1. Raymond Dane
324 North Concord Rd. Concord, MI 49224
Phone: 1-517-612-7575
E-mail: Daneray6@gmail.com
Objectives
Looking to obtain a position as a CNC programmer/Machinist.
Education
PrecisionMachining/CAM - JacksonArea Career Center (May 2009)
High School Diploma- Western High School (May 2009)
Experience
CNC Machinist/Programmer (April 2014 – Present)
Jorgensen Steel Machining and Fabrication, Inc. (166 Spires Parkway, Tekonsha , MI 49092)
 Use of Mastercam CAD-CAM software to make 3D models from blueprints
 Use of MastercamCAD-CAM software to program parts from rawmaterial to finish product.
 Use of DelcamPowermill CAD-CAM software to programparts that have extensive 3D work such as
molds,stamps, and die details.
 Use of BOBCAD to draw 2D drawings to use for programming at the controller of Wire EDM and Proto
Trak SMX
 Conversational programming,CAM programming, use of Tool lifemanagement
 Extensive use of GD&T, G codes and M codes.
 Fixture design and build for production parts that simplify processes to reduce time and improve
quality of parts produced.
 PPAP process
 Set up, program, and operate a horizontal 4 Axis Okuma MA500-HII with a OSP300M controller with a
rotary table, Renishawtouch probe, and an automatic tool changer.
 Set up, program, and operate a vertical 3 Axis OKK VM5II with a Blum Touch Probe and Tool Setting
laser,automatic tool changer.
 Set up, program, and operate a vertical 3 Axis MAZAK 510CII with Renishawtouch probe and tool
setter, Mazatrol programming.
 Regular use of various measuringand indicatingtools such asMicrometer, Calipers,TestIndicators,etc.
 Frequent useof intricateblueprints to machineand check parts to be sure they are correct dimensions
and quality for customer satisfaction.
CNC Machinist/Programmer (September 2010 – January 2014)
American Tooling Center (4111 Mt.Hope Rd. Grass Lake, MI 49240)
 Use of Smirt DieNC CAD/CAM software to program and cut parts to design.
 Use of CAD/CAM software to check importantdimensions,locations,and sizes.

2.  Resume: Raymond
 Page 2 | RayDane6@gmail.com
 Have extensive use of various Gcodes and M codes for hand writingprograms to bore, drill,tap,face
mill,circlemill,etc.
 Set up, program, and operate a horizontal 5 Axis Mecof MecMill with Heidenhain controls that used a
rotary table, touch off laser,automatic tool changer, and 2 heads for operation (Conical head and Angle
head).
 Set up, program, and operate a vertical 5 Axis Okuma MCR-A bridge mill with an automatic tool
changer, touch off probe, and 4 heads for operation (Vertical,Vertical high speed, 90° head, and a 1°
rotation Angle head).
 Set up, program, and operate a vertical 3 Axis OKK VM7 to make detailed and intricateparts.
Constructionworker(September 2009– September 2010)
J.B Dane Construction (324 N. Concord Rd. Albion, MI 49224)
 Operation of heavy machinery such as a skid steer, front end loader,and dump truck.
 Use of fractional and decimal measurements to achievecorrect dimensions for required design.
 Understanding of complex blue prints to make desired design of houses or rooms.
 Ability to locateand fix problems that had been looked over by engineers and designers.
 Maintain and fix any equipment issues thatwould occur before, during,or after job has been acquired.
 Use of surveyor’s transitlevel to achieveproper grade for water runoff and to ensure building is level.
Skills
 Hard working.
 Excels in team environment.
 Strong interpersonal skills.
 Goal oriented.
 Leadership skills.
 Positiveattitude.
 Eager to expand and improve knowledge.
1`