This driver's handbook provides instructions for operating the TomTom navigation system. It describes general system features such as calculating the driver's position using vehicle sensors and digital maps. It also covers specific functions including route guidance, traffic information, system settings and troubleshooting. Precautions are outlined for safely using the navigation as an aid while driving.
3. Precautions during use
It is essential to follow the precautions below when using the system, both in the interest of safety and to prevent material damage.
You must always comply with the laws of the country in which you are travelling.
Precautions when operating the system
– perate the controls and read the information on the screen only when road conditions allow.
O
– Set the volume to a reasonable level so that outside noise can be heard.
Precautions regarding navigation
– Use of the navigation system does not in any way replace the responsibility or vigilance of the driver when driving the vehi-
cle.
– Depending on the geographical area, the map on the SD card may not have the latest information on new roads. Be alert.
In all cases, Road Traffic Regulations and road signs always take precedence over the directions of the navigation system.
Precautions concerning the equipment
– Do not attempt to dismantle or modify the system, as there is a risk of damage to equipment and fire.
– Contact a representative of the manufacturer in the event of malfunction and for all operations involving disassembly.
– Do not insert foreign objects or a damaged or dirty SD card into the reader.
– Allows clean your screen with a microfibre cloth or a soft, moistened cloth.
– Use an SD card which is suitable for your navigation system.
The description of the models given in this manual is based on the specifications at the time of writing. This manual covers all
existing functions for the models described. Whether or not they are fitted depends on the equipment model, options selected
and the country where it is sold. This manual may also contain information about functions to be introduced later in the year.
2
4. GENERAL DESCRIPTION (1/3)
The navigation system Note: after moving a long distance If these services are available in your
The navigation system calculates your without driving (ferry, rail freight), the country, the Live Services icon will
position and guides you using data: system may take several minutes to appear on the navigation screen.
adjust before retuning to normal opera-
– vehicle speed and information from tion.
the gyro (measuring the vehicle di- Navigation assistance
rection); function
– the digital map; The digital map The system suggests a route to your
The digital map contains the road maps chosen destination using:
– the GPS receiver; and town maps that the system re-
quires. This is found on the SD card. – its road map (on the SD card);
– the subscription-only Live Services.
– the positioning sensors which esti-
Note: when using the vehicle for the mate your location even if the GPS
first time, the speed information and LIVE services signals are lost;
the gyro will be undergoing final cali- These include road safety alerts, HD
bration. It is therefore normal that the Traffic™, local search with Google™ – information from the traffic informa-
system does not provide a very precise and the weather forecast. At the end tion service (depending on country);
location until the vehicles has travelled of the 3-month trial period, you can – road safety information (speeding
around fifty kilometres and undertaken extend your subscription on-line via warning, speed limit zone);
about forty pronounced corners. TomTom HOME™ (refer to the section
on System updates). – HD Traffic™, from subscription to
Live Services.
The GPS receiver Note: these services require a sub-
scription, and use an inaccessible SIM Finally, it indicates the route to take,
The navigation system uses GPS satel-
card integrated into the navigation step by step, using the display screen
lites (Global Positioning System) orbit-
system. and voice messages.
ing around Earth.
The GPS receiver receives signals
transmitted from several satellites. The
system can then locate the position of
the vehicle.
3
5. GENERAL DESCRIPTION (2/3)
A B D E F G I Estimation of the distance and time
remaining before you reach your
destination and the arrival time
J Exterior temperature
Preferences 1 of 5
A2/E35 Utrecht 6:47 K Current location
Marc Bloch L Audio information (depending on the
Use night Show POI Safety pref- vehicle)
colors on map erences
30 Avenue Léon
300 metres Note: you can return to the map screen
14
km 4.5 km at any time by pressing the “MAP-
Voice prefer-
ences
Turn off
sound
Manage
Favorites
0:05h 2D/3D button on the remote control or
6:52
Avenue du Golf
the central control.
LW 10245 66 RDS-AF 26°C
If you have just modified a parameter,
remember to confirm it using the soft
C L K J I H buttons before returning to the map
screen.
Displays Map screen
Menu screen D Navigation maps
E Indication of the next navigation in-
A Menu name struction (road sign)
B Name of the function or sub-menu F Traffic information
G Clock
C Menu page scroll bar H Instructions for navigation and dis-
Note: a menu may contain several tance to next change of direction
screen pages.
4
6. GENERAL DESCRIPTION (3/3)
M N M N
6:47 6:47
RADIO FM
102.45 66 300
metres FM 102.45 RADIO 1 6 300
metres
4.5 km 4.5 km
0:05h 0:05h
6:52 6:52
News Traffic 26°C Traffic 26°C
P O P O
Audio display Audio screen
When you use your audio system to M Source currently in use (Radio, CD,
modify a source or change the audio etc.)
parameters, the audio information ap- N Preset station.
pears in full screen mode. O Information on the current track or
When the operations are completed, the station.
audio screen closes again, the audio in- P Additional information on radio mes-
formation is displayed on band P and sages and services (I news…) and
the navigation screen reappears. the CD play mode (Random)
Depending on the vehicle, the radio
display appears either on the navi- For more information, refer to the
gation screen or on the dashboard manual for your audio system.
screen.
5
7. introduction to the controls (1/2)
Central control Function
1 Soft buttons Select and confirm
1 1 2 Access the Traffic information (short press), accessing
2 INFO/ROUTE
the programmed route summary (long press).
BACK
10 Rotate:
– move vertically and horizontally through the menus;
INFO
MAP
2D/3D ROUTE – modify the scale (ZOOM mode).
Shift (up, down, right, left):
3 Rotary button – move vertically or horizontally through the menus;
DEST MENU
– move around the map.
HOME SET Press:
REPEAT
MUTE
LIGHT
DARK
– confirm;
– display the quick menu.
9 8 7 6 5 3
Access the full navigation system menu (short press)/
5 MENU/SET
the system settings (long press).
Change the brightness of the screen (short press)
6 LIGHT/DARK or activate the standby screen to hide the map (long
press).
Repeats the instruction (short press), deactivates the
7 REPEAT/MUTE
voice guidance (long press).
Access the “Navigate to...” menu (short press), navi-
8 DEST/HOME
gate to your home (long press).
Note: depending on the vehicle, the From a menu: displays the map
9 MAP-2D/3D
system has either a central control From the map: switches the map to 2D/3D mode.
or a remote control.
10 BACK Back to previous screen.
6
8. introduction to the controls (2/2)
Remote control Function
1 Soft buttons Select and confirm
A Shift (up, down, right, left):
– move vertically or horizontally through the menu;
– move around the map.
4 4 Remote control
Press the central button:
– confirm;
– displays the quick menu.
1 1
5 MENU Accesses the full navigation system menu.
10
From a menu: displays the map
9 MAP-2D/3D
From the map: switches the map to 2D/3D mode.
9 5
10 BACK Back to previous screen.
Note: to connect your remote con- Note: depending on the vehicle, the
trol more quickly, press one of the system has either a central control
remote control buttons when the or a remote control.
system starts, before the legal no-
tices appear. LED A on the remote control flashes
once your navigation system is con-
Store the remote control in its hous- nected to it. To replace the batteries,
ing, away from sunlight, to ensure refer to the section entitled “Remote
Note: the remote control unit does control: batteries”.
not have press and hold functions. the batteries are not damaged.
7
9. swivel screen
Definition Manipulation Push the screen on the left or right to
swivel it.
Depending on the vehicle, your navi- To avoid any mistakes with the vehicle
gation screen can be turned to the left trajectory and/or accidents, it is recom-
and right to ensure it can be read with mended that the screen is moved when
the utmost comfort under any circum- the vehicle is stationary.
stances.
8
10. SD card: use, initialisation (1/2)
SD card
An SD card is supplied with the navi-
gation system. It includes, among other echt 6:47
things, a map of your country or group
of countries.
Updates are regularly issued, in partic- Léon
300
metres
ular for maps and fixed safety cameras.
4.5km
14
They are only available for download
km
0.05h
by inserting your navigation system’s 6:52
SD card into a computer which is con- RDS-AF 26°C
nected to the internet.
Once your new vehicle has been de-
livered, you will have a maximum of
60 days in which to update the map for
free. Once this time has elapsed, you
will need to pay for updates. To update your system and your map,
refer to the section entitled “System
update” in your user manual.
Only use an SD card which is com-
patible with your vehicle's naviga-
tion system.
Only use your SD card for operat-
ing and updating your navigation Remember to back up the data on
system. Do not insert any other the SD card regularly. Refer to the You can also download maps cover-
device (camera, portable GPS, section entitled “System update” in ing more countries than your origi-
etc.), or in another vehicle. your user manual. nal map (e.g. Western Europe).
9
11. SD card: use, initialisation (2/2)
6:47
A
echt
Main Menu 2 of 3
Léon
300
metres Cancel route Browse map Map correc-
tions
4.5km
14
km
0.05h
6:52
Add Favorite View route Remove SD
RDS-AF 26°C card
B
Inserting the SD card Removing the SD card
Switch off the ignition to switch off the From the main menu, select “Remove
navigation system and insert the SD SD card”, then confirm using the right-
card B in slot A. hand soft button. A message informs
Note: do not insert the SD card in an- you when you can remove the SD card.
other vehicle. To remove the SD card from slot A,
press on the card, then release it. The
card is released a few millimetres.
Pull the card to remove it completely.
The SD card is fragile; do not bend
it. Insert it the right way round, as
shown in the diagram.
10
12. Switching on/off
Switching on Hiding the map
The multimedia system switches on au- (depending on the vehicle)
tomatically when the ignition is switched From the quick menu, the “Hide Map”
on. button switches off the display screen.
In other cases, press the On/Off button Only the map and the instructions are
on your audio system. hidden. The audible warnings for cam-
Press the On/Off button on your audio 12:00 eras and the voice guidance instruc-
tions remain active, as does the audio
system to make the multimedia system
run for an extra 20 minutes. information from the radio.
24°C Press and hold the “LIGHT/DARK
button on your central control.
Switching off
Pressing any of the keys will switch the
With the ignition off, the system is deac- screen back on.
tivated automatically when the driver’s
door is opened.
Exterior temperature/clock Resetting the system
With the ignition on, press the On/Off
button on your audio system. With the ignition on, press the On/ To reset all the system parameters and/
Off button on your audio system. The or delete all personal data, use the
system then stops the guidance and “MENU/SET button to access the main
displays a simple clock screen (and the menu and select Change preferences”
temperature, depending on the vehi- then “Reset factory settings”, then
cle). follow the instructions on the screen
using the soft buttons.
11
13. Guided tours (1/2)
“Planning preferences”
This tutorial teaches you how to use the
“Planning preferences” menu.
Main Menu 3 of 3 15:15 Guided tours 1 of 2
A B
16:30
“Itinerary planning”
Photo gallery Itinerary plan-
ning
Prepare
route
Central
control
Driving view Menu op-
tions
This tutorial teaches you how to use the
“Itinerary planning” menu.
?
Status Information Help me! Guided tours Browse Planning pref- Itinerary
map erences planning
Guided tours “Driving view”
Your navigation system offers you tuto- This tutorial will teach you about the dif-
rials so that you can quickly become fa- ferent areas of your navigation screen
miliar with the different functions: and the best way to use them.
“Central Control operation” or “Menu options”
“Remote control” This tutorial teaches you about the
This tutorial will teach you to use the menus for the main functions.
central control and the remote control
for your navigation system. “Browse map”
This tutorial teaches you how to use the
“Browse map” menu.
12
14. Guided tours (2/2)
“TomTom HOME”
This tutorial teaches you how to use the
“TomTom HOME™” application.
Guided tours 2 of 2
“LIVE services”
Traffic infor-
mation
Warnings and Quick menu This tutorial teaches you how to use the
notifications
“LIVE services” menu.
LIVE
TomTom HOME LIVE serv-
ices
“Traffic information”
This tutorial teaches you how to use the
“Traffic info” menu.
“Warnings and notifications”
This tutorial teaches you about the dif-
ferent notices and information which
appear on the navigation screen.
“Quick menu”
This tutorial teaches you how to use the
“Quick menu” menu.
13
15. operating principles (1/2)
Central control Remote control
1 2 1 A 5
BACK
6
9:13am
A 4 B 15 sec
B
MAP
2D/3D
INFO
ROUTE
7 1 2 3 4 5
1 1
6 7 8 9 0
DEST MENU
HOME SET 2 Done
REPEAT LIGHT
MUTE DARK
C D
3
Navigating a menu Confirming/cancelling a Shortcuts
selection From the navigation map, some but-
Central control tons on your remote control unit have
Always confirm the selection by press-
– Turn rotary switch 3 for vertical or ing 3 or 7. To return to the previous shortcuts giving direct access to menus
horizontal movement (movement A menu, press 2. and functions.
or B); 4 Zoom,
– push 3 to move vertically or horizon-
tally (movement A or B). Special features of the 6 Info Menu.
remote control
Remote control
From the navigation map: Soft buttons
Press buttons 5 to move vertically or
horizontally (movement A or B). – the left soft button can be used to Soft buttons 1 (ṅ and Ṅ ) are
repeat the voice instruction; used to select or confirm an action or
– the right soft button can be used to selection C or D which appears at the
display the programmed route sum- bottom of the screen.
mary.
14
16. operating principles (2/2)
Description of the menus
Using these menus, and depending on
whether you have a central control or a
Quick menu Quick menu remote control, you can quickly access
the following menus:
Disable voice Use night colors Report safety
camera
Disable voice Use night colors Report safety
camera - Day/night colours: daytime/night-
13:22
time display;
- Report safety camera: reports the
13:22
Hide Map Cancel route Mark location of
map error
Hide Map Brightness prefer- Cancel route presence of a mobile or fixed speed
ences
camera;
- Cancel route: stops the guidance in
progress;
- Mark location of map error: flags
an error on the map;
- Disable/activate voice: switches
Quick menu for vehicles with Quick menu for vehicles with the guidance instructions on/off;
central control remote control - Hide map: hides the map;
- Brightness preferences: selects
From the navigation map, you can From the navigation map, you can the brightness of your navigation
access the quick menu directly by access the quick menu directly by system depending on the brightness
pressing on the centre button of your pressing on the centre button of your of the light outside.
central control. remote control.
15
17. Volume and VOICE
Selecting a voice
Your system allows you to select either
a synthesised or human voice. This
Preferences 1 of 5 Speech preferences 15:15 voice is used to give the voice instruc-
tions.
Use night
colors
Show POI
on map
Safety pref-
erences
Change voice Disable voice
To modify the voice used by your navi-
gation system, from the main menu,
select “Change preferences” then
Speech pref-
erences
Turn off
sound
Manage
Favorites Speech preferences “Speech preferences” and “Change
voice”. Selecting a voice from the list.
Synthesised voices
Synthesised voices are generated by
your navigation system. They give you
verbal instructions while you are driv-
Volume Deactivating the sound ing. They can give road directions, traf-
To turn off the sound, in the main menu, fic sign information, etc.
Changing the volume select “Change preferences”, or from
To change the volume, use the audio the quick menu on the remote control Recorded human voices
system volume control during a voice by pressing the centre button, then The human voices are recorded by an
instruction. If the instruction is too quick, “Turn off sound”. actor or actress.
you can repeat it using the “REPEAT/ To turn the sound back on, select the
Note: the human voices only give you
MUTE button on your central control “Turn on sound” heading.
simplified guidance instructions.
unit, or use the left soft button on your
remote control. Deactivating the voice
Refer to your audio system’s handbook. To deactivate the guidance instructions,
press and hold the “REPEAT/MUTE
button on the central control or select
Change preferences” then “Disable
voice”
16
18. reading a map
G Information about your journey, such
K
A B C D E as remaining distance, journey time
and arrival time.
Note: to select what will be shown,
A2/E35 Utrecht 6:47 select Change preferences” in the A2/E35 Utrecht 6:47
Marc Bloch main menu, then Status bar prefer- Marc Bloch
ences”.
30 Avenue Léon
300
metres
H Audio system information. 30 Avenue Léon
300
metres
14
4.5 km
I Current location. 14
4.5 km
J Sign giving the speed limit (the speed
km km
0:05h 0:05h
Avenue du Golf 6:52 given depends on the unit chosen). Avenue du Golf 6:52
LW 10245 66 RDS-AF 26°C Note: the sign turns red and flashes LW 10245 66 RDS-AF 26°C
if you drive faster than the speed limit
L
J I H G F Colour codes
The roads are displayed differently de-
Map key pending on the type of carriageway.
Map icons
A Warning of the next risk area with The navigation system uses icons K to
You have the option to change the col-
the related distance (fixed or mobile display points of interest (POI).
ours: in the main menu (MENU button),
safety camera, school, etc.). select Change preferences” then
B Name of the next major road or road “Change map colors”. Compass
sign information, if applicable.
C Traffic sidebar: display of incidents To display or remove the compass L,
on the route, traffic info reception in- from the main menu (button “MENU”),
dicator. select “Change preferences”, then
D Current time. “Show compass”.
E Distance to and indication of next
change of direction.
F Exterior temperature (depending on
the vehicle).
17
19. entering a destination (1/4)
– select the “Home”;
– select an address from the “Favorite” 1 2
section;
– select a destination from the loca-
Main Menu 1 of 3
tions in the “Recent destination” sec- Ville : Vers
Vers (Haute-Savoie) Formation
tion;
3, passage
Mongallet
Fontenay S/
Vers (Lot) France
Navigate to... Find alternative HD Traffic
– select an address from the “Point of A B C D E F G H I
Interest” (POI) section;
J K L M N O P Q R
LIVE
– select a “Point on map”;
S T U V W X Y Z 123
Change pref-
erences
LIVE services Safety Alerts – select a “Latitude” or “Longitude”.
Current position: X Done
Entering a “New address”
This item allows you to enter all or part 3
of the address: country, city, street and
house number.
“Navigate to...” menu Note: only addresses known to the
press the “Done” button to confirm
Press the “MENU button to access the the city highlighted in yellow.
system through the digital map are au-
Navigate to...” menu. – access the full list corresponding to
thorised.
your search by selecting arrow 2 to
The “Navigate to...” menu offers you When using for the first time: the right of the list.
several ways to enter a destination: – select the desired city and confirm.
– enter an address from the “Address” – select the destination country.
– enter the name of the required city – proceed in the same way for “Street”
section using one of the following and “No.”.
methods: using cursor 3.
– entering a full address (City and The system may suggest several Note: the system stores previously en-
street); cities in zone 1, the first line is always tered cities in its memory. You can di-
– searching by “Zip Code”; highlighted in yellow. rectly select one of these cities by se-
– selecting a “City center”; lecting zone 1.
– selecting a “Crossing or intersec-
tion”.
18
20. entering a destination (2/4)
Navigate to... 1 of 2 Navigate to... 1 of 2 Navigate to... 1 of 2
Home Favorite Address Home Favorite Address Home Favorite Address
Google Google Google
Recent Local Search Point of Recent Local Search Point of Recent Local Search Point of
destina- Interest destina- Interest destina- Interest
tion tion tion
“Home” – In the main menu, select the heading “Recent destination”
“Navigate to...”.
This box allows you to navigate to your – Select “Favorite” and confirm. This item enables you to select a des-
home and you can activate it from the – Select the required destination ad- tination from the list of addresses last
central control by pressing and holding dress in the list of stored addresses. used. These are automatically stored.
the “DEST/HOME button. – Confirm. In the main menu, select the heading
To save your home address, refer to the “Navigate to...” and then “Recent des-
section on “Add and manage favour- To save a destination as a favour- tination”.
ites” in your manual. ite, refer to the section on “Add and
manage favourites” in your manual. From the list of stored destinations,
select an address then confirm this ad-
“Favorite” Note: the “Favourite” icon will be dress as the destination.
greyed out if you do not have any desti-
The “Favorite” section contains the fa- nations stored.
vourite stored destinations and favour-
ites such as your place of work.
19
21. entering a destination (3/4)
Navigate to... 1 of 2 POI category: Navigate to... 1 of 2
Nightlife
Airport
Home Favorite Address Home Favorite Address
Rest area
Embassy
Google Google
Government office
Recent Local Search Point of Recent Local Search Point of
destina- Interest Library destina- Interest
tion tion
Find
“Point of Interest” (POI) Search by POI name “Local Search” with
Enter the name of the POI that you wish Google™
A point of interest (POI) is a service, to find and the system will automatically
establishment or tourist area close to a search for the point of interest. This service allows you to use a key-
location (start point, destination city, en word to quickly find any point of inter-
route, etc.). POIs are classed in differ- Search by POI category est and then make it a destination. It
ent categories, e.g. restaurants, muse- Select your desired category type. gives you quick access to the Google™
ums, car parks, etc. Choose the area you require: “POI near database, which contains the most up-
There are several options to find a point you”, “POI in city” or “POI near Home”. to-date information on companies and
of interest: Enter a city name and start the search services, including their addresses, tel-
– category, by selecting “Done”. ephone numbers, and ratings from in-
– the name of the desired POI. ternet users.
In the main menu, select the heading Note: this icon is only displayed if you
“Navigate to...” then “Point of Interest” have a subscription in the country where
and confirm. the LIVE Services are available (refer
to the section on “LIVE Services”).
20
22. entering a destination (4/4)
At the end of the calculation, the system
displays the navigation summary and
suggests two options:
– “Details” enables you to see details
Navigate to... 2 of 2
SEVRES
LIVE of the journey in various forms (refer
LE CHESNAY
Avenue Roger-Salengro
Chaville
to the information on “Route informa-
CHAVILLE tion” in the “Guidance” section).
0:13 h
VIROFLAY – “Done”, guidance starts.
Point on map Latitude
Longitude
GO
9.4 km
Note: if you do not confirm, this page
IQ Routes
20 mai, 9:50 will close after ten seconds and guid-
Details Done ance will start automatically.
Note: “ IQ Routes™ is a function which
optimises the journey time using statis-
tical data and allows routes to be calcu-
lated according to the average level of
“Point on map” “Latitude Longitude” traffic for the given day and time.
This function allows you to define a This function allows you to define a To activate or deactivate this function,
destination from the map. In the main destination using latitude and longitude refer to the information on “Planning
menu, select “Navigate to...” then values. preferences” in the “System settings”
“Point on map” using the buttons on the section
remote control or the rotary button on To plan a journey in advance, refer to
the central control. Confirming the destination the section entitled “Entering a destina-
From the central control or the remote Once the destination information has tion” in your user manual.
control, move around the map to po- been entered, the system calculates
sition the cursor on your destination, the route. By default, it is calculated
then confirm: the system calculates the using the fastest route.
route. Note: the calculation criteria can be
modified in the parameters.
21
23. guidance (1/4)
9:13am
A2 A67 D27 E34 9:57 A2/E35 Utrecht 6:47 View route
Venlo
Browse as Browse as Browse
300
text images map of
route
30 metres
4.5 km
14
51.7km
14 km
km
0:05h Show route
Demo
Show route
summary
Show traffic on
route
0:42h 6:52
10:39 LW 10245 66 RDS-AF 26°C
Find alternative
Lane images Guidance screens Route information
When approaching a road change (on Intersection map This function allows you to view your
major roads), the system may switch to route before guidance begins.
“Show lane images” mode: a 3D image During guidance, before each change
of direction, the system will gradually Select “Details” after having entered a
provides a close-up view of the junction destination. Guidance will begin.
with a turn arrow and road signs. zoom into the junction.
To deactivate automatic zooming mode, Six choices will be given:
To deactivate the lane guidance, refer
to the section on “System settings”. refer to the section entitled “Change – “Browse as text”,
preferences” – “Browse as images”,
– “Browse map of route”,
– “Show route Demo”,
– “Show route summary”,
– “Show traffic on route”.
22
24. guidance (2/4)
Note: to change your route (alternative “Browse as images”
route, adding waypoints, etc.) select This function allows you to see changes
“Find alternative” using the left soft in direction as images.
button.
LIVE
“Browse map of route” SEVRES
“Browse as text” Avenue Roger-Salengro
Trafic sur le
parcours
This function makes it possible to view LE CHESNAY Chaville
Pas de trafic sur le parco...
This function makes it possible to view the map of the route.
CHAVILLE
0:13 h
the route plan. VIROFLAY GO
+ Radars
9.4 km
0 fixe sur le parcours
Several details of the route will appear: “Show route Demo” IQ Routes
– direction change arrows, This function makes it possible to view 20 mai, 9:50
Details Done
a demonstration of the route. You can
– road types, select the speed of the demonstration.
– road names,
“Show route summary”
– miles/kilometres before a fork.
This function is used to return to the
previous screen. The details of the jour- “Show traffic on route”
ney time, the miles and the type of jour- This function gives you an overview of
ney (“IQ Routes™ activated/deacti- all the traffic incidents affecting your
vated) are displayed. journey.
Note: to access this page directly from Once subscribed, the Live tab allows
the navigation map, use the right soft you to view the details of your jour-
button on the remote control or, from ney (delays caused by traffic, fixed and
the central control, the “INFO/ROUTE mobile safety cameras).
button.
23
25. guidance (3/4)
“Avoid roadblock” “Recalculate original”
Select this menu if you see a road- Select this menu to return to the origi-
block or a line of traffic ahead which nal route.
Find alternative 9:13am was not indicated by the “Traffic info”
service. You then have to choose how
much of the route ahead you want to
Calculate alter- Avoid road- Travel via...
native block avoid. Choose from the different op-
tions: Avoid 100m, Avoid 500m, Avoid
2000m, Avoid 5000m. Your system will
Recalculate
original
Avoid part of
route
Minimize
traffic recalculate your route avoiding the sec-
tion of the route for the distance you se-
delays
Destination:
lected.
“Travel via...”
Select this menu to change your route
so that it goes via a particular location,
Alter route perhaps to pick someone up on the
To alter your route, from the main menu, way. You choose the location you want
select “Find alternative” then one of the to pass though the same way as you
following options. choose a destination. So you can select
from all the same options: Address,
“Calculate alternative” Favorite, Point of Interest and Point on
Select this menu to calculate an alter- map. Your system will calculate a new
native to the route already planned. route to your destination that passes
Your system will look for another route through the location you chose.
from your current location to your des-
tination.
24
26. guidance (4/4)
Destination: 9:13am Main Menu 2 of 3
Cancel route Browse map Map correc-
Calculate alter- Avoid road- Travel via...
native block tions
Add View route Remove SD
Favorite card
Recalculate Avoid part of Minimize
original route traffic
delays
Destination:
“Avoid part of route” Deactivating guidance
Select this menu to avoid a part of the To stop guidance when in progress, in
route. Use this option if you see that the main menu (MENU/SET button),
your route includes a road or a junction select Cancel route” and confirm.
that you wish to avoid. Then, choose To resume guidance, select “Navigate
the road that you wish to avoid from the to...”, then “Recent destination”.
list of roads on your route.
Note: to stop guidance, from the cen-
“Minimize traffic delays” tral control or the remote control, press
the centre button then “Cancel route”.
Select this menu for your system to
plan your route based on the latest traf-
fic information.
25
27. Find alternative
Main Menu 1 of 3 Find alternative Travel via...
Navigate to... Find alternative HD Traffic Calculate alter- Avoid roadblock Travel via... Home Favorite Address
native
LIVE
Google
Change pref- LIVE services Safety Alerts Minimise Recent Local Search Point of Interest
erences Show route Avoid part of destina-
summary route delays
tion
Current position: Current position: Current position:
Itinerary with waypoints The system calculates the route taking To access the menu, from the main
the detour into account. menu (MENU/SETbutton), select
To add waypoints to your route, press Prepare route”.
“MENU/SET in the main menu, select Note: you can add several waypoints
Find alternative”, “Travel via...”, then to your route. Select a starting point in the same way
enter the waypoint address. as you would select your destination.
Planning a route in advance Select a destination.
You can use your navigation system to Choose the type of route, then confirm.
plan journeys in advance by selecting The system plans the route and allows
both your starting point and your des- you to view the details.
tination. For example, to find out how
long a journey is going to take before
you start, or to check the route of a jour-
ney you are planning.
26
28. Traffic information (1/3)
1 2 Display
A The “Traffic info” function
The navigation system indicates traffic
Main Menu 1 of 3
B incidents:
– by displaying symbols on the map
Navigate to... Find alternative Traffic
C (list of icons at the end of the sec-
tion);
– with voice messages.
LIVE
14 D
Change prefer-
ences
LIVE services Safety Alerts km 14
km
Depending on the operating status of
Current position: E the “Traffic info” service, the following
icons are displayed on the traffic side-
bar:
F A Your device is searching for an FM
station broadcasting traffic informa-
tion.
The “Traffic info” service The traffic bar B Traffic information is up-to-date or
“Traffic info” is a service available on The side traffic bar displayed in guid- being updated.
your navigation system which allows ance mode, shows the latest traffic in- C Traffic information has not been up-
you to receive up-to-date traffic infor- formation for your route. dated for at least 9 minutes.
mation from the best local sources. Note: the traffic sidebar differs depend- D Traffic information has not been up-
The traffic info service uses TMC in- ing on the source used. Bar 1 with the dated for at least 14 minutes.
formation transmitted on the FM band. LIVE Services connected. E Traffic information has not been up-
This service flags up events as points Bar 2 if the RDS-TMC source is con- dated for at least 19 minutes.
on the map and covers major roads. It nected. F Traffic information has not been up-
is updated approximately every 15 min- Note: please see the “LIVE Services” dated for at least 24 minutes.
utes. chapter for more information about the
Note: the menu title is “HD Traffic™ “HD Traffic™ service.
depending on the LIVE Services used.
The availability of the “Traffic Info”
service varies according to country.
27
29. Traffic information (2/3)
Traffic information can include: “Show traffic on route”
– accidents and incidents, Select this menu to see an overview of
– traffic volumes, all traffic incidents on your route. You
– roadworks, TomTom HD Traffic can use the left and right buttons on the
– weather conditions, resulting screen to see more detailed
– general information, Minimise Show traffic on Browse information about each of these inci-
– lane closures. delays route map
dents.
Traffic preferences Read aloud
traffic info
“Browse map”
This menu enables you to explore the
map and keep up-to-date with the traf-
fic situation in your area. To access the
map, in the main menu select “Traffic”,
then “Browse map”. The map displays
in the last location shown. For informa-
“Traffic info” configuration tion relating to the incidents shown on
menu the map, select the incident using the
right and left buttons, then confirm.
Manage the “Traffic info” service
To manage “Traffic info” service infor- Note: to access an area you are
mation on the main menu (“MENU/ searching for more quickly, add it to
SET button), select Traffic”. The sub- your favourites (refer to the section en-
menus will appear. titled “Browse map”.)
“Minimise delays”
Select this option to alter your journey
based on the latest traffic information.
28
30. Traffic information (3/3)
“Traffic preferences”
Symbol Meaning Symbol Meaning
To access this menu, select “Traffic” in
the main menu button “MENU/SET,
then Traffic preferences”.
Accident Heavy rain
The following preferences can be
changed:
– Automatically minimise delays Traffic jams Snow
after every traffic update. To select
your preference, tick the box to the
right of your choice using the cen- One or more
tral confirmation button. Once your closed roads Strong wind, storm
choice has been selected, select
“Done” with the soft button.
– Beep when traffic situation on Road closed Fog
route changes. Your device beeps
when a new traffic incident occurs on
your current route. Traffic incident Ice
Note: by default, the beep is deacti-
vated.
Road works
“Read aloud traffic info”
Select this menu for your device to read
all traffic incidents aloud on your route.
29
31. Browse map (1/2)
“Options”
Access the option from the map
browser. This menu allows you to select
1 2 3 4km
Map detail preferences 9:13am the information that you wish to see on
SEVRES Show Points of Interest your browser.
LE CHESNAY Favorites
CHAVILLE To change the display preferences for
VIROFLAY
Traffic
points of interest (POI), press left soft
Images
button (POI).
Names
To confirm your selection, select the
GO
Coordinates
Find Options/Zoom POI Done
right soft button (Done).
A
To browse the map, press “MENU/SET Note: soft button A changes depend-
in the main menu, select Browse map” ing on the type of navigation control.
or use one of the direction buttons on If you have a central control, the right
the control from the navigation view. soft button accesses the options. If you
have a remote control, the right soft
button zooms using the up and down
keys. In this case, to access the op-
tions, press the centre button, then the
right soft button.
30
32. Browse map (2/2)
Find... 1 2 3 4km Cursor position:
SEVRES
LE CHESNAY
Home Favorites Address Center on car location Navigate there Find...
CHAVILLE
VIROFLAY
Google
GO Add as Add as Correct lo-
Recent Local Search Point of
destina- Favorite POI cation
Interest
tion
Find Options/Zoom Cursor position: Militaire vliegbasis eindhoven Options
(+31-40-2506911)
“Find” “Cursor position:”
You can centre your map on a specific To access the “Cursor position:” from
location; press the left soft button (Find) the map browser, press the centre
and this menu will allow you to centre: button. This menu enables you to:
– your home, – centre the map on the vehicle loca-
– a favourite, tion,
– an address, – navigate to a point on the map,
– a recent destination, – search for a point on the map,
– local search with Google™, – add a point on the map to the favour-
– a point of interest. ites,
– add a point on the map to the POI,
– correct the location of your vehicle.
31