The document describes the process of removing a 72B cast containing remote handled transuranic waste from a trailer and preparing it for shipping. Key steps included: removing impact limiters from the cast; using a lifting yoke to upright and remove the cast from the trailer; moving the cast to a work platform; removing lids and checking for contamination; loading a radioactive load container into the cast; and reinstalling the cast and impact limiters onto the trailer for shipping.

1. 72 B Cast Operations at INTEC
Richard S. Leavitt

2. Backing trailer and cast
into building 659 at INTEC
Setting up trailer for
removal of impact limiters
Shipping Remote Handled Transuranic Waste

3. Impact limiters removed
and placed in cradle
Hydraulics attached in
preparation for up righting of cast
Shipping Remote Handled Transuranic Waste

4. Cast with Impact limiters
removed
Lifting yoke use for removal
of 72B cast from trailer
Shipping Remote Handled Transuranic Waste

5. 72B cast in up right
position
Cast engaged with lifting
yoke and being removed
from trailer
Shipping Remote Handled Transuranic Waste

6. 72B cast being moved to
work platform
72B cast being installed in
work platform
Shipping Remote Handled Transuranic Waste

7. Work platform center
being reinstalled
ICV lid being removed
from cast
Shipping Remote Handled Transuranic Waste

8. Rad-con personnel check
cast for contamination ICV lid bolt being removed
Shipping Remote Handled Transuranic Waste

9. Radcon personnel checking
ICV lid for contamination
Radcon personnel checking inside
of cast for contamination
Shipping Remote Handled Transuranic Waste

10. Loading of RLC into cast
Leak test ICV and OCV lid
of cast
Shipping Remote Handled Transuranic Waste

11. Installing of leak tested
cast back onto trailer
Install of impact limiters
onto cast
Shipping Remote Handled Transuranic Waste

12. Loaded 72B cast
Removal of 72B cast from
building 659 at INTEC
Shipping Remote Handled Transuranic Waste