There is always this tree near your home attached to which you have lots of your memories. It has been there as long as you remember. During constructions trees are damaged in many ways and since they cannot cry out their agony, they eventually die out due the damage. Therefore everyone must take some safety measures that you need to take to safe guard the trees during constructions.
1. Protecting Trees during Construction
There is always this tree near your home attached to which you have lots of your memories.
It has been there as long as you remember. During constructions trees are damaged in many
ways and since they cannot cry out their agony, they eventually die out due the damage.
Therefore everyone must take some safety measures that you need to take to safe guard
the trees during constructions.
First and foremost is to recognise the area covered by the tree over the ground by the trunk
and the branches and below the ground by the roots. Then avoid using any construction
equipments or digging the ground around those areas.
If the construction involves digging you must know the damage possible and the extent to
which it may affect the tree. Roots of trees are found usually 6 to 12 inches from the ground
and extend far from the tree mostly one to two times the height of the tree. If the roots are
cut further from the tree then less harm is done to main body. The damage increases as
close as it get to the tree. Since roots give support to the tree and hold it steady on the
ground, cutting roots the wrong way results in the tree falling over.
Apart from the roots another important factor is soil. Continuous construction around the
tree or digging can loosen the soil and sometimes even contaminate them. It is dangerous
for the tree if the soil around it loosens because then the soil would not be fit to bear the
weight of the tree and the tree ends up falling over. On the other hand due to the use of
heavy machineries or use of cement the pores of the soil close leaving no space for the roots
to breath. Uses of chemicals also contaminate the soil and are also absorbed by the tree.
There are many technicalities or steps that should not be ignored in order to protect a tree
during construction. Therefore it is best to hire a professional arborist who would help in
laying out safety measures according to the plans of your construction and prevent
unnecessary damage to your tree. Make sure not only to hire a professional arborist but
also a refined builder who does the needful to protect the trees around the area.
About AAA Tree Service:
For over 18 year AAA Tree Service has offered clients high quality service at reasonable
costs. We offer a number of services including the fastest, quality stump removal, stump
grinding, tree trimming and tree removal on Long Island. Whether you have an old tree in
your home or need a number of trees or stumps removed from your company’s lot, AAA
Tree Service will be able to meet all of your needs.