These are some of my CAD designs I have done over my academic career

1. Model of Twin
Steam Engine
• This was a self-learning project by
using open source online
resources to learn advanced part
modelling and assembly design
• Modelled more than 50 complex
parts using 2D drawings
• Assembled all parts such that
their relative motion is
constrained and all valves are
operated simultaneously

2. Car Surface
Modelling
• Modelled very complex Audi R8
surfaces using 3-view blueprints
to approximate dimensions
• Used wireframe, surface design
and Generative Surface design
modules of CATIA V5

4. V12 Engine
• Modelled a V12 Engine using
dimension from internet
resources in CATIA V5

5. Lathe Tail-stock
• Modelled a Lathe Tail-stock as a
part of final project for CAD
course at UIC
• Performed Static FEA to verify the
design

7. Bench Vise
• This was another self-learning
project by using open source
online resources
• Applied material and rendered
using PhotoView 360

8. Lemon Squeezer
Surface modelling
• Modelled a Lemon squeezer using
approximate dimensions
• Used surfacing tools for forming
the recessed areas for greater
shape control

10. Wheel Roller
Assembly

11. Excavator Arm
Assembly