Bumper replacement can cost you a decent amount of money. But if you know the basics of your car components you can do it yourself.
Here is a 5 step simple process to help you with that.
2. You will need things
like spray rust
penetrant, the exact
bumper, brackets,
cardboard, screwdriver,
plier, insulated gloves,
etc prescribed in the
car manual.
1. Gather the required
materials
3. Before working on the
bumper, study all its
components and
mechanisms. This will
make your job easier
and you’ll get a rough
idea regarding all the
important parts.
2. Assess the area and
components
4. This is the most
complex part and will
need careful
consideration. Use
rust penetrant to
make the process
easy.
3. Remove the fasteners
5. Start by removing all
the extra accessories
as bulbs and light
connects. Then move
on to brackets and
bolts.
4. Remove everything
except the bumpers
6. The damaged
bumper will be fairly
easy to remove.
After it is done
successfully, grab on
to the new bumper.
5. Remove the damaged
bumper and install the
new one
7. If you need professional help with auto body repair in
Doylestown, A&G Customs is the place to be at.