Exheat PIH Portable Baptistery Immersion Heaters Water Pool Heating - Spec Sheet
1.
Hazardous Area Process Heat & Control Solutions
www.exheat.com
‘PIH’ Portable Immersion Heater
The EXHEAT ‘PIH’ range of portable immersion heaters are suitable for heating large or small
quantities of liquid, stored in open topped vessels and baths, where permanently installed immersion
heaters are not practical or desirable.
TYPICAL APPLICATIONS
Sterilizing
Drum Heating
Baptismal Pools
Vat Heating
FEATURES
Optional control thermostat
Long life incoloy 825 sheathed rod type elements
Long unheated length for use with low liquid
levels
Wide, stable, self-supporting base
Robust Stainless Steel construction
IP66 Terminal enclosure
PRODUCT DATASHEET
Tel: +44 (0)191 490 1547
Fax: +44 (0)191 477 5371
Email: northernsales@thorneandderrick.co.uk
Website: www.heattracing.co.uk
www.thorneanderrick.co.uk
2.
Hazardous Area Process Heat & Control Solutions
www.exheat.com
Information subject to change without notice
Enclosure Self colour aluminium protected to IP66.
Voltage Standard 240v single phase. Other single phase supplies on request.
Controls Standard Construction – None.
Automatic Construction - Capillary type thermostat.
Immersed
Parts
Element Rod type with Incoloy 825 sheaths.
Rating Standard heater rating 3kW.
Stainless Steel.
Installation We recommend that the electrical supply is protected by an RCD and that the heater
is fully earthed. The element must be fully submerged before being energised.
PRODUCT SPECIFICATION