10. J o i n e r y D i v i s i o n
Raw Wood Inspection Report
Supplier Name : ..................................................................................................... RWIR-no. : FJD- -IR-
Location
: Supplier’s Yard .......................................................................
Factory for Delivery ref. ...........................................................
Date :
Wood Spices inspected
Species Density Species Density Species Density
Ash, black 540 Douglas Fir 530 Meranti - dark red 700
Ash, white 670 Ebony 960 Oak - Red 700
Birch 670 Iroko 655 Oak - White 750
Beech 700 Red Louro 600 Redwood 450
Cedar, red 380 Mahogany ..................... 495-850 Teak 630
Cherry 580 Maple 755 Walnut 650
The above mentioned densities are in kg/m
3
and are the minimum value for each spices
Kindly select only one species per report and if inspected spice is not mentioned on the above table please specify here ..........................................
Quantities and sizes of wood inspected
Wood
thickness
Total count of
bundles
Average count of
bars per bundle
Average length of
bars
Average width of bars and
count per bundle
Total CFT
2”
3”
Nos Nos m
< 6”
6”-8”
8”-10”
10”-12”
> 12”
x ....... Nos
x ....... Nos
x ....... Nos
x ....... Nos
x ....... Nos
Physical properties
Density test
Sample length Sample width Sample height Sample weight : Result
m m m KG kg/m3
Moisture test
Measurement 1
%
Measurement 2
%
Measurement 3
%
Average
%
Always stab the pins into the side of the wood, never the end or the face.
Visual inspection
Criteria
Grade 1-5 (Higher is better)
Comments
1 2 3 4 5
a. Knots
b. Shake
c. Wane
d. Checks, splits
e. Bowing
f. Crocking
g. Cupping
h. Twisting
Comments:
Inspected by: Signature: Noted by: Signature:
Date : Date :
Fibrex construction Group – Joinery division
J o i n e r y D i v i s i o n
Veneer Inspection Report
Supplier Name : ..................................................................................................... RWIR-no. : FJD- -IR-
Location
: Supplier’s Yard .......................................................................
Factory for Delivery ref. ...........................................................
Date : 12/06/2014
Veneer Species inspected
Ash, black Beech Douglas Fir Mahogany Oak - Red Teak
Ash, white Cedar, red Ebony Maple Oak - White Walnut
Birch Cherry Iroko Meranti Redwood .........................
Description of Veneer inspected
Slicing
Method
Inspected
for Grade
AA : No visible defects
A : Small knots are allowed
B : knots and defects filled, wavy
C : Color variation, knots
D : No limitRift Cut Quarter Cut Crown Cut Rotary Cut
Physical properties
Average
measurements
Sheet Length Sheet Width Thickness Comments
m m mm
Moisture test
Measurement 1
%
Measurement 2
%
Measurement 3
%
Average
%
Visual inspection
Criteria
Grade 1-5 (Higher is better)
Comments
1 2 3 4 5
a. Knots
b. Shake
c. Wane
d. Checks, splits
e. Color variation
f. Repairs
g. Waviness
Comments:
Inspected by: Signature: Noted by: Signature:
Date : Date :
Fibrex construction Group – Joinery division
