The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. The steps include removing covers, gears, shafts, seals, and other components. Special tools are required for tasks like removing retaining rings and carrier assemblies. Safety notes are included to clean parts before disassembly and have additional assistance when removing heavier parts weighing over 30 kg. The detailed process takes the final drive completely apart down to individual planetary gears and shafts.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...hhjsekmdmm
This document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 31 steps to fully disassemble the final drive. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Proper safety equipment and lifting devices are required due to the heavy weights involved, such as the 550 kg total weight of the entire final drive assembly. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar cat 330 d excavator (prefix nbd) service repair manual (nbd00001 ...hhjsekmdmm
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. Key components that are disassembled include the drive housing, planetary gear assemblies, ring gear, carrier assemblies, and individual planet gears. Tools required include link brackets and forcing bolts to remove components. Safety notes are provided to clean parts before disassembly and have two people assist with heavier components.
Caterpillar cat 330 d excavator (prefix thj) service repair manual (thj00001 ...hhjsekmdmm
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Proper tools are required and safety notes are provided regarding cleanliness and part weights which can be substantial.
Caterpillar cat 390 d l excavator (prefix wag) service repair manual (wag0000...fujskekfmsme
This document provides instructions for disassembling and assembling the final drive of a 390D L excavator. It lists the required tools and parts. The disassembly process involves removing over 30 components of the final drive including housing covers, gears, shafts, and seals. Photographs illustrate each step. Precautions are outlined to prevent dirt contamination. The assembly section lists a similar process and notes to inspect parts and apply sealant lubricants.
Caterpillar cat 330 d2 l excavator (prefix szk) service repair manual (szk000...fjskkksmemm
This document provides instructions for disassembling and assembling the final drive of an excavator model 330D2 L. The disassembly process involves removing over 30 individual components in a specific sequence. This includes removing gears, shafts, bearings, seals, and housing components. The assembly process reverses the disassembly steps and provides details on cleaning, lubricating, and setting proper bearing preloads using shims. Special tools are required for tasks like installing dual-cone seals.
This document provides instructions for disassembling and assembling the final drive of a 330D2 excavator. The disassembly process involves using various tools to remove 37 individual parts from the final drive assembly. The assembly process similarly uses tools to reinstall the parts in the reverse order, ensuring proper installation of seals and adjusting bearing preload through precise shimming.
The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It begins by removing the final drive assembly and placing it on a repair stand. Key steps include removing the cover, gears, shafts, carriers, and planetary gears. Tools needed are listed. Detailed illustrations accompany each step to show how to remove each component. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Caterpillar cat 325 d l excavator (prefix nac) service repair manual (nac0000...fjsekdmmeed
This document provides repair instructions for a 325D L excavator transmission. It outlines 33 steps to disassemble and reassemble the transmission components. Key parts include the main housing, motor housing, bearings, seals, gears, carriers, plugs, and cover. The instructions emphasize cleanliness and applying anti-seize compound to parts during assembly. Precise measurements and shimming are required to set bearing preload.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...hhjsekmdmm
This document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 31 steps to fully disassemble the final drive. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Proper safety equipment and lifting devices are required due to the heavy weights involved, such as the 550 kg total weight of the entire final drive assembly. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar cat 330 d excavator (prefix nbd) service repair manual (nbd00001 ...hhjsekmdmm
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. Key components that are disassembled include the drive housing, planetary gear assemblies, ring gear, carrier assemblies, and individual planet gears. Tools required include link brackets and forcing bolts to remove components. Safety notes are provided to clean parts before disassembly and have two people assist with heavier components.
Caterpillar cat 330 d excavator (prefix thj) service repair manual (thj00001 ...hhjsekmdmm
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Proper tools are required and safety notes are provided regarding cleanliness and part weights which can be substantial.
Caterpillar cat 390 d l excavator (prefix wag) service repair manual (wag0000...fujskekfmsme
This document provides instructions for disassembling and assembling the final drive of a 390D L excavator. It lists the required tools and parts. The disassembly process involves removing over 30 components of the final drive including housing covers, gears, shafts, and seals. Photographs illustrate each step. Precautions are outlined to prevent dirt contamination. The assembly section lists a similar process and notes to inspect parts and apply sealant lubricants.
Caterpillar cat 330 d2 l excavator (prefix szk) service repair manual (szk000...fjskkksmemm
This document provides instructions for disassembling and assembling the final drive of an excavator model 330D2 L. The disassembly process involves removing over 30 individual components in a specific sequence. This includes removing gears, shafts, bearings, seals, and housing components. The assembly process reverses the disassembly steps and provides details on cleaning, lubricating, and setting proper bearing preloads using shims. Special tools are required for tasks like installing dual-cone seals.
This document provides instructions for disassembling and assembling the final drive of a 330D2 excavator. The disassembly process involves using various tools to remove 37 individual parts from the final drive assembly. The assembly process similarly uses tools to reinstall the parts in the reverse order, ensuring proper installation of seals and adjusting bearing preload through precise shimming.
The document provides step-by-step instructions for disassembling the final drive of a 329DL excavator. It begins by removing the final drive assembly and placing it on a repair stand. Key steps include removing the cover, gears, shafts, carriers, and planetary gears. Tools needed are listed. Detailed illustrations accompany each step to show how to remove each component. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Caterpillar cat 325 d l excavator (prefix nac) service repair manual (nac0000...fjsekdmmeed
This document provides repair instructions for a 325D L excavator transmission. It outlines 33 steps to disassemble and reassemble the transmission components. Key parts include the main housing, motor housing, bearings, seals, gears, carriers, plugs, and cover. The instructions emphasize cleanliness and applying anti-seize compound to parts during assembly. Precise measurements and shimming are required to set bearing preload.
Caterpillar cat 324 d l excavator (prefix tsn) service repair manual (tsn0000...jfksekmmdme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D and 324D L. The disassembly procedure involves 28 steps to remove components from the travel motor housing, including the head, port plate, bearings, brake piston, plates, springs, and seals. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of marked components.
Caterpillar cat 374 d l excavator (prefix pas) service repair manual (pas0000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 374D L excavator. It lists the required tools and presents 33 steps for disassembly, removing all internal components. It then outlines 37 steps for reassembly, starting with cleaning and inspecting parts, and continuing through installing bearings, seals, gears, and housing components in the reverse order of disassembly. Tolerances and special installation tools are specified to ensure proper bearing preload and sealing.
Caterpillar cat m318 c wheeled excavator (prefix bcz) service repair manual (...udfjjdjkkmds
This document provides instructions for separating the upper frame and undercarriage frame on an M318C wheeled excavator. It lists the required tools which include electric hydraulic pumps, cylinders, stands, pins, tubes, collars, saddles, links and guide bolts. The procedure involves using the listed tools and hydraulic jacks to lift and support the frames while removing connecting components. Proper containment of fluids is noted as important during the separation process.
Caterpillar cat 330 d fm excavator (prefix e4k) service repair manual (e4k000...hhjsekmdmm
This document provides disassembly instructions for the final drive of a 330D FM excavator. It lists over 40 steps to completely disassemble the final drive and its components. This includes removing the travel motor, draining fluids, removing sprockets, planetary gear assemblies, carrier assemblies, discs, plates, springs, and other parts. Detailed illustrations are provided to identify each component. Required tools are listed and safety notices explained.
Caterpillar cat 312 c l excavator (prefix cbt) service repair manual (cbt0000...fksjksmmde
The document provides instructions for disassembling and assembling the swing drive of a 312C excavator. It describes removing over 20 individual parts in multiple steps to fully disassemble the swing drive. These parts include gears, shafts, bearings, seals, and housings. The assembly section then lists the parts and tools needed and describes the reverse process of installing the components in the proper order and applying sealants or fasteners as needed.
The document provides instructions for disassembling a final drive assembly in 3 steps:
1. Remove the final drive assembly and disassemble it by removing the cover, gears, carrier assembly, planetary gears, and ring gear.
2. Disassemble the planetary carrier by removing the planetary shafts, washers, and gears.
3. Remove the ring gear from the sprocket housing and disassemble the motor housing by removing coupling gear, shims, and seals.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...jfdjskmdmme
This document provides disassembly instructions for a final drive on excavator models 330D and 330D L. The procedure involves removing 32 components in 31 steps, starting with removing the final drive and travel motor. Key steps include removing planetary gear assemblies weighing 38-48 kg each using lifting tools, and disassembling the gear assemblies by pressing out shafts and removing retaining rings, washers, gears and bearings. The entire disassembled final drive assembly weighs approximately 550 kg.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...jfdjskmdmme
This document provides the disassembly procedure for a final drive on excavator models 330D and 330D L. It involves removing 32 components in 31 steps, including removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Special tools are required to remove components and many components are heavy, requiring two people or lifting devices to remove safely due to weights from 32 kg to 550 kg. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...hhjsekmdmm
This document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing over 30 individual parts in a specific sequence, including gears, shafts, bearings, seals, and housing components. Special tools are required to remove some parts, and safety notes emphasize cleanliness and using lifting devices due to component weights up to 550 kg. The overall process dismantles the final drive into its core sub-assemblies and parts.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...cdfzxs
This document provides the disassembly procedure for a final drive on excavator models 330D and 330D L. It involves removing over 30 individual parts in 31 numbered steps, including gears, shafts, bearings, seals, and housing components. Special tools are required to remove some parts, and safety notes emphasize cleanliness and using lifting devices due to component weights up to 550 kg. The procedure systematically breaks down the entire final drive assembly into its core components.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...cdsaas
This document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing 32 components in 31 steps, starting with removing the final drive and travel motor. Key steps include removing gears, carriers, shafts, seals and housings using various tools like link brackets, forcing bolts, and presses. Cleanliness is important to prevent dirt from entering mechanisms during disassembly.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...fjjsekkksmeik
This document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing 32 components in 31 steps, including removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, shafts, seals and housing. Special tools are required to remove some components and safety notes are provided about cleanliness and using lifting devices due to component weights up to 550kg.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...cdsaas
This document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing 32 components in 31 steps, including removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, shafts, seals and housings. Special tools are required and safety notes are provided about cleanliness and part weights, which range from 32 kg for the cover to 550 kg for the entire final drive assembly.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...fjjsekkksmeik
This document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing 32 components in 31 steps, including removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, shafts, seals and housings. Special tools are required and safety notes are provided about cleanliness and part weights, which range from 32 kg for the cover to 550 kg for the entire final drive assembly.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...cdfzxs
This document provides the disassembly procedure for a final drive on excavator models 330D and 330D L. It involves removing over 30 individual parts in 31 numbered steps, including gears, shafts, bearings, seals, and housing components. Special tools are required to remove some parts, and safety notes warn that some components are heavy and require multiple people to handle safely. The procedure is detailed and meticulous to ensure all parts are removed correctly.
Caterpillar Cat 330D L Excavator (Prefix ERN) Service Repair Manual (ERN00001...fujkse9didkke3
This document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Proper safety equipment and lifting devices are required due to the heavy weights involved, such as the 550 kg weight of the entire final drive assembly. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar Cat 330D L Excavator (Prefix ERN) Service Repair Manual (ERN00001...orrf0370383
This document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Proper safety equipment and lifting devices are required due to the heavy weights involved, such as the 550 kg weight of the entire final drive assembly. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar Cat 330D and 330D L Excavator (Prefix ERN) Service Repair Manual ...f8uejkdkdmm3e
This document provides disassembly instructions for a final drive on an excavator model 330D L. The procedure involves removing 32 components in 31 steps. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Safety notes emphasize cleanliness during disassembly and that some components weigh over 100 kg/220 lb and require two people to remove.
Caterpillar Cat 330D L Excavator (Prefix ERN) Service Repair Manual (ERN00001...dujkdksmdmdm
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive including removing covers, gears, carriers, shafts, seals and housings. Special tools are required including link brackets and forcing bolts to remove components due to their weight, with some parts weighing up to 550kg. Detailed illustrations accompany each step to show how to disassemble the various components.
Caterpillar Cat 330D L Excavator (Prefix ERN) Service Repair Manual (ERN00001...jdksmmdmdd
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive including removing covers, gears, carriers, shafts, seals and housings. Special tools are required including link brackets and forcing bolts to remove components due to their weight, with some parts weighing up to 550kg. Detailed illustrations accompany each step to show how to disassemble the various components.
Caterpillar Cat 330D and 330D L Excavator (Prefix ERN) Service Repair Manual ...f89siekkmdmm2w
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive including removing covers, gears, carriers, shafts, seals and housings. Special tools are required including link brackets and forcing bolts to remove components due to their weight, with some parts weighing up to 550kg. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar Cat 330D L Excavator (Prefix ERN) Service Repair Manual (ERN00001...fuusejkddmmd3e
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive including removing covers, gears, carriers, shafts, seals and housings. Special tools are required including link brackets and forcing bolts to remove components due to their weight, with some parts weighing up to 550kg. Detailed illustrations accompany each step to show how to disassemble the various components.
Caterpillar cat 324 d l excavator (prefix tsn) service repair manual (tsn0000...jfksekmmdme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D and 324D L. The disassembly procedure involves 28 steps to remove components from the travel motor housing, including the head, port plate, bearings, brake piston, plates, springs, and seals. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of marked components.
Caterpillar cat 374 d l excavator (prefix pas) service repair manual (pas0000...fjjskekdmme
This document provides instructions for disassembling and assembling the final drive of a 374D L excavator. It lists the required tools and presents 33 steps for disassembly, removing all internal components. It then outlines 37 steps for reassembly, starting with cleaning and inspecting parts, and continuing through installing bearings, seals, gears, and housing components in the reverse order of disassembly. Tolerances and special installation tools are specified to ensure proper bearing preload and sealing.
Caterpillar cat m318 c wheeled excavator (prefix bcz) service repair manual (...udfjjdjkkmds
This document provides instructions for separating the upper frame and undercarriage frame on an M318C wheeled excavator. It lists the required tools which include electric hydraulic pumps, cylinders, stands, pins, tubes, collars, saddles, links and guide bolts. The procedure involves using the listed tools and hydraulic jacks to lift and support the frames while removing connecting components. Proper containment of fluids is noted as important during the separation process.
Caterpillar cat 330 d fm excavator (prefix e4k) service repair manual (e4k000...hhjsekmdmm
This document provides disassembly instructions for the final drive of a 330D FM excavator. It lists over 40 steps to completely disassemble the final drive and its components. This includes removing the travel motor, draining fluids, removing sprockets, planetary gear assemblies, carrier assemblies, discs, plates, springs, and other parts. Detailed illustrations are provided to identify each component. Required tools are listed and safety notices explained.
Caterpillar cat 312 c l excavator (prefix cbt) service repair manual (cbt0000...fksjksmmde
The document provides instructions for disassembling and assembling the swing drive of a 312C excavator. It describes removing over 20 individual parts in multiple steps to fully disassemble the swing drive. These parts include gears, shafts, bearings, seals, and housings. The assembly section then lists the parts and tools needed and describes the reverse process of installing the components in the proper order and applying sealants or fasteners as needed.
The document provides instructions for disassembling a final drive assembly in 3 steps:
1. Remove the final drive assembly and disassemble it by removing the cover, gears, carrier assembly, planetary gears, and ring gear.
2. Disassemble the planetary carrier by removing the planetary shafts, washers, and gears.
3. Remove the ring gear from the sprocket housing and disassemble the motor housing by removing coupling gear, shims, and seals.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...jfdjskmdmme
This document provides disassembly instructions for a final drive on excavator models 330D and 330D L. The procedure involves removing 32 components in 31 steps, starting with removing the final drive and travel motor. Key steps include removing planetary gear assemblies weighing 38-48 kg each using lifting tools, and disassembling the gear assemblies by pressing out shafts and removing retaining rings, washers, gears and bearings. The entire disassembled final drive assembly weighs approximately 550 kg.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...jfdjskmdmme
This document provides the disassembly procedure for a final drive on excavator models 330D and 330D L. It involves removing 32 components in 31 steps, including removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Special tools are required to remove components and many components are heavy, requiring two people or lifting devices to remove safely due to weights from 32 kg to 550 kg. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...hhjsekmdmm
This document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing over 30 individual parts in a specific sequence, including gears, shafts, bearings, seals, and housing components. Special tools are required to remove some parts, and safety notes emphasize cleanliness and using lifting devices due to component weights up to 550 kg. The overall process dismantles the final drive into its core sub-assemblies and parts.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...cdfzxs
This document provides the disassembly procedure for a final drive on excavator models 330D and 330D L. It involves removing over 30 individual parts in 31 numbered steps, including gears, shafts, bearings, seals, and housing components. Special tools are required to remove some parts, and safety notes emphasize cleanliness and using lifting devices due to component weights up to 550 kg. The procedure systematically breaks down the entire final drive assembly into its core components.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...cdsaas
This document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing 32 components in 31 steps, starting with removing the final drive and travel motor. Key steps include removing gears, carriers, shafts, seals and housings using various tools like link brackets, forcing bolts, and presses. Cleanliness is important to prevent dirt from entering mechanisms during disassembly.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...fjjsekkksmeik
This document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing 32 components in 31 steps, including removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, shafts, seals and housing. Special tools are required to remove some components and safety notes are provided about cleanliness and using lifting devices due to component weights up to 550kg.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...cdsaas
This document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing 32 components in 31 steps, including removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, shafts, seals and housings. Special tools are required and safety notes are provided about cleanliness and part weights, which range from 32 kg for the cover to 550 kg for the entire final drive assembly.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...fjjsekkksmeik
This document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing 32 components in 31 steps, including removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, shafts, seals and housings. Special tools are required and safety notes are provided about cleanliness and part weights, which range from 32 kg for the cover to 550 kg for the entire final drive assembly.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...cdfzxs
This document provides the disassembly procedure for a final drive on excavator models 330D and 330D L. It involves removing over 30 individual parts in 31 numbered steps, including gears, shafts, bearings, seals, and housing components. Special tools are required to remove some parts, and safety notes warn that some components are heavy and require multiple people to handle safely. The procedure is detailed and meticulous to ensure all parts are removed correctly.
Caterpillar Cat 330D L Excavator (Prefix ERN) Service Repair Manual (ERN00001...fujkse9didkke3
This document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Proper safety equipment and lifting devices are required due to the heavy weights involved, such as the 550 kg weight of the entire final drive assembly. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar Cat 330D L Excavator (Prefix ERN) Service Repair Manual (ERN00001...orrf0370383
This document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Proper safety equipment and lifting devices are required due to the heavy weights involved, such as the 550 kg weight of the entire final drive assembly. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar Cat 330D and 330D L Excavator (Prefix ERN) Service Repair Manual ...f8uejkdkdmm3e
This document provides disassembly instructions for a final drive on an excavator model 330D L. The procedure involves removing 32 components in 31 steps. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Safety notes emphasize cleanliness during disassembly and that some components weigh over 100 kg/220 lb and require two people to remove.
Caterpillar Cat 330D L Excavator (Prefix ERN) Service Repair Manual (ERN00001...dujkdksmdmdm
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive including removing covers, gears, carriers, shafts, seals and housings. Special tools are required including link brackets and forcing bolts to remove components due to their weight, with some parts weighing up to 550kg. Detailed illustrations accompany each step to show how to disassemble the various components.
Caterpillar Cat 330D L Excavator (Prefix ERN) Service Repair Manual (ERN00001...jdksmmdmdd
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive including removing covers, gears, carriers, shafts, seals and housings. Special tools are required including link brackets and forcing bolts to remove components due to their weight, with some parts weighing up to 550kg. Detailed illustrations accompany each step to show how to disassemble the various components.
Caterpillar Cat 330D and 330D L Excavator (Prefix ERN) Service Repair Manual ...f89siekkmdmm2w
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive including removing covers, gears, carriers, shafts, seals and housings. Special tools are required including link brackets and forcing bolts to remove components due to their weight, with some parts weighing up to 550kg. Cleanliness is important during disassembly to prevent dirt from entering internal mechanisms.
Caterpillar Cat 330D L Excavator (Prefix ERN) Service Repair Manual (ERN00001...fuusejkddmmd3e
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive including removing covers, gears, carriers, shafts, seals and housings. Special tools are required including link brackets and forcing bolts to remove components due to their weight, with some parts weighing up to 550kg. Detailed illustrations accompany each step to show how to disassemble the various components.
Caterpillar cat 330 d l excavator (prefix ern) service repair manual (ern0000...diskdkkdmmd
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive including removing covers, gears, carriers, shafts, seals and housings. Special tools are required including link brackets and forcing bolts to remove components due to their weight, with some parts weighing up to 550kg. Detailed illustrations accompany each step to show how to disassemble the various components.
This document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Proper safety equipment and lifting devices are required due to the heavy weights involved, such as the 550 kg weight of the entire final drive assembly. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar cat 330 d excavator (prefix ern) service repair manual (ern00001 ...diskdkkdmmd
This document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive. Key steps include removing the final drive cover, gears, carrier assemblies, planetary gear assemblies, and ring gear. Proper safety equipment and lifting devices are required due to the heavy weights involved, such as the 550 kg total weight of the entire final drive assembly. Cleanliness is important to prevent dirt from entering during disassembly.
Caterpillar Cat 330D and 330D L Excavator (Prefix ERN) Service Repair Manual ...yin9niaojiao
The document provides disassembly instructions for a final drive on an excavator model 330D L. It outlines 32 steps to fully disassemble the final drive including removing covers, gears, carriers, shafts, seals and housings. Special tools are required including link brackets and forcing bolts to remove components due to their weight, with some parts weighing up to 550kg. Detailed illustrations accompany each step to show how to disassemble the various components.
Similar to Caterpillar cat 330 d l excavator (prefix jlp) service repair manual (jlp00001 and up) (20)
Caterpillar cat m315 c wheeled excavator (prefix h2b) service repair manual (...cdsaas
The document provides instructions for disassembling the piston pump (swing) of an M315C wheeled excavator. It describes removing 22 individual parts from the pump housing including the servo valve, charge pump, gears, head, port plate, relief valves, spool, and adjustment screw. Cleanliness is important when disassembling to prevent dirt from entering the internal mechanisms. Personal injury precautions are also noted regarding hydraulic pressure and spring force.
Caterpillar cat m315 c wheeled excavator (prefix bdm) service repair manual (...cdsaas
This document provides instructions for disassembling and assembling the main hydraulic pump of a M315C wheeled excavator. It lists 42 steps to disassemble the pump by removing components like valves, springs, seals, pistons, and bearings. It then lists the assembly steps in reverse order, noting to clean parts and apply new thread lock before reinstalling components. Precautions are provided to mark parts for orientation and contain fluids during maintenance.
Caterpillar cat 330 d2 l excavator (prefix xdr) service repair manual (xdr000...cdsaas
The document provides instructions for installing and removing an engine oil pump, water pump, and water temperature regulator on a Caterpillar 330D2 excavator. The oil pump installation involves cleaning components, installing various parts in sequence using specific tools and torques. The water pump removal requires draining coolant and removing hoses and bolts. Its installation aligns parts using guide studs and torques bolts in a given order. Removing the temperature regulator involves draining coolant and disconnecting hoses.
Caterpillar cat 330 d2 l excavator (prefix hsp) service repair manual (hsp000...cdsaas
The document provides instructions for disassembling a 330D2 excavator travel motor. It is a 27 step process that includes removing the head, brake piston, barrel assembly, cam plate, shaft assembly, and other internal components. Special tools are required and components must be marked for proper reassembly in the correct positions. Safety precautions are outlined to contain fluids and handle components carefully.
Caterpillar cat 330 d2 l excavator (prefix her) service repair manual (her000...cdsaas
This document provides instructions for disassembling and assembling the final drive of a 330D2 excavator. The disassembly process involves 37 steps to remove all components of the final drive. Key steps include removing the final drive cover, gears, carrier assembly, planetary gears, and sprocket housing. The assembly process has 35 steps and involves installing components in reverse order while applying anti-seize compound and ensuring proper bearing preload using shims.
Caterpillar cat 330 d2 l excavator (prefix fex) service repair manual (fex000...cdsaas
The document provides instructions for disassembling a 330D2 excavator final drive. It involves 33 steps including removing the final drive cover, carrier assembly, planetary gears, ring gears, and other components. Various tools are required including link brackets, eyebolts, retaining ring pliers, and a transmission repair stand to support components of significant weight during disassembly. Cleanliness is emphasized to prevent dirt from entering internal mechanisms.
Caterpillar cat 330 d2 l excavator (prefix ex7) service repair manual (ex7000...cdsaas
The document provides step-by-step instructions for disassembling and assembling a travel motor. It lists 28 steps for disassembly, removing components like the head, port plate, bearings, brake piston, plates, and seals. It then lists 16 steps for assembly, replacing components in reverse order and noting specifics like lubrication, alignment marks, and press fittings. Precise installation of keys and cam plates is emphasized to prevent damage.
Caterpillar cat 330 d2 l excavator (prefix ebp) service repair manual (ebp000...cdsaas
The document provides instructions for disassembling an excavator travel motor. It begins by having the technician remove the travel motor from the excavator. The disassembly procedure then consists of 27 steps to dismantle the various components of the travel motor, including removing the head, brake piston, barrel assembly, cam plate, and other internal parts. Precautions are provided to properly contain fluids and mark components for reassembly. Required tools are also listed.
Caterpillar cat 330 d2 l excavator (prefix dtg) service repair manual (dtg000...cdsaas
The document provides instructions for disassembling a 330D2 excavator travel motor. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head, brake piston, barrel assembly, cam plate, and shaft assembly. Tools required for the disassembly include an adapter, bolts, washers, eyebolt, retaining ring pliers, bearing puller, and shop air. Safety precautions are noted, such as containing fluids and avoiding damage to component surfaces.
The document provides instructions for installing and removing an engine oil pump, water pump, and water temperature regulator on a Caterpillar 330D2 excavator. The oil pump installation involves cleaning components, installing various parts in sequence using specific tools and torques. The water pump removal requires draining coolant and removing hoses and bolts. Its installation aligns parts using guide studs and torques bolts in a given order. Removing the temperature regulator involves draining coolant and disconnecting hoses.
The document provides instructions for disassembling a 330D2 excavator travel motor. The 27 step procedure includes removing the head, brake piston, barrel assembly, cam plate, shaft assembly, seals and other components. Special tools are required and technicians are advised to take care to not damage components and contain fluids.
This document provides instructions for disassembling and assembling the final drive of a 330D2 excavator. The disassembly process involves 37 steps to remove all components of the final drive. Key steps include removing the final drive cover, gears, carrier assembly, planetary gears, and sprocket housing. The assembly process has 35 steps and involves installing components in reverse order while applying anti-seize compound and ensuring proper bearing preload using shims.
The document provides instructions for disassembling a 330D2 excavator final drive. It involves 33 steps including removing the final drive cover, carrier assembly, planetary gears, ring gears, and other components. Various specialized tools are required to disassemble parts and subassemblies. Cleanliness is important to prevent dirt from entering during disassembly.
The document provides step-by-step instructions for disassembling and assembling a travel motor. It lists 28 steps for disassembly, removing components like the head, port plate, bearings, brake piston, plates, and seals. It then lists 16 steps for assembly, replacing components in reverse order and noting specifics like lubrication, alignment marks, and press fittings. Precise installation of keys and cam plates is emphasized to prevent damage.
The document provides instructions for disassembling an excavator travel motor. It begins by having the technician remove the travel motor from the excavator. The disassembly procedure then consists of 27 steps to dismantle the various components of the travel motor, including removing the head, brake piston, barrel assembly, cam plate, and other internal parts. Precautions are provided to properly contain fluids and mark components for reassembly. Required tools are also listed.
The document provides instructions for disassembling a 330D2 excavator travel motor. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head, brake piston, barrel assembly, cam plate, and shaft assembly. Tools required for the disassembly include an adapter, bolts, washers, eyebolt, retaining ring pliers, bearing puller, and shop air. Safety precautions are noted, such as containing fluids and avoiding damage to component surfaces.
Caterpillar cat 330 d l mobile hydraulic excavator (prefix h3d) service repai...cdsaas
This document provides instructions for removing and installing rear gear group components on a 330D L excavator powered by a C9 engine. The removal process involves using tools to remove retaining bolts and gears. Bearings are removed from adapters using tools as well. Clearances must be checked when installing new bearings. The installation process specifies torques for bolts and using loctite on reused bolts. Dimensions must be matched for bearing installation.
Caterpillar cat 330 d l excavator (prefix thj) service repair manual (thj0000...cdsaas
The document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing 32 components in 31 steps, starting with removing the final drive and travel motor. Key steps include removing gears, carriers, shafts, seals and housings using various tools like brackets, presses, and hammers/punches. Cleanliness is important to prevent dirt entry during disassembly.
Caterpillar cat 330 d l excavator (prefix r2d) service repair manual (r2d0000...cdsaas
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a Caterpillar 330D L excavator with a C9 engine. The summary is:
The rear gear group removal procedure involves using tools to remove retaining bolts, bushings, adapters, bearings, gears and covers. Cleanliness is important to prevent contamination. The installation procedure specifies matching angles and distances when pressing bearings in place and lubricating bolts during reinstallation.
The flywheel removal involves using guide studs and lifting equipment due to the flywheel's weight. Removal of the ring gear may require a hammer and punch. Installation specifies heating the ring gear for pressing, applying thread
Caterpillar cat 330 d l excavator (prefix nbd) service repair manual (nbd0000...cdsaas
The document provides disassembly instructions for a final drive on an excavator model 330D L. It involves removing 32 components in 31 steps, starting with removing the final drive and travel motor. Key steps include removing gears, shafts, seals, and housing components using various tools while noting weights of parts removed. Detailed illustrations are provided for each step. Cleanliness is important to prevent dirt entry during disassembly.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
Kalyan chart DP boss guessing matka results➑➌➋➑➒➎➑➑➊➍
8328958814Satta Matka is a number-based game. There are several markets, each with its owner responsible for releasing the lottery satta Matka market results on time. Kalyan market, Worli market, main Mumbai market, Rajdhani market, and Milan market are some of the main markets or bazaars involved in the satta Matka game. The oldest and most legitimate markets are in Kalyan and Main Mumbai. Every Satta Market has an open and close time. The satta results for these markets are published on or shortly after the open and close times. During the open result, two numbers are decoded, one of which is a three-digit number and the other a single-digit number. Similarly, three-digit and single-digit numbers are declared during the satta market's close. The last digit after adding the three digits of the open or close result is usually the single digit declared during the open and close results.KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAINSATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSSdp boss net, dp satta, dpboss dpboss, indian satta matka, kalyan matkà result today , matka boss, matka result live, matka satta result today, satamatka com, satta boss, satta matka king, sattamatkà, sattamatkà result, sattamatta com, sattmatka sattmatka, star matka, tara matka, tara satta matka, worli matka, indian matka, matka live, kalyan guessing, satta fix, kalyan final ank, dp matka, dpboss net, sata mata com, सट्टा मटका, sattamatkà 143, golden matka, satta matta matka 143, satta fast, kalyan open, satta 143, dpboss 143 guessing, dpboss satta, golden satta matka, satta bajar
Satta Matka Market is India's leading website providing the quickest sattamatka outcome, experienced in Satta Matka game. Our services include free Satta Matka Trick and Tips for Kalyan Matka and Disawar Satta King, as well as satta matka graphs, online play, tips and more. Our team of experts strive to help you recoup your losses quickly through our proposals such as Free Satta Matka Tips and Kalyan Bazar Tips. We are known as India's best Matka DpBoss portal site, here to deliver updates on all sorts of Satta Market like Kalyan Bazar, Milan, Rajdhani, Time Bazaar, Main and the most current charts. Stay tuned with us for more live updates on the Satta market
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
2. Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D 208-6033 Spanner Socket 1
E 138-7574 Link Bracket 2
F
5F-7366 Forcing Screw 1
1P-5546 Crossblock 1
1U-9889 Crossblock 1
1P-0520 Driver Group 1
6V-7888 Puller Leg 2
1H-3112 Puller Assembly 1
1P-5551 Adjustable Screw Assembly 1
G
1U-7600 Slide Hammer Puller Gp 1
8T-0266 Bolt 1
Start By:
A. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the thoroughly
clean the exterior of the component. This will prevent dirt from entering the internal
mechanism.
Note: Some of the images that are in this procedure do not show the sprocket assembly that
is attached to the final drive housing. If necessary, the weights that are given include the
weight of the sprocket assembly.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the part's original locations.
2/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. Illustration 1 g00708089
2. Fasten the final drive to Tooling (A) , as shown. The weight of the final drive assembly is
approximately 312 kg (688 lb).
3. Remove bolts (1) and the washers that hold the cover in position.
Illustration 2 g00708090
4. Remove the setscrews from the cover. Fasten Tooling (B) and a suitable lifting device to
cover (2) , as shown. Remove the cover. The weight of the cover is approximately 32 kg (70
lb).
3/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
4. Illustration 3 g00879362
5. Remove bolts (3) . Remove gear (5) . Check plate (6) . Replace plate (6) if wear is shown.
Remove plugs (4) from cover (2) .
Illustration 4 g00879365
6. Remove O-ring seal (7) from plugs (4) .
Illustration 5 g00780428
4/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
5. 7. Remove gear (8) . Remove spacer (9) .
Illustration 6 g00780432
8. Remove retaining ring (10) with Tooling (C) . Remove washer (11) . Remove gear (12) .
Remove bearing assembly (13) . Remove second washer (11) .
9. Repeat Step 8 for the remaining two gear assemblies.
Illustration 7 g00781401
10. Remove retaining ring (14) .
5/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
6. Illustration 8 g00781407
11. Remove carrier assembly (15) .
Illustration 9 g01389593
12. Use a suitable press in order to remove the shafts from carrier assembly (15) .
6/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
8. 16. Disassemble carrier assembly (19) , as follows.
a. Drive spring pin (20) into planetary shaft (21) with a hammer and a punch.
Illustration 13 g00781476
b. Remove planetary shaft (21) .
c. Remove spring pin (20) from planetary shaft (21) with a hammer and a punch.
Illustration 14 g00781516
d. Remove thrust washers (22) and planetary gear (24) from the carrier assembly.
e. Remove bearing (23) from planetary gear (24) .
17. Repeat Steps 16.a through 16.e for the other two planetary.
8/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
9. Illustration 15 g00781529
18. Remove gear (25) . Remove spacer (26) .
Illustration 16 g00781559
19. Remove carrier assembly (27) .
20. Use two people to remove carrier assembly (27) . The weight of the carrier assembly is
approximately 38 kg (85 lb).
21. Disassemble carrier assembly (27) , as follows.
9/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
10. Illustration 17 g00781719
a. Drive spring pin (29) into planetary shaft (28) with a hammer and a punch.
Illustration 18 g00781601
b. Remove planetary shaft (28) .
c. Remove spring pin (29) from planetary shaft (28) with a hammer and a punch.
Illustration 19 g00781607
d. Remove thrust washers (30) and planetary gear (32) from the carrier assembly.
e. Remove two bearings (31) from the planetary gear.
22. Repeat Steps 21.a through 21.e for the other two planetary gears.
10/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. Illustration 20 g00781730
23. Use two people to remove gear (33) . The weight of gear is approximately 41 kg (90 lb).
Illustration 21 g00781807
24. Remove O-ring seal (34) .
Illustration 22 g01147650
25. Remove bolts (35A) and plates (35B) .
11/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. Illustration 23 g01147651
26. Use Tooling (G) to remove dowel (37) from stopper plate (35) .
Illustration 24 g01147759
27. Secure Tooling (D) to stopper plate (35) . Use Tooling (D) to remove stopper plate (35) .
12/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
13. Illustration 25 g01147930
28. Use Tooling (E) and a suitable lifting device to remove housing (36) . The weight of
housing (36) is approximately 100 kg (220 lb).
Illustration 26 g01147951
29. Remove Duo-Cone seal (39A) from housing (38) .
Illustration 27 g01147975
13/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. Illustration 28 g01147934
30. Remove Duo-Cone seal (39B) from housing (36) .
31. Use Tooling (F) in order to remove bearings (40) and (41) from housing (36) .
32. If necessary, remove the final drive sprocket from the sprocket housing. Refer to
Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Aug 11 13:27:27 UTC+0800 2020
14/14(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 330D L EXCAVATOR JLP
Configuration: 330D L Excavators JLP00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i06252413
Final Drive - Disassemble - Type-Two
SMCS - 4050-015
S/N - B6H568-UP
S/N - DTS1-UP
S/N - EAH1-UP
S/N - EDX1-UP
S/N - EFT1-UP
S/N - ERN275-UP
S/N - FAR1-UP
S/N - FFK1-UP
S/N - GGE1-UP
S/N - GGH1-UP
S/N - HHK1-UP
S/N - J2F1-UP
S/N - JBT1-UP
S/N - JLP299-UP
S/N - JTN1-UP
S/N - JWR1-UP
1/19(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. S/N - XBH1-UP
S/N - YCF1-UP
S/N - ZCT1-UP
S/N - ZML1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description QTY
A 439-3940 Link Brackets 3
B 439-3939 Link Bracket 2
C 154-6183 Forcing Bolts 3
Start By:
A. Remove the final drive and the travel motor.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the original locations.
Illustration 1 g02151790
Note: The weight of the entire final drive assembly is approximately 550 kg (1200 lb).
2. Attach Tooling (A) and a suitable lifting device to cover (2) . The weight of cover (2) is
approximately 32 kg (70 lb). Remove bolts (1) and cover (2) .
3/19(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
18. Illustration 2 g00879362
3. Remove bolts (3) . Remove gear (5) . Remove plate (6) . Remove plugs (4) from cover (2) .
Illustration 3 g00879365
4. Remove O-ring seal (7) from plugs (4) .
4/19(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. Illustration 4 g02151806
5. Remove sun gear (8) , spacer (9) , and planetary gear assembly (10) .
Illustration 5 g02151809
6. Remove retaining ring (11) , washer (12) , planetary gear (13) , roller bearing (15) , and
washer (16) from carrier assembly (17) .
7. Repeat Step 6 for the remaining two gear assemblies.
8. Remove retaining ring (14) and sun gear (18) from carrier assembly (17) .
5/19(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
20. Illustration 6 g02152150
9. Use a suitable press to remove the shafts from carrier assembly (17) .
Illustration 7 g02151813
10. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (19) . The
weight of planetary gear assembly (19) is approximately 48 kg (105 lb). Remove planetary
gear assembly (19) .
11. Remove spacer (20) .
6/19(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
21. Illustration 8 g02151782
12. Drive spring pin (21) into planetary shaft (22) with a suitable hammer and a suitable punch.
13. Remove planetary shaft (22) , washer (24) , roller bearing (25) , planetary gear (26) , and
washer (27) from the planetary gear assembly (19) .
14. Remove spring pin (21) from planetary shaft (22) with a suitable hammer and a suitable
punch.
15. Remove retaining ring (23) and sun gear (28) from planetary gear assembly (19) .
Illustration 9 g02152208
7/19(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
22. 16. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (29) . The
weight of planetary gear assembly (29) is approximately 38 kg (85 lb). Remove planetary
gear assembly (29) .
Illustration 10 g02152467
17. Drive spring pin (30) into planetary shaft (31) with a suitable hammer and a suitable punch.
18. Remove planetary shaft (31) , washer (32) , roller bearings (33) , planetary gear (34) , and
washer (35) from the planetary gear assembly (29) .
19. Remove spring pin (30) from planetary shaft (31) with a suitable hammer and a suitable
punch.
8/19(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Illustration 11 g02152399
20. Attach Tooling (A) and a suitable lifting device to ring gear (36) . The weight of ring gear
(36) is approximately 66 kg (146 lb). Remove ring gear (36) .
21. Remove O-ring seal (37) from sprocket housing (38) .
Illustration 12 g02152525
Illustration 13 g02152528
Note: Mark the orientation of coupling gear (40) for assembly purposes.
22. Remove bolts (39) from coupling gear (40) . Use Tooling (C) in order to remove coupling
gear (40) from the motor housing.
9/19(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
25. Illustration 14 g02152546
23. Remove shims (41) from the motor housing.
Illustration 15 g02152552
Note: Upper bearing cone (42) and lower bearing cone (43) are a slip fit on the motor
housing. While you remove sprocket housing (38) from the motor housing, upper bearing
cone (42) may stay with the sprocket housing, or upper bearing cone (42) may stay on the
motor housing.
24. Attach Tooling (B) and a suitable lifting device to sprocket housing (38) . The weight of
sprocket housing (38) is approximately 109 kg (240 lb). Remove sprocket housing (38) and
upper bearing cone (42) .
10/19(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
26. Illustration 16 g02152595
25. Remove dowels (45) from the motor housing.
26. Remove Duo-Cone seal (44) from the motor housing.
27. If lower bearing cone (43) remained on the motor housing, then remove the lower bearing
cone.
Illustration 17 g02152598
28. Remove Duo-Cone seal (46) from the sprocket housing.
29. If upper bearing cone (42) remained on the sprocket housing, then remove the upper bearing
cone.
30. Remove the bearing cups from the sprocket housing.
(Type 1) Disassembly Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
11/19(W)
w
2020/8/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...