3. PREFACE
Since last two decades Frames is working with high achievements of success. We knew very well
that the odds were heavily stacked against us. With limited resources, we knew that we could
not beat the competition in terms of products, prices or other shows of force or clout. With a
never-say-die spirit along with complete confidence in UAE, the modern era’s “land of oppor-
tunities”; we are convinced that we could strengthen our position in the market through our
superior services and high level of customer satisfaction by:
• Transparency in approach
• Sharing our knowledge and expertise,
• at the same time learn from others - be
• open to new ideas and suggestions.
• Accepting mistakes gracefully, and
• taking appropriate and timely
• corrective measures.
• Remain committed prior and during a
• project, and most importantly during
• the post-completion period.
• Taking responsibility for the entire process.
• Understanding and accepting the
• philosophy that in the race for
• perfection there cannot be a finish line,
• there is always room for improvement.
“Our Basic approach remains the same, however our working model is customization with con-
sideration across the board: in product, services, interior design proposals, and project manage-
ment”. When I look back, it gives me immense pleasure and pride to note that we have achieved
amazing results – having won and executed many prestigious projects for blue-chip corporates,
signed dealership agreements with the world’s most renowned manufacturers and above all,
retained and expanded our most important asset – our human resources! All of this was only
possible due to our adherence to the aforementioned Policies.
Innovation is synonymous with Frames Doors. We’re an ideal synthesis of technology and dyna-
mism, proudly defining the leading edge. And we are in a state of constant evolution, offering
unparalleled competitiveness and value through efficient, streamlined operations. Our team is
focused on creating the highest quality products – and we consider it to be an asset without
compare.
All that's left to admire are the exceptional results. It's that easy with our modular approach
to customizing and design, creating a door that’s both an attractive, harmonious extension of
your décor, and one you can call your own, has never been easier. We’re also developing new
ways to process estimates with our exclusive Frames Doors Quoting System (FDQS). We’ve
designed our world so that yours is easier to live in, and we’re convinced that better doors will
always lead the way into better buildings.
4. OVERVIEW
Frames interior decor is a multi-faceted interior fit-out, joinery and furnishing specialist in design,
manufacture and install interiors for 5 star hotels, high rise towers, Royal Palaces, shops, banks,
offices, department stores, hospitals, schools & private residences. The workforce includes top
professionals recruited from various parts of the world and a skilled workforce specializing in
high standards of craftsmanship.
“At Frames, we‘re focused on creating materials that you can be proud of holding it...” Much of
our success has stemmed from our ability to clearly understand our client’s business, their core
competence and the team of people who work there. From the onset of any project, our highly
experienced joinery team will study your hierarchy, business and the space in the finest detail,
in order to assess the way in which they work together. Before drawing any conclusions on how
the project should be carried forward, they will probe your work flow, energy and efficiency
levels, observe your clients and your corporate culture in general. Only then can they sit down
with the architects/designers and the project team to plan the optimum solutions for you.
Frames specializes in medium to large contracts in three major sectors, the Hospitality & Leisure,
the Retail & the commercial sectors. Frames combines both mechanization & workmanship for
successful bridging the gap between quality & price, delivery the best quality at a reasonable
price.
Innovation is synonymous with Frames Doors. We’re an ideal synthesis of technology and dyna-
mism, proudly defining the leading edge. And we are in a state of constant evolution, offering
unparalleled competitiveness and value through efficient, streamlined operations. Our team is
focused on creating the highest quality products – and we consider it to be an asset without
compare.
All that's left to admire are the exceptional results. It's that easy with our modular approach
to customizing and design, creating a door that’s both an attractive, harmonious extension of
your décor, and one you can call your own, has never been easier. We’re also developing new
ways to process estimates with our exclusive Frames Doors Quoting System (FDQS). We’ve
designed our world so that yours is easier to live in, and we’re convinced that better doors will
always lead the way into better buildings.
5. PHILOSOPHY
QUALITY
Our Mission...is to position Frames as a world class organization regarded as the pre-eminent
service provider in design, manufacture and install interiors for 5star hotels, high rise towers,
Royal Palaces, shops, banks, offices, department stores, hospitals, schools & private residences
at affordable prices. To always act with complete integrity and transparency, thereby exceeding
customer expectations.
Our Vision ... is to do things the first time by using ultramodern sustainable engineering
techniques and soft-wares for Design, Engineering and Operations in terms of both monetary
value and personnel and to help the UAE in creating happier, healthier environment, by provid-
ing sustainable, functional and aesthetic interior solutions.
Quality control procedures
• Quality inspection for wood for seasoning, even grains and colour, knots
• decay, size of timber and workability.
• Quality control inspection for plywood, MDF, melamine faced MDF,
• veneer, laminate, paint and other related items.
• Quality control of work in machine shop, assembly shop, polishing shop
• etc.
• Once the above procedures are completed it will be the duty of the
• quality controller to issue the final quality check certificate for the
• despatch of the material.
• Once the goods are arrived at site, they are properly inspected by the
• site supervisor and fixed in the site as per the drawings and instructions
• and after completion, site check sheet will be submitted.
Guarantee
• If any shrinkage or warping occurs or other defects appears in the joinery
work before the end of the defects liability period, all the defective work will
be taken down and removed to the entire satisfaction of the
consultant/client at our own cost if the tender clause specifies.
6. TEAM
FRAMES GROUP
MANAGING DIRECTOR
MANAGER
FRAMES TECH
CONT. LLC. SHJ
FRAMES BUILDING
MATERIALS. LLC. DXB
AL MARAGHI BUILDING
MATERIALS TRDG LLC, SHJ
ORGANISATIONAL CHART
ENGINEERING ADMIN FINANCE
SITE
SUPERVISOR
CARPENTERS CARPENTERS
PAINTERS
HELPERS
PAINTERS
HELPERS
FACTORY
SUPERVISOR
STORE KEEPER
MARKETING
ENGINEER
PROCUREMENT
TRANSPORT
DRIVERS
ACCOUNTS
7. PROCESS
Transparency in the approach to work has been the key factor to our efficiency. This has been
achieved by maintaining the chain of communication to a minimum. Therefore our clients will
interact with only one person. “Clarity produces efficiency” With this in mind, we feel that it is
important that our clients understand the standard work flow process at an early stage of the
project to strengthen the communication.
PRE
CONSTRUCTION
POST
CONSTRUCTION
CONSTRUCTION
PRELIMINARY
PROJECT BRIEF
• Concept Design
• Design
• Cost approval
• Finishes
• Detailed drawing
• Render approval
• Technical drawing
preparation
• Documentation on
Satutory approval
SITE INSPECTION
• As built & other
documentation
• Maintenance
SITE MOBILISATION
• Work execution
• Project completion
• Close out formalities
8. SERVICES
CLIENTS &
PROJECTS
Our client portfolio is extensive and diverse, which demonstrates our ability to satisfy their
wide range of needs and requirements. This statement is endorsed by the amount of repeat
interior and refurbishment opportunities we obtain through client’s references. Our business
has built an enviable reputation for delivering joineries on time; every time and all our delivery
teams follow the company’s ethos of being service driven. This ensures that our clients get the
very best that the interior construction industry can offer.
Turn-key Joinery (Design, Statutory Approvals, Fabrication and Installation)
Budget Analysis
Infrastructure Analysis
Contract
Project Management
SL No. Projects Contractors & Consultants Value of Work (AED)
1 Arabian Gate @DSO, Plot 10-
015 Dubai UAE
Square Meter Construction LLC
PO Box:12062 Dubai UAE
Consultant: Eng.Adnan Saffarini
Office
PM: Engr.Gwang Chon
4,570,000.00
2 9 Building Tilal properties, Al
Juwaizea, Sharjah,UAE
Al Marwan General Contracting
LLC
P.O Box:4174 Sharjah UAE
Tel 06-5345222
Consultant: Al Mazaya Eng.Con-
sultant
PM: Mohammed Haytham
1,401,300.00
3 2B + G + 8Typical + 9 Floors
(HC) + Roof + Commercial and
residential building at Al
Qusais, Dubai
Convergent Value Engineering
LLC
PO Box:1769 Dubai UAE
Tel 04-3474441
Consultant: Golden Square Engi-
neering
Consultant
800,450.00
4 2B+G+6 Residential building
at Wadi Al Safa Dubai, UAE
Dubai Walls Constructions LLC
P.O Box:87917 Dubai UAE
Consultant: Emsqure Eng. Con-
sultant
PM:Engr Mahboob
503,410.00
5 Plot No. 1178,Ibtikar Tower, Al
Majaz at Sharjah,UAE
Fajer Al Sharq Construction(FAS-
CO)
Sharjah UAE
Al Mazaya consultants
415,600.00
6 B+G+2 Retail & Resi. Building
on Plot No.614-0319 Ras Al
Khoor
Duabi,UAE
Infinity Noble Construction LLC
P.O Box: 86746 Dubai UAE
Tel 04-2611123
Consultant : Design Centre Archi-
tects
PM:Mr.Iqbal
398,000.00
9. CLIENTS &
PROJECTS
SL No. Projects Contractors & Consultants Value of Work (AED)
7 B+G+10+Gym floor building at
Wadi Al Safa-3, Dubai,UAE
Al Meezan Contracting & Proline
Engi.
Consul.
PO Box:33310 Dubai UAE
350,000.00
8 B+G+12+Gym.Building on Plot
241-359 Al Nahda Dubai,UAE
Jscom Contracting LLC
P.O Box:18473,Dubai UAE
Tel 04-2500252
PM: Engr.Ahmed Abu Egaila
325,700.00
9 B+G+8 Building at Silicon Oa-
sis Dubai UAE
Square Meter Construction LLC
PO Box:12062 Dubai UAE
Consultant: Hadi Archi.Eng Con-
sultant
320,000.00
10 G+1 Villa @5Nos At Umm
Suqem Dubai UAE
Chicago Contracting LLC
Dubai UAE
Al Kawaja Engi. Consultant
200,000.00
11 Al Furjan Villas, Dubai,UAE Al Hamy Metals Factory LLC
P.O Box:4151 Sharjah UAE
189,900.00
12 G+1, 249 Villas ,Al Furjan Villas
and Terrace House ,Du-
bai,UAE
Hitch Metallic Decors FZE
P.O Box 8778 Sharjah UAE
Tel 06-5573592
176,700.00
13 Building at Al Majaz, Shar-
jah,UAE
Baniyas Building Cont LLC
P.O Box:38912 Sharjah UAE
Tel 06-5668346
PM: Mr.Anwar Basha
167,100.00
14 Plot 129 ,Al Nahda Building
128 & 129,Sharjah UAE
Qwaed Contracting LLC
P.O Box:9291 Dubai UAE
153,000.00
15 G+5 floor Building at Butina,
Sharjah UAE
Eastern Internatioal
P.O Box:1596 Sharjah UAE
150,000.00
16 B+G+7+R Residential and Re-
tail ldg.. at Furjan Dubai UAE
Diamond Real Estate Developer
Dubai UAE
120,500.00
17 Plot No.432 At Al Nahda
Sharjah UAE
Naseriya Contracting
P.O Box:482, Sharjah UAE
Design House Consultancy
120,000.00
18 Hotel Ananthara Dubai, UAE
(Maintenance works)
Hitch Metallic Decors FZE
P.O Box 8778 Sharjah UAE
Tel 06-5573592
107,100.00
19 B+G+6 Building on Plot
No.IC3-G-28 Warson Dubai,U.
AE
(Wardrobe works)
Injaz Al Madina Bulding Cont LLC
14-11Office, Sit Tower, Dubai UAE
PM: Engr Nabil
105,000.00
20 Souk Warsan Village , Dubai
UAE
(Wooden Handrail)
Hitech Mettalic Decors FZE
P.O Box:8778 Sharjah UAE
Tel 06-5573592
95,550.00
21 G+3 Building M15 at Muwailah
Sharjah , UAE
Baniyas Building Cont LLC
P.O Box:38912 Sharjah UAE
Tel 06-5668346
Consultant: Orchid Engineering
Con
85,000.00
22 JVC1 P 103 , Jumeirah Village
Dubai UAE
Infinity Noble Construction LLC
P.O Box: 86746 Dubai UAE
Tel 04-2611123
PM:Mr.Iqbal
30,700.00
23 G+1 Villa at Dubai,UAE Rwad Al mustaqbal Bldg Cont
LLC
Dubai UAE
20,750.00
24 Shed + Mezzanine, Industrial
area 18, Sharjah,UAE
Baniyas Building Cont LLC
Tel 06-5668346PM:
Mr.Anwar Basha
14,350.00
10. PROJECTS
gn Door
uilding at Ras al khor Dubai
s
AL juwaize
Sharjah
UAE
25
Square Meter Construction LLC
Location :
Arabian Gate, Silicon Oasis
Dubai , UAE
Frames
22
Ibtikar Tower
Location: AL Majaz
Sharjah
UAE
24
Convergent Value Engineering LLc
Location:
AL Qusais
Dubai
UAE
Entrance Design Door
RESIDENTIAL BUILDING AT RAS AL KHOR DUBAI
TILAL PROPERTIES
SQUARE METER CONSTRUCTION LLC
IBTIKAR TOWER
CONVERGENT VALUE ENGINEERING LLC