillers. The chemical analysis and material testing performed on high calcium Fly Ash filler indicate its suitability for incorporation in the mix design. The optimum mix design for microsurfacing Type II and Type III is determined through trial and error method. Also, the performance of a laboratory design mix is evaluated with field application. The field experimentation indicate that the mineral filler showed good performance for the test conducted on field after 24 hours and 6 months of application. The results evaluated in the field for skid resistance and surface texture indicate high calcium Fly Ash can be utilized for microsurfacing of road pavement.

Evaluation of Performance of High Calcium Fly Ash as a Mineral Filler in Mix ...

civejjour

This study attempts to make use of traffic behaviour on the aggregate level to estimate congestion on urban arterial and sub-arterial roads of a city exhibiting heterogeneous traffic conditions by breaking the route into independent segments and approximating the origin-destination based traffic flow behaviour of the segments. The expected travel time in making a trip is modelled against sectional traffic characteristics (flow and speed) at origin and destination points of road segments, and roadway and segment traffic characteristics such as diversion routes are also tried in accounting for travel time. Predicted travel time is then used along with free flow time to determine the state of congestion on the segments using a congestion index (CI). A development of this kind may help in understanding traffic and congestion behaviour practically using easily accessible inputs, limited only to the nodes, and help in improving road network planning and management.

Intelligent Transportation System Based Traffic Congestion Modeling for Urban...

civejjour

The phenomenon that pedestrian violates traffic signals at intersections and crosses with danger is universal. This study aims to find out the influence of the waiting time of pedestrians at an intersection and the three main factors of pedestrian violations. In this study, 13 intersections and 1075 violations sample were collected in Suzhou China, which had different maximum waiting times. The validation would use the complementary video data. There are several factors, which have great influence on the proportion of pedestrian violations, such as the age, sex, arrive time, red phase, conflicting traffic volume and the length of volume crosswalks. Additionally, The significance of pedestrian maximum waiting time was highlighted in the end. For the purpose of reducing dangerous pedestrian behaviors at signalized intersections, minimizing waiting times is supposed to be one proper way.

The Impact of Waiting Time on Pedestrian Violations at Signalized Intersections

civejjour

There are many factors contributing in emergence of an architectural works including form, content, performance and technology. Form means the shape and geometry, content refers to theoretical foundations of a work, performance signifies efficiency and utilization of space and technology includes machines, tools and manufacturing method. Technology involves both materialistic elements and human activities. Since human behavior is affected by the surrounding atmosphere while forming a part of their identity, therefore, technology affects human and their identity as a part of environment. In the current article, the definition of technology, its views and its effects on the environment and architectural spaces were examined. In addition, the similarities and differences between modern and traditional technology and each effect on architectural space and human were analyzed. Finally, a strategy was proposed for appropriate application of modern technology in Iranian architecture.

Philosophical Investigation of Technology and its Effect on Human and Archite...

civejjour

The modelling of the urban microclimate, in particular the phenomenon of the Urban Heat Island (UHI), is becoming increasingly essential for city planning and urban design. The phenomenon analysis is henceforth possible thanks to the increase in computational power, the link between simulation tools and urban databases, which allow to represent explicitly the characteristics of the urban microclimate and to better understand its effects, through the analysis and evaluation of the different impacts of the urban climatic or anthropogenic contributors. However, the choice of the scale of the study depends on the accuracy of the modelling approaches, the capacities of calculation and the availability and reliability of the data. The contribution aims to highlight the phenomenon of the UHI based on a bibliographic study of the latest research on this topic in Maghreb cities and the different strategies for adapting them to climate change and for improving their resilience.

Civil Engineering and Urban Planning: An International Journal (CiVEJ)

civejjour

With the progression of innovation and present day science, individuals are expecting data about the area of any protest for following purposes. GPS is a framework which has been executed and is open with no confinement. Having the office of GPS, we require a GPS gadget to compute the area from the data taken from GPS. This paper exhibits an examination on Area Based Services and is coordinated on finding and following of Android gadgets. In this usage I am utilizing Global Positioning System (GPS) and Web Services, and android advanced mobile phone gadget Bhuvan Geotag for Route Planning since Android gadgets have a worked in highlight of GPS benefit. Some most recent requesting devices and innovation utilized for this execution are Java, AVD, WAMP etc. A Location-Based Service (LBS) gives data and administration of the topographical position of the cell phone. This should be possible through the portable system and using the capacity to influence utilization of that data. So as to decide the area of client's cell phone in a LBS application, situating advances or a situating part. For example, satellite situating, cell organize situating, WLAN stations or radio signals is required. Subsequently the greater part of the present LBS administrations don't require clients to enter area physically, for example, giving road name or postal district. Specialist co-ops are likewise required since they offer unique sorts of LBS administrations to clients and are in charge of preparing administration asks for and reacts back by sending ask for comes about. Servers can compute areas or position, scan for a way or seek particular data with respect to use position. Typically all the data asked for by clients are not store and keep up by the Service suppliers, geographic information are gather and put away by content supplier information. For example, Location based related information are additionally gather and store by the content supplier. Administration servers will demands and process these information and after that came back to clients.

Remote Sensing and Geographic Information System Based Route Planning

civejjour

Based on reviews of existing plans as well as interviews and conversations with 153 people that live in Alaska Native Villages (ANVs) or influence ANVs plans and policies, this article describes how planning for climate change adaptation and hazard mitigation takes place and provides suggestions for improvement. Planning processes are generally initiated and overseen by outside entities and have limited community participation, as they are disconnected from community events and activities. A more participatory approach that engages ANV residents by building on existing indigenous community practices may be more helpful in developing a common vision for adaptation. Planners could improve planning by spending more time talking to community members, and if desired by ANVs mentoring leadership to better engage in the process and assisting with dispute resolution. ANVs could improve planning by providing for activities that foster connectivity and a common vision and supporting efforts to build community leadership.

Towards more Community-Oriented and Collaborative Planning for Alaska Native ...

civejjour

More from civejjour (20)