Presentation about factory Facilities, and Quality Management.

1. Abdullah Ibrahim Al Nafa Factory.

2. Introduction.
We are Abdullah Ibrahim Al Nafa Factory, ISO 9001: 2008, manufacturers of Industrial Safety
Uniforms and Corporate uniforms.
Our Production area is more than 900 SQM , attached with Highly automated Machines
Imported From Japan and USA. Our Full Productive Capacity can reach up to 2000 Pcs
daily.
Our Team has High Experience in Producing Safety Wears with high Quality Protection.

3. Our ShowRoom.

4. OUR TECHNICAL
DEPARTMENTS.

5. Ware House Department:
We have organized system in stores management, Raw material
inspection, outward, implemented with Just in Time and 5s Protocol.

6. Designing/Sample.
We are facilitated with advanced equipments From USA Auto CADD designer
setup, Digitizer, with this equipment, joined experienced Pattern maker and
sampling team enriching the quality and appearance.

7. Cutting Department:
Our cutting department equipped with GERBER CADD cutter ,which
can produce 2000 pcs Per day, also perfect cut which gives garment
elegant look.

8. Sewing Department :
Facilitated with imported machinery from USA and JAPAN, advanced Techniques Like Key
hole , Bar tack Secure stitch, Auto trouser Loop Attach. Which gives perfect and Durable
Seams. Also our Tailors are trained With a special team experienced in safety Uniform
engineering.

9. Embroidery Department:
Embroidery department functioning with Imported Machine from Japan, this machine is
capable of doing embroidery in caps and hats also in the garment.
Experienced designer and Advanced designing system engaged giving Best Finish for your
company Logos which gives royal and prestigious look .

10. Finishing Department:
Finishing department is enhanced with Modern Steam Boiler system which makes garment
best press last longing , experienced checker team inspect whole bulk
to find minor alteration garments .garments are packed with responsibility in order to satisfy
consumer.

11. Quality Assurance Department:
“ QUALITY IS EVERONE RESPONSBLITY”.
Is our management goal, so our team member are trained to achieve this in all stages , we
have quality control at varies stages the Flow Chart will help u to understood .

12. QUALITY CONTROL PROCESS FLOW CHART.
RAW MATERIAL INSPECTION
Raw material Visual inspection is done on Fabric and trims to check defects are any functionality
changes, before taking in to the productivity.
Cutting Inspection.
Cutting inspection is done at the stage of pre/Post cutting, for Shrinkage, Shades, Bundle
numbering, Defect Pcs, Unbalanced cut.
Sewing Inline /Out Line inspection.
Sewing Inspection Done Pre and post stages, All operation will be checked randomly inline by our
rolling quality control team also at, end line checking team will inspect all garments 100% to keep
quality and customer requirement.
Finishing Stage.
At finishing stage garment will be checked Pre 100% before press and Packed ,so presentation
alteration, Measurement label mismatching will be recovered in this stage.
Final audit.
All bulk lots will be checked post packing by randomly, AQL 2.5 methodology is initiated in this stage ,
through finding Minor and major Defects we decide Pass or re inspecting 100% of the goods in
order to give durable and exact customer requirement.
Customer Feedback.
we accept Customer feedback happily, and we feel this is our strength to improve our product quality
and market. once goods delivered we take valuable points from the customer in order to improve our
to productivity methodology.