The Reconnect California Grant Program, funded by the California Energy Commission and ClipperCreek, is upgrading existing publicly available EV charging stations to the new SAE J1772 standard. The program is providing free upgrades to the ClipperCreek CS-40 charger and pedestals to replace outdated EVSEs at over 100 sites statewide. By upgrading over 130 legacy chargers so far, it is one of the largest EV infrastructure programs in California helping the transition to universal EV charging.
Includes PEV best practices from various cities and states from Canada, the US and California. Also includes the results of the PEV readiness survey given to regional municipal staff.
The San Joaquin Valley PEV readiness assessment is designed to enhance local PEV planning efforts by evaluating the current state of PEV readiness and identifying potential areas of improvement as well as tangible best practices developed throughout the San Joaquin Valley, California and abroad.
Includes PEV best practices from various cities and states from Canada, the US and California. Also includes the results of the PEV readiness survey given to regional municipal staff.
Matthew Porrecca, Associate Principal, BNIM Architecture
Revitalizing Communities By Design
Regenerative design and development could be incredibly simple. It merely requires taking time in a place to uncover stories, discover patterns, find essence, and then add value in any way that improves the capacity of a place to be whole, vital and evolving. Together with our clients and collaborators, we are taking steps to maximize social health, invigorate a sustainable economy and restore natural systems. This workshop explores essential questions that hold the keys to a broad-based shift toward regenerative practice. We’ll share our observations, process, projects, and metrics while drawing participants into a rich dialog of discovery.
Howard Blackson - Placemakers, LLC
In the 20th century, we have spent a lot of money and resources to build cultural wastelands that adversely affects our quality-of-life. With the demise of redevelopment in California, in conjunction with the demonization of Smart Growth, the future relevancy of these places rests upon our ability repurpose these miles and miles of regrettable and devalued strip centers, office parks, and housing tracks. Unfortunately, most citizens oppose any new development due to its potential conflict with their existing community character. Applying an urban design technique that purposely codes for a specific community character, this presentation will outline 21st century urban design tools to build towards walkable, mixed-use neighborhood centers.
With 20 plus years of professional urban design experience, Howard is the Director of Planning for PlaceMakers, LLC, a new economy company of seven (7) principals located across the United States and Canada. Howard has designed and managed a variety of projects both internationally and in the United States having worked in Asia, Europe and North America. He holds a Master degree in Urban Design from the University of Westminster, London, and a Bachelor degree in Geography from the University of Texas at Austin. Howard is an Accredited Member of the Congress for the New Urbanism and is a member of the U.S. General Services Administration Design Excellence Peer Review Committee. He is an adjunct lecturer at San Diego’s NewSchool of Architecture and Design and on the faculty of University of California San Diego Urban Studies Program.
Kaid Benfield, Dir. Sustainable Communities - NRDC
Kaid will discuss the opportunities and advantages of creating a sustainable energy future.We once thought of cities as the antithesis of sustainability - but we now know that cities can be the solution to, not the cause of, our environmental threats. To take advantage of the opportunities before us in an increasingly urban society, we must be thoughtful, shaping our metropolitan regions to reduce our environmental footprint while creating beautiful, green, inclusive neighborhoods within them. As people concerned about the health and future of the planet, we must approach this task with energy and humility, paying every bit as much attention to nurturing great people habit as we do to conserving the habitats of other species.
Includes PEV best practices from various cities and states from Canada, the US and California. Also includes the results of the PEV readiness survey given to regional municipal staff.
The San Joaquin Valley PEV readiness assessment is designed to enhance local PEV planning efforts by evaluating the current state of PEV readiness and identifying potential areas of improvement as well as tangible best practices developed throughout the San Joaquin Valley, California and abroad.
Includes PEV best practices from various cities and states from Canada, the US and California. Also includes the results of the PEV readiness survey given to regional municipal staff.
Matthew Porrecca, Associate Principal, BNIM Architecture
Revitalizing Communities By Design
Regenerative design and development could be incredibly simple. It merely requires taking time in a place to uncover stories, discover patterns, find essence, and then add value in any way that improves the capacity of a place to be whole, vital and evolving. Together with our clients and collaborators, we are taking steps to maximize social health, invigorate a sustainable economy and restore natural systems. This workshop explores essential questions that hold the keys to a broad-based shift toward regenerative practice. We’ll share our observations, process, projects, and metrics while drawing participants into a rich dialog of discovery.
Howard Blackson - Placemakers, LLC
In the 20th century, we have spent a lot of money and resources to build cultural wastelands that adversely affects our quality-of-life. With the demise of redevelopment in California, in conjunction with the demonization of Smart Growth, the future relevancy of these places rests upon our ability repurpose these miles and miles of regrettable and devalued strip centers, office parks, and housing tracks. Unfortunately, most citizens oppose any new development due to its potential conflict with their existing community character. Applying an urban design technique that purposely codes for a specific community character, this presentation will outline 21st century urban design tools to build towards walkable, mixed-use neighborhood centers.
With 20 plus years of professional urban design experience, Howard is the Director of Planning for PlaceMakers, LLC, a new economy company of seven (7) principals located across the United States and Canada. Howard has designed and managed a variety of projects both internationally and in the United States having worked in Asia, Europe and North America. He holds a Master degree in Urban Design from the University of Westminster, London, and a Bachelor degree in Geography from the University of Texas at Austin. Howard is an Accredited Member of the Congress for the New Urbanism and is a member of the U.S. General Services Administration Design Excellence Peer Review Committee. He is an adjunct lecturer at San Diego’s NewSchool of Architecture and Design and on the faculty of University of California San Diego Urban Studies Program.
Kaid Benfield, Dir. Sustainable Communities - NRDC
Kaid will discuss the opportunities and advantages of creating a sustainable energy future.We once thought of cities as the antithesis of sustainability - but we now know that cities can be the solution to, not the cause of, our environmental threats. To take advantage of the opportunities before us in an increasingly urban society, we must be thoughtful, shaping our metropolitan regions to reduce our environmental footprint while creating beautiful, green, inclusive neighborhoods within them. As people concerned about the health and future of the planet, we must approach this task with energy and humility, paying every bit as much attention to nurturing great people habit as we do to conserving the habitats of other species.
Michelle Kaufmann will talk about a quest for simplicity as a core component to a mission of making thoughtful, sustainable design accessible.
She will talk about her work in prefabrication, design-build, green homes and sustainable communities. Rethinking not only what we make and how we make it, but also redesigning the design process itself is key to the future of architecture and sustainability. Innovations in this category are abundant and exciting, and with strategic focus can help us all to have more quality, less clutter and simpler lives.
The upcoming 2013 Title-24 Building Efficiency Standards were approved by the California Energy Commission on May 9, 2012. The new Title-24 energy code incorporates significant changes that will affect architects, builders, contractors, energy consultants, and solar PV installers. This class will review the upcoming changes to the energy code and the impact on building design along with compliance strategies that will allow you to comply with the new, stricter energy code cost effectively.
Mark Madison is a Certified Energy Plans Examiner, Certified Energy Analyst, HERS rater, and serves on the board of directors of the California Association of Building Energy Analysts (CABEC).
We will discuss some strategies for incorporating water harvesting into sustainable landscaping, using example projects to illustrate our points. We will focus on residential systems for outdoor usage but will also touch on commercial applications and non-potable indoor use.
Many building owners have the desire to upgrade their commercial
properties, but in the current state of the economy they are at a loss as to how to financial such upgrades. The presentation will also review current trends in rebates, public sector financing and private sector financing that make such upgrades possible.
Target Audience:
I think the target audience for this presentation will be building industry
professionals, developers, building owners, property managers and
commercial real estate brokers, as well as educators from real estate
development programs such as San Diego State’s.
How the people of a small town on the cross road to the silk road in Persia used micro-climate and their local materials to create energy-efficient buildings.
- Assess how they have used sun, wind and water
- Passive solar design
- Landscape and thermal mass to transform a harsh natural environment into comfortable spaces
- Evaluate innovative uses of local material in their buildings
- Santa Fe architecture and similarities to Persian architecture
- Observe the use of these techniques in modern architecture
Storm windows, insulating shades, sash replacements, awnings - The good news is that we have so many ways to improve the performance of our windows. The bad news is...there are so many ways to improve the performance of our windows! How in the world can we objectively compare them on price, thermal performance, ease of installation, ease of use, solar control, privacy, and durability?
Lawrence Berkeley National Laboratories and BuildingGreen are working on simple and easy-to-use resources for selecting window retrofit options. With input on climate, existing window attributes, and performance priorities, anyone can cut through the difficulties of deciding how to improve the overall performance of existing windows.
Using resources from www.windowattachments.org, webinar participants will work through window attachment selection scenarios with the instructor and learn how to use these resources with their clients and on their own projects.
The new 2008 Title-24 Building Efficiency Standards became effective January 1, 2010. One of the most sweeping changes involve residential indoor and outdoor lighting requirements, particularly kitchen lighting and the new adoption of ASHRAE 62.2 indoor air quality code.
Kitchen Lighting, Title-24
New restrictions, control requirements, high efficacy fixture requirements and incandescent allowances, and interior lighting worksheets will add an additional layer of complexity to residential lighting design. This class will bring you up to speed on the new changes and address the underlying principles, calculation methods, strategies to assist you in complying with the new code changes and take you step by step thru the new CF-6R-LTG-1 lighting certificate of installation which must be filled out before the final certificate of occupancy will be issued.
Kitchen Lighting, Title-24
You will also understand which fixtures will comply as high efficacy (not all LED fixtures are certified as high efficacy), the lighting control requirements for each room type and the new fixture and control requirements for residential outdoor lighting.
Title-24, Title-24
California has now adopted the requirements of ASHRAE 62.2-2007 which means that starting January 1, 2010, all low-rise residential buildings are required to install whole house mechanical ventilation and satisfy other requirements to achieve acceptable indoor air quality. Openable windows will no longer be an acceptable method for satisfying outdoor air requirements. This will involve calculations for determining the minimum ventilation cfm and designing a system to provide the necessary airflow with proper controls. You will learn the proper method for determining ventilation airflow, strategies for designing a cost effective ventilation system, and how to fill out the new ventilation Certificate of Installation.
Kitchen Lighting, Title-24
Learn from one of the leading experts in California’s Title-24 Building Efficiency Standards (Title-24), Mark Madison, a state certified Energy Plans Examiner and Certified Energy Analyst, HERS rater, Greenpoint rater with over 25 years experience with building energy code compliance analysis, enforcement and training.
Learn why sustainable real estate has become such a popular choice for individual and institutional investors. See what's driving the market and learn how you can leverage this opportunity in your business.
This beginning level seminar is designed for non-residential building owners/managers/consultants and real estate professionals who want to track and understand their building’s energy usage using a free online tool called ENERGY STAR Portfolio Manager. Learn how the Environmental Protection Agency (EPA) benchmarking tool can guide investment priorities, identify under-performing buildings, verify energy-efficiency improvements, and how buildings can receive EPA recognition for superior energy performance. Portfolio Manager can also be used to comply with the California State law that requires disclosure of a building’s energy benchmarking score at the time of sale, lease, or refinancing.
Alice Liddell is a Senior Associate with ICF International. Ms. Liddell has twelve years of experience in energy efficiency as well as energy and environmental policy. Ms. Liddell provides support to utilities throughout the west for many EPA ENERGY STAR® programs, including lighting, commercial food service, consumer electronics, and the commercial and industrial building sector programs. In addition, Alice provides training for EPA’s ENERGY STAR Portfolio Manager benchmarking tool.
The program is designed to assist Building Designers meet the requirements of the Cal Green code. A Handout will be provided that will cover many other aspects of the Cal Green Non Residential code, but this session will focus on Energy Efficiency.
Since 2005, Gary has averaged over 125 days of instruction per year in a variety of energy conservation topics. These include: California Residential Energy Standards, Duct Testing for HVAC contractors, CHEERS Rater certification training for Building Envelope, HVAC, Solar PV as well as core building science. In 2008 Gary developed and was the lead instructor the CHEERS Existing Home training program. This extensive four-day class focuses on building science as well as the art of residential energy audits. Gary’s extensive field experience as a HERS rater and his technical building science knowledge ensures that his training is accurate and easy to understand. Gary’s light-hearted, logical and down-to-earth presentation style ensures that participants understand the material and how to apply the specific rules or applications to their particular situation.
Gary has been involved with Green building beginning in 2003 when he first became a LEED AP and has continued his support of Durable Sustainable Design. He has been on and coordinated Design /Implement Teams for Energy Management, Waste Reduction and Building Failure Remediation since the 1980’s.
The program is designed to assist Building Designers meet the requirements of the Cal Green code. A Handout will be provided that will cover many other aspects of the Cal Green Non Residential code, but this session will focus on Energy Efficiency.
Since 2005, Gary has averaged over 125 days of instruction per year in a variety of energy conservation topics. These include: California Residential Energy Standards, Duct Testing for HVAC contractors, CHEERS Rater certification training for Building Envelope, HVAC, Solar PV as well as core building science. In 2008 Gary developed and was the lead instructor the CHEERS Existing Home training program. This extensive four-day class focuses on building science as well as the art of residential energy audits. Gary’s extensive field experience as a HERS rater and his technical building science knowledge ensures that his training is accurate and easy to understand. Gary’s light-hearted, logical and down-to-earth presentation style ensures that participants understand the material and how to apply the specific rules or applications to their particular situation.
Gary has been involved with Green building beginning in 2003 when he first became a LEED AP and has continued his support of Durable Sustainable Design. He has been on and coordinated Design /Implement Teams for Energy Management, Waste Reduction and Building Failure Remediation since the 1980’s.
The program is designed to assist Building Designers meet the requirements of the Cal Green code. A Handout will be provided that will cover many other aspects of the Cal Green Non Residential code, but this session will focus on Energy Efficiency.
Since 2005, Gary has averaged over 125 days of instruction per year in a variety of energy conservation topics. These include: California Residential Energy Standards, Duct Testing for HVAC contractors, CHEERS Rater certification training for Building Envelope, HVAC, Solar PV as well as core building science. In 2008 Gary developed and was the lead instructor the CHEERS Existing Home training program. This extensive four-day class focuses on building science as well as the art of residential energy audits. Gary’s extensive field experience as a HERS rater and his technical building science knowledge ensures that his training is accurate and easy to understand. Gary’s light-hearted, logical and down-to-earth presentation style ensures that participants understand the material and how to apply the specific rules or applications to their particular situation.
Gary has been involved with Green building beginning in 2003 when he first became a LEED AP and has continued his support of Durable Sustainable Design. He has been on and coordinated Design /Implement Teams for Energy Management, Waste Reduction and Building Failure Remediation since the 1980’s.
The program is designed to assist Building Designers meet the requirements of the Cal Green code. A Handout will be provided that will cover many other aspects of the Cal Green Non Residential code, but this session will focus on Energy Efficiency.
Since 2005, Gary has averaged over 125 days of instruction per year in a variety of energy conservation topics. These include: California Residential Energy Standards, Duct Testing for HVAC contractors, CHEERS Rater certification training for Building Envelope, HVAC, Solar PV as well as core building science. In 2008 Gary developed and was the lead instructor the CHEERS Existing Home training program. This extensive four-day class focuses on building science as well as the art of residential energy audits. Gary’s extensive field experience as a HERS rater and his technical building science knowledge ensures that his training is accurate and easy to understand. Gary’s light-hearted, logical and down-to-earth presentation style ensures that participants understand the material and how to apply the specific rules or applications to their particular situation.
Gary has been involved with Green building beginning in 2003 when he first became a LEED AP and has continued his support of Durable Sustainable Design. He has been on and coordinated Design /Implement Teams for Energy Management, Waste Reduction and Building Failure Remediation since the 1980’s.
This workshop will provide a general overview of daylighting strategies in commercial buildings, emphasizing the importance of integrating daylighting with energy-efficient lighting systems and controls. We will also explore how daylighting is achieved from a LEED standpoint and how CA's Title 24 addresses daylighting.
Sandy Houck, LC, LEED AP of Brummitt Energy Associates will present the benefits of daylighting strategies for your commercial project.
n today's economy, it's tough for homeowners to find financing for their energy efficiency and renewable energy upgrades. This free workshop introduces a wide variety of residential clean energy financing products for energy efficiency, solar PV and solar thermal installations.
We will also cover current clean energy rebates that also help bring down project and financing costs, improve the customer's ROI and increase the chance for contractor sales. Don't miss this opportunity to ask questions and talk with representatives from financial institutions over a networking lunch. Breakfast will also be provided.
Space is limited, so register soon!
Who Should Attend?
Contractors working in the clean energy industry including:
Home Performance Contactors
Energy Advisors
HVAC Contractors
Insulation Contractors
BPI Certified Professionals
Solar Contractors
Solar Integrators
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Michelle Kaufmann will talk about a quest for simplicity as a core component to a mission of making thoughtful, sustainable design accessible.
She will talk about her work in prefabrication, design-build, green homes and sustainable communities. Rethinking not only what we make and how we make it, but also redesigning the design process itself is key to the future of architecture and sustainability. Innovations in this category are abundant and exciting, and with strategic focus can help us all to have more quality, less clutter and simpler lives.
The upcoming 2013 Title-24 Building Efficiency Standards were approved by the California Energy Commission on May 9, 2012. The new Title-24 energy code incorporates significant changes that will affect architects, builders, contractors, energy consultants, and solar PV installers. This class will review the upcoming changes to the energy code and the impact on building design along with compliance strategies that will allow you to comply with the new, stricter energy code cost effectively.
Mark Madison is a Certified Energy Plans Examiner, Certified Energy Analyst, HERS rater, and serves on the board of directors of the California Association of Building Energy Analysts (CABEC).
We will discuss some strategies for incorporating water harvesting into sustainable landscaping, using example projects to illustrate our points. We will focus on residential systems for outdoor usage but will also touch on commercial applications and non-potable indoor use.
Many building owners have the desire to upgrade their commercial
properties, but in the current state of the economy they are at a loss as to how to financial such upgrades. The presentation will also review current trends in rebates, public sector financing and private sector financing that make such upgrades possible.
Target Audience:
I think the target audience for this presentation will be building industry
professionals, developers, building owners, property managers and
commercial real estate brokers, as well as educators from real estate
development programs such as San Diego State’s.
How the people of a small town on the cross road to the silk road in Persia used micro-climate and their local materials to create energy-efficient buildings.
- Assess how they have used sun, wind and water
- Passive solar design
- Landscape and thermal mass to transform a harsh natural environment into comfortable spaces
- Evaluate innovative uses of local material in their buildings
- Santa Fe architecture and similarities to Persian architecture
- Observe the use of these techniques in modern architecture
Storm windows, insulating shades, sash replacements, awnings - The good news is that we have so many ways to improve the performance of our windows. The bad news is...there are so many ways to improve the performance of our windows! How in the world can we objectively compare them on price, thermal performance, ease of installation, ease of use, solar control, privacy, and durability?
Lawrence Berkeley National Laboratories and BuildingGreen are working on simple and easy-to-use resources for selecting window retrofit options. With input on climate, existing window attributes, and performance priorities, anyone can cut through the difficulties of deciding how to improve the overall performance of existing windows.
Using resources from www.windowattachments.org, webinar participants will work through window attachment selection scenarios with the instructor and learn how to use these resources with their clients and on their own projects.
The new 2008 Title-24 Building Efficiency Standards became effective January 1, 2010. One of the most sweeping changes involve residential indoor and outdoor lighting requirements, particularly kitchen lighting and the new adoption of ASHRAE 62.2 indoor air quality code.
Kitchen Lighting, Title-24
New restrictions, control requirements, high efficacy fixture requirements and incandescent allowances, and interior lighting worksheets will add an additional layer of complexity to residential lighting design. This class will bring you up to speed on the new changes and address the underlying principles, calculation methods, strategies to assist you in complying with the new code changes and take you step by step thru the new CF-6R-LTG-1 lighting certificate of installation which must be filled out before the final certificate of occupancy will be issued.
Kitchen Lighting, Title-24
You will also understand which fixtures will comply as high efficacy (not all LED fixtures are certified as high efficacy), the lighting control requirements for each room type and the new fixture and control requirements for residential outdoor lighting.
Title-24, Title-24
California has now adopted the requirements of ASHRAE 62.2-2007 which means that starting January 1, 2010, all low-rise residential buildings are required to install whole house mechanical ventilation and satisfy other requirements to achieve acceptable indoor air quality. Openable windows will no longer be an acceptable method for satisfying outdoor air requirements. This will involve calculations for determining the minimum ventilation cfm and designing a system to provide the necessary airflow with proper controls. You will learn the proper method for determining ventilation airflow, strategies for designing a cost effective ventilation system, and how to fill out the new ventilation Certificate of Installation.
Kitchen Lighting, Title-24
Learn from one of the leading experts in California’s Title-24 Building Efficiency Standards (Title-24), Mark Madison, a state certified Energy Plans Examiner and Certified Energy Analyst, HERS rater, Greenpoint rater with over 25 years experience with building energy code compliance analysis, enforcement and training.
Learn why sustainable real estate has become such a popular choice for individual and institutional investors. See what's driving the market and learn how you can leverage this opportunity in your business.
This beginning level seminar is designed for non-residential building owners/managers/consultants and real estate professionals who want to track and understand their building’s energy usage using a free online tool called ENERGY STAR Portfolio Manager. Learn how the Environmental Protection Agency (EPA) benchmarking tool can guide investment priorities, identify under-performing buildings, verify energy-efficiency improvements, and how buildings can receive EPA recognition for superior energy performance. Portfolio Manager can also be used to comply with the California State law that requires disclosure of a building’s energy benchmarking score at the time of sale, lease, or refinancing.
Alice Liddell is a Senior Associate with ICF International. Ms. Liddell has twelve years of experience in energy efficiency as well as energy and environmental policy. Ms. Liddell provides support to utilities throughout the west for many EPA ENERGY STAR® programs, including lighting, commercial food service, consumer electronics, and the commercial and industrial building sector programs. In addition, Alice provides training for EPA’s ENERGY STAR Portfolio Manager benchmarking tool.
The program is designed to assist Building Designers meet the requirements of the Cal Green code. A Handout will be provided that will cover many other aspects of the Cal Green Non Residential code, but this session will focus on Energy Efficiency.
Since 2005, Gary has averaged over 125 days of instruction per year in a variety of energy conservation topics. These include: California Residential Energy Standards, Duct Testing for HVAC contractors, CHEERS Rater certification training for Building Envelope, HVAC, Solar PV as well as core building science. In 2008 Gary developed and was the lead instructor the CHEERS Existing Home training program. This extensive four-day class focuses on building science as well as the art of residential energy audits. Gary’s extensive field experience as a HERS rater and his technical building science knowledge ensures that his training is accurate and easy to understand. Gary’s light-hearted, logical and down-to-earth presentation style ensures that participants understand the material and how to apply the specific rules or applications to their particular situation.
Gary has been involved with Green building beginning in 2003 when he first became a LEED AP and has continued his support of Durable Sustainable Design. He has been on and coordinated Design /Implement Teams for Energy Management, Waste Reduction and Building Failure Remediation since the 1980’s.
The program is designed to assist Building Designers meet the requirements of the Cal Green code. A Handout will be provided that will cover many other aspects of the Cal Green Non Residential code, but this session will focus on Energy Efficiency.
Since 2005, Gary has averaged over 125 days of instruction per year in a variety of energy conservation topics. These include: California Residential Energy Standards, Duct Testing for HVAC contractors, CHEERS Rater certification training for Building Envelope, HVAC, Solar PV as well as core building science. In 2008 Gary developed and was the lead instructor the CHEERS Existing Home training program. This extensive four-day class focuses on building science as well as the art of residential energy audits. Gary’s extensive field experience as a HERS rater and his technical building science knowledge ensures that his training is accurate and easy to understand. Gary’s light-hearted, logical and down-to-earth presentation style ensures that participants understand the material and how to apply the specific rules or applications to their particular situation.
Gary has been involved with Green building beginning in 2003 when he first became a LEED AP and has continued his support of Durable Sustainable Design. He has been on and coordinated Design /Implement Teams for Energy Management, Waste Reduction and Building Failure Remediation since the 1980’s.
The program is designed to assist Building Designers meet the requirements of the Cal Green code. A Handout will be provided that will cover many other aspects of the Cal Green Non Residential code, but this session will focus on Energy Efficiency.
Since 2005, Gary has averaged over 125 days of instruction per year in a variety of energy conservation topics. These include: California Residential Energy Standards, Duct Testing for HVAC contractors, CHEERS Rater certification training for Building Envelope, HVAC, Solar PV as well as core building science. In 2008 Gary developed and was the lead instructor the CHEERS Existing Home training program. This extensive four-day class focuses on building science as well as the art of residential energy audits. Gary’s extensive field experience as a HERS rater and his technical building science knowledge ensures that his training is accurate and easy to understand. Gary’s light-hearted, logical and down-to-earth presentation style ensures that participants understand the material and how to apply the specific rules or applications to their particular situation.
Gary has been involved with Green building beginning in 2003 when he first became a LEED AP and has continued his support of Durable Sustainable Design. He has been on and coordinated Design /Implement Teams for Energy Management, Waste Reduction and Building Failure Remediation since the 1980’s.
The program is designed to assist Building Designers meet the requirements of the Cal Green code. A Handout will be provided that will cover many other aspects of the Cal Green Non Residential code, but this session will focus on Energy Efficiency.
Since 2005, Gary has averaged over 125 days of instruction per year in a variety of energy conservation topics. These include: California Residential Energy Standards, Duct Testing for HVAC contractors, CHEERS Rater certification training for Building Envelope, HVAC, Solar PV as well as core building science. In 2008 Gary developed and was the lead instructor the CHEERS Existing Home training program. This extensive four-day class focuses on building science as well as the art of residential energy audits. Gary’s extensive field experience as a HERS rater and his technical building science knowledge ensures that his training is accurate and easy to understand. Gary’s light-hearted, logical and down-to-earth presentation style ensures that participants understand the material and how to apply the specific rules or applications to their particular situation.
Gary has been involved with Green building beginning in 2003 when he first became a LEED AP and has continued his support of Durable Sustainable Design. He has been on and coordinated Design /Implement Teams for Energy Management, Waste Reduction and Building Failure Remediation since the 1980’s.
This workshop will provide a general overview of daylighting strategies in commercial buildings, emphasizing the importance of integrating daylighting with energy-efficient lighting systems and controls. We will also explore how daylighting is achieved from a LEED standpoint and how CA's Title 24 addresses daylighting.
Sandy Houck, LC, LEED AP of Brummitt Energy Associates will present the benefits of daylighting strategies for your commercial project.
n today's economy, it's tough for homeowners to find financing for their energy efficiency and renewable energy upgrades. This free workshop introduces a wide variety of residential clean energy financing products for energy efficiency, solar PV and solar thermal installations.
We will also cover current clean energy rebates that also help bring down project and financing costs, improve the customer's ROI and increase the chance for contractor sales. Don't miss this opportunity to ask questions and talk with representatives from financial institutions over a networking lunch. Breakfast will also be provided.
Space is limited, so register soon!
Who Should Attend?
Contractors working in the clean energy industry including:
Home Performance Contactors
Energy Advisors
HVAC Contractors
Insulation Contractors
BPI Certified Professionals
Solar Contractors
Solar Integrators
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024Tobias Schneck
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
Elevating Tactical DDD Patterns Through Object Calisthenics
ClipperCreek: PEV Infrastructure
1. R e c o n n e c t C a lif o r n ia G r a n t P r o g r a m
“C a l if o r n ia ’s P r o g r a m t o Up d a t e P u b l ic E V
C h a r g in g I n f r a s t r u c t u r e ”
Will Barrett
• Click to edit Master text styles
ClipperCreek, Inc.
2/25/2012
• Second level
CEC Grant Program Presentation
• Third level
• Fourth level
• Fifth level
U C D a v is , D a v is , C A 6 th S t r e e t L o t , T e m e c u la ,
C V S , G r a n it e B a y ,
9 5 6 18 C A 92590
C A 95746
1
2. Reconnect CA – The Program
• The California Energy Commission (CEC) together with ClipperCreek have
funded a program to upgrade existing publicly available EV charging
infrastructure to the new SAE J1772 charging standard.
• The SAE J1772 standard has been adopted universally by all BEV
(battery electric vehicle) and PHEV (plug in hybrid electric vehicle)
• Click to edit Master text styles
automakers in the US.
• Together, the CEC and ClipperCreek have funded 100% of this upgrade.
• Second level
• Third level
• Fourth level
• Fifth level
E le c t r o n ic A r t s , R e d w o o d C it y , C A 9 4 0 6 5 M a r r io t t , P a lm D e s e r t , C A 9 2 2 6 0
2
3. “Plug-ins” are Here and More Are Coming . . .
Currently Currently Currently
Available Available Available
• Click to edit Master text styles
Ford Focus EV 2012 Nissan Leaf 2010 Chevy Volt 2010
• Second level Currently
Available
Currently
Available
Currently
Available
• Third level
• Fourth level
Smart Fortwo 2011 Ford Transit Connect Toyota Prius 2012
• Fifth level
Currently Currently
???
Available Available
Toyota RAV4 EV 2012 Fisker Karma 2012 BMW ActiveE 2012
3
4. CEC Grant funded EVSE Product
• ClipperCreek CS-40 EVSE will replace
existing, outdated EVSEs
• Input Power: 208-240 VAC 40 Amp
dedicated branch circuit (this is the same
• Click to edit Master text styles
power requirement as existing legacy
equipment).
• Second level • Output Power: 30 Amps, 7.2kW Maximum
• ClipperCreek Pedestal – Fits the same
• Third level footprint as existing pedestals
• 4’ tall Cold Rolled Steel – For mounting the
• Fourth level CS-40
• Charge station hardware and
• Fifth level installation are provided to the grant
recipients at no cost under the
Reconnect California program!
L e is u r e T o w n C e n t e r ,
V a c a v ille , C A 9 5 6 8 7
4
5. CEC Grant-Funded J1772 EVSE Upgrade
Public Charging Sites
• One of the largest EV infrastructure
programs in California history.
• “Legacy” EVSE installation qualifies
site for no cost upgrade.
• • Click to edit Master text styles
ClipperCreek upgrades began July
’11 and will conclude in July 2012.
• • Second levelEVSEs
38 Sites and 70 Legacy
have been updated in the Northern
• Third level
California area.
• To date over 130 Legacy EVSEs
• Fourth level over 80
have been upgraded at
sites Statewide.
• • Fifth mapping
Free location level by
ReCarGo.com,
EVChargerNews.com,
afdc.energy.gov N o r t h e r n C A E V R e -C h a r g e S it e s
www.EVChargerNews.com
5
6. Grant funded equipment upgrades are Awarded
• Click to edit Master text styles basis.
on a first come first serve
•Sign up level
Second Today to Take Advantage of
• Third level This Program
• Fourth level
Thank You . . .
• Fifth level
Will Barrett
Will@ClipperCreek.net
(530)-887-1674 ex 303
6
Editor's Notes
Sell to the customer in advance Tell them EVs are coming – get them engaged Answer the question – Why should I do this Power usage issue – play up how cheap it is to charge vehicles?