2014 12 22 Rebak Publications

1
R. B. Rebak Papers Published in Journals, Book Chapters and Conference Proceedings
in approximate descending chronological order down from December 2014
1. A. Mishra, D. Richesin, and R. B. Rebak, “Localized Corrosion Study of Alloys 718,
625 and C-22HS in Aggressive Corrosive Environments,” Paper C2015-5802,
Corrosion/2015 Conference (NACE International, Houston, TX 2015)
2. Y. J. Kim, F. Wagenbaugh, T. B. Jurewicz, R. J. Blair, and R. B. Rebak, “Environmental
Behavior of Light Water Reactor Accident Tolerant Candidate Cladding Materials under
Design Conditions,” Paper C2015-5817, Corrosion/2015 Conference (NACE
International, Houston, TX 2015)
3. E. C. Hornus, M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Effect of
Temperature on the Repassivation Kinetics of Crevice-Corroded Nickel Base Alloys,”
Paper C2015-5739, Corrosion/2015 Conference (NACE International, Houston, TX
2015)
4. M. Kappes, M. Iannuzzi, R. M. Carranza, R. J. Blair, and R. B. Rebak, “Electrochemical
Behavior of Nickel-Containing LAS in Deaerated TM0177 Solution A,” Paper C2015-
5818, Corrosion/2015 Conference (NACE International, Houston, TX 2015)
5. M. Miyagusuku, R. M. Carranza, and R. B. Rebak, “Inhibition Mechanism of Phosphate
Ions on Chloride Induced Crevice Corrosion of Alloy 22,” Corrosion Journal (to be
published)
6. P. A. Martinez, E. C. Hornus, M. A. Rodriguez, R. M. Carranza, and R. B. Rebak,
“Crevice corrosion resistance of super-austenitic and super-duplex stainless steels in
chloride solutions,” Paper C2015-5740, Corrosion/2015 Conference (NACE
7. E. C. Hornus, C. M. Giordano, M. A. Rodríguez, R. M. Carranza, and R. B. Rebak,
“Effect of Temperature on the Crevice Corrosion of Nickel Alloys Containing Chromium
and Molybdenum,” doi: 10.1149/2.0431503jes, J. Electrochem. Soc., vol. 162, issue 3,
C105-C113 (2015)
8. N. S. Zadorozne, C. M. Giordano, R. B. Rebak, A. E. Ares, R. M. Carranza, “Anodic
Stress Corrosion Cracking Susceptibility of Nickel and Nickel-Chromium Alloys
Containing Molybdenum and Iron in Bicarbonate plus Chloride Solutions at 90°C,”
Corrosion Journal (February 2015)
9. R. B. Rebak, “Nuclear Applications of Oxide Dispersion Strengthened and Nano-
Featured Alloys: An Introduction,” JOM, Vol. 66, No. 12, 2014
10. R. B. Rebak “Advanced Steels for Accident Tolerant Fuel Cladding in Current Light
Water Reactors,” TMS John Wiley and Sons, proceedings from the conference Energy
Materials 2014, Xi’an, China, 04-06 November 2014.
11. R. B. Rebak, P. L. Andresen, Y. J. Kim, and E. J. Dolley, “Characterization of Advanced
Steels as Accident Tolerant Fuel Cladding for Light Water Reactors,” in Proceedings of

2
the IAEA Technical Meeting “Accident Tolerant Fuel Concepts For Light Water
Reactors” Oak Ridge, TN, 13-16 October 2014.
12. R. B. Rebak, M. Rincon Ortiz, M. Iannuzzi, M. Kappes, A. Mishra, and M. A.
Rodriguez, “Effect of thermal treatment on the localized corrosion behaviour of alloy
718,“ Paper 7284, Eurocorr 2014, Pisa, Italy, 08-12 September 2014.
13. R. B. Rebak, and E. J. Dolley, “Effect of Superheated Steam on the Corrosion Behaviour
of Advanced Steels Proposed as Accident Tolerant Fuel Cladding,“ Paper 7283, Eurocorr
2014, Pisa, Italy, 08-12 September 2014.
14. M. Kappes, M. Iannuzzi, R. B. Rebak, and R. M. Carranza, “Sulfide stress cracking of
nickel-containing low-alloy steels,” Corrosion Reviews, 32(3-4): 101–128 (2014)
15. P. L. Andresen, R. B. Rebak, and E. J. Dolley “SCC Resistance of Irradiated and
Unirradiated High Cr Ferritic Steels,” Paper C2014-3760, Corrosion/2014 Conference
(NACE International, Houston, TX 2014)
16. M. Rincon Ortiz, M. Iannuzzi, M. Kappes, R. B. Rebak, and R. M. Carranza “Selecting
corrosion resistant alloys for seawater applications,” Research in Progress Symposium,
Paper C-2014-5139, Corrosion/2014 Conference (NACE International, Houston, TX
2014)
17. E. J. Dolley, P. L. Andresen, M. M. Morra, X. Lou, and R. B. Rebak, “Cracking
Resistance of Chromium Rich Alloys in High Temperature Water,” Paper C2014-4293,
Corrosion/2014 Conference (NACE International, Houston, TX 2014)
18. R. B. Rebak, R. J. Blair, P. J Martiniano, F. Wagenbaugh, and E. J. Dolley, “Resistance
of Advanced Steels to Reaction with High Temperature Steam as Accident Tolerant Fuel
Cladding Materials,” Paper C2014-3924, Corrosion/2014 Conference (NACE
19. X. Lou and R. B. Rebak, “Corrosion and Flow Accelerated Corrosion of Candidate
Coatings for Seawater Cooled Heat Exchanger,” Paper C2014-4328, Corrosion/2014
Conference (NACE International, Houston, TX 2014)
20. M. L. Ungaro, M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Electrochemical
Noise Study of Chloride-Induced Crevice Corrosion on Ni-Cr-Mo Alloys,” Paper C2014-
3904, Corrosion/2014 Conference (NACE International, Houston, TX 2014)
21. R. B. Rebak, “Materials in Nuclear Waste Disposition,” JOM, Vol. 66, No. 3, 2014
22. N. S. Zadorozne, C. M. Giordano, R. M. Carranza, A. E. Ares, and R. B. Rebak, “Stress
Corrosion Cracking of Nickel Alloys in Bicarbonate Solutions,” Paper 1163 in
proceedings of Eurocorr 2013, Estoril, Portugal, 01-05 September 2013
23. J. F. Flores, E. J. Dolley, and R. B. Rebak, “Environmental and Mechanical Behavior of
Ferritic Chromium Steels in High Temperature Water and Steam,” Paper 3437 in 16th
Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors,
Asheville, NC, USA, 11-15 August 2013
24. E. J. Dolley, P. L. Andresen, R. B. Rebak, M. M. Morra, X. Lou, “SCC Performance of
Alternative BWR Structural Materials with Varying Chromium Concentrations,” Paper

3
3124 in 16th Environmental Degradation of Materials in Nuclear Power Systems – Water
Reactors, Asheville, NC, USA, 11-15 August 2013
25. R. B. Rebak, “Introduction to Energy Production,” JOM, Vol. 65, No. 8, 2013
26. M. Rincon Ortiz, M. A. Rodríguez, R. M. Carranza, and R. B. Rebak, “Oxyanions as in-
hibitors of chloride-induced crevice corrosion of Alloy 22,” Corrosion Science, vol. 68
March, 2013. p. 72-83
27. N. S. Zadorozne, C. M. Giordano, R. M. Carranza, A. E. Ares, and R. B. Rebak,
“Susceptibility of Nickel Alloys to Environmental Cracking in Bicarbonate Containing
Aqueous Solutions,” Paper 3438 in in 16th Environmental Degradation of Materials in
Nuclear Power Systems – Water Reactors, Asheville, NC, USA, 11-15 August 2013
28. M. A. Othon, M. M. Morra, S. Ooki, and R. B. Rebak, “Assessing Residual Strains in
Nuclear Power Reactor Internal Components Weld Mockups of Nickel Alloys using
EBSD,” Paper PVP2013-97350, in 2013 ASME PVP Conference Integrity Issues in SCC
and Corrosion Fatigue, 14-18 July 2013, Paris, France
29. R. B. Rebak, “Resistance of Ferritic Steels to Stress Corrosion Cracking in High
Temperature Water,” Paper PVP2013-97352, in 2013 ASME PVP Conference Integrity
Issues in SCC and Corrosion Fatigue, 14-18 July 2013, Paris, France
“Effect of Temperature on Crevice Corrosion Susceptibility of Nickel Alloys for Nuclear
Repositories,” Paper 2504, , Corrosion/2013, Orlando, FL, 17-21 March 2013 (NACE
International, Houston TX)
31. M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Mechanisms of inhibition of the
chloride-induced crevice corrosion of Alloy 22,” Paper 2633, Corrosion/2013, Orlando,
FL, 17-21 March 2013 (NACE International, Houston TX).
32. R. B. Rebak, “Susceptibility of Engineering Alloys to Environmentally Assisted
Cracking in Nuclear Waste Repositories Environments,” Paper 2597, Corrosion/2013,
Orlando, FL, 17-21 March 2013 (NACE International, Houston TX).
33. R. B. Rebak, P. L. Andresen, R. J. Blair and E. J. Dolley, “Environmentally Assisted
Cracking Resistant Ferritic Steels for Light Water Reactor Applications,” Paper 2599,
Corrosion/2013, Orlando, FL, 17-21 March 2013 (NACE International, Houston TX).
“Effect of Temperature on the Crevice Corrosion Susceptibility of Passivating Nickel
Alloys,” in Ceramic Transactions Volume 241, Advances in Materials Science for
Environmental and Energy Technologies II, proceedings from 2012 Materials Science
and Technology (MS&T’12) symposia, editors Josef Matyas, Tatsuki Ohji, Xingbo Liu,
Mariappan Paranthaman, Ram Devanathan, Kevin Fox, Mrityunjay Singh, and Winnie
Wong-Ng, (Ceramic Transactions, July 2013).
35. R. B. Rebak, “Environmentally Assisted Cracking of Nickel Alloys in Nuclear Power
Generation and Nuclear Waste Disposal,” Paper 1712, Eurocorr 2012, Istanbul, Turkey,
09-13 September 2012

4
36. N. S. Zadorozne, C. M. Giordano, M. A. Rodríguez, R. M. Carranza, and R. B. Rebak,
“Crevice Corrosion Kinetics of Nickel Alloys Bearing Chromium and Molybdenum,”
Electrochimica Acta, vol. 76 August 1, 2012. p. 94-101
37. R. B. Rebak, “Stress Corrosion Cracking,” book chapter in “Corrosion in Nuclear Waste
Systems,” edited by F. King and to be published by John Wiley & Sons, Inc
38. R. B. Rebak, “Crystalline Materials: Nickel,” book chapter 7 in Environmental
Degradation of Advanced and Traditional Engineering Materials, edited by L. H. Hihara,
R. P. I. Adler and R. M. Latanision, accepted for publication by Taylor & Francis Books,
Inc.
39. M. Miyagusuku, R. M. Carranza, R. B. Rebak, “Estudio de productos de corrosión de la
aleación 22 por SEM/EDS,” SAMIC 2012, 2do Congreso Argentino de Microscopía, 18
a 20 de Abril 2012, Buenos Aires, Argentina
40. P. L. Andresen, T. B. Jurewicz, and R. B. Rebak, “Stress Corrosion Cracking Resistance
of Ferritic Chromium Steels in High Temperature Water,” Paper C2012-0001181,
Corrosion/2012, Salt Lake City - UT, 11-15 March 2012 (NACE International, Houston
TX)
41. N. S. Zadorozne, R. M. Carranza, C. M. Giordano, A. E. Ares, and R. B. Rebak,
“Anodic Behavior of Nickel base Alloys in Media Containing Bicarbonate and Chloride
Ions,” Paper C2012-0001413, Corrosion/2012, Salt Lake City - UT, 11-15 March 2012
(NACE International, Houston TX)
42. G. Sundararajan, A. J. Kulkarni, and R. B. Rebak, “Electrochemical and Environmental
Behavior of Protective Coatings,” Paper C2012-0001388, Corrosion/2012, Salt Lake City
- UT, 11-15 March 2012 (NACE International, Houston TX)
43. S. Sosa Haudet, M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Effect of Alloy
Composition on the Crevice Corrosion Resistance of Nickel Alloys,” Paper C2012-
0001455, Corrosion/2012, Salt Lake City - UT, 11-15 March 2012 (NACE International,
Houston TX)
44. R. B. Rebak, “Sulfidic Corrosion in Refineries – A Review,” Corrosion Reviews, Vol.
29, pp. 123–133 (2011)
45. N. S. Zadorozne, R. M. Carranza, C. M. Giordano, A. E. Ares, and R. B. Rebak, “Effect
of the Composition of Nickel Alloys on the Anodic Behavior in Aqueous Solutions of
Chloride and Bicarbonate,” Vol. 1475, XXXV International Symposium "Scientific Basis
for Nuclear Waste Management,” Materials Research Society, Buenos Aires, Argentina,
October 2 - 7, 2011
46. R. B. Rebak, “Environmentally Assisted Cracking Research of Engineering Alloys for
Nuclear Waste Repository Containers,” Vol. 1475, XXXV International Symposium
"Scientific Basis for Nuclear Waste Management,” Materials Research Society, Buenos
Aires, Argentina, October 2 - 7, 2011
47. M. Rincon Ortiz, M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Efficiency of
inhibitors for chloride-induced crevice corrosion of Alloy 22,” Vol. 1475, XXXV
International Symposium "Scientific Basis for Nuclear Waste Management,” Materials
Research Society, Buenos Aires, Argentina, October 2 - 7, 2011

5
48. M. Miyagusuku, R. M. Carranza, and R. B. Rebak, “Phosphate Inhibition Effect on
Chloride-Induced Crevice Corrosion of Alloy 22,” Vol. 1475, XXXV International
Symposium "Scientific Basis for Nuclear Waste Management,” Materials Research
Society, Buenos Aires, Argentina, October 2 - 7, 2011
49. R. B. Rebak, “Stress Corrosion Cracking of Nickel Based Alloys,” Chapter 7 in Stress
Corrosion Cracking, edited by V.S. Raja, T. Shoji and S. Lynch, pp. 273-306 (Woodhead
Publishing, Oxford, 2011).
50. M. Miyagusuku, R. M. Carranza, and R. B. Rebak, “Inhibition Effect of Phosphate Ions
on Crevice Corrosion of Alloy 22,” Paper 11202 in Corrosion/2011, 13-17 March 2011
Houston, TX (NACE International, 2011: Houston, TX)
51. J. Kaneda, M. Koshiishi, M. M. Morra, and R. B. Rebak, “Microstructural
Characterization of Surface Modified Alloy 82 Welds Regarding Susceptibility to
Environmentally Assisted Cracking,” Paper 11213 in Corrosion/2011, 13-17 March 2011
Houston, TX (NACE International, 2011: Houston, TX)
52. R. B. Rebak, “Electrochemical Behavior of Silicon Modified Stainless Steels in High
Temperature,” Paper 11214 in Corrosion/2011, 13-17 March 2011 Houston, TX (NACE
International, 2011: Houston, TX)
53. M. Rincón Ortíz, M. A. Rodríguez, R. M. Carranza, and R. B. Rebak, “Efficiency of
Inhibitors of Chloride-Induced Crevice Corrosion of a Ni-Cr-Mo Alloy,” Paper 11204 in
Corrosion/2011, 13-17 March 2011 Houston, TX (NACE International, 2011: Houston,
TX)
54. C. M. Giordano, M. Rincon Ortız, M. A. Rodrıguez, R. M. Carranza, and R. B. Rebak,
“Crevice Corrosion Testing Methods for Measuring Repassivation Potential of Alloy 22,”
Corrosion Engineering, Science and Technology, Vol. 46, No 2, pp.129-133 (2011).
55. R. B. Rebak, “Materials and Corrosion Research in the Yucca Mountain Project,” The
Electrochemical Society Transactions, pp. 1-14, 218th ECS Meeting Vol. 33, Issue 25 -
October 10 - 15, 2010 , Las Vegas, NV “Corrosion Issues in Nuclear Waste Storage: A
Symposium in Honor of the 65th Birthday of David Shoesmith,” Editors: J. Noël, X. He,
and Z. Aguilar.
56. R. B. Rebak, “Environmental Degradation of Engineered Barrier Materials in Nuclear
Waste Repositories,” Chapter 36 in Uhlig’s Handbook, edited by W. Revie, pp. 503-516
(Wiley & Sons 2011).
57. M. Rincon Ortiz, M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Determination of
crevice corrosion susceptibility of Alloy 22 using different electrochemical techniques,”
in Scientific Basis for Nuclear Waste Management XXXIV, Vol. 1265, pp. 203-208
(Materials Research Society, Warrendale, PA 2010).
58. R. B. Rebak, “Advances in Materials Corrosion Research in the Yucca Mountain
Project,” Chapter 21 in Advances in Materials Science for Environmental and Nuclear
Technology II, Vol. 227, Editors; K. Sundaram, K. Fox, T. Ohji, and E. Hoffman,
Ceramic Transactions (2011).

6
59. N. S. Zadorozne, C. M. Giordano, M. A. Rodriguez, R. M. Carranza, N. S. Meck, and R.
B. Rebak, “Effect of age hardening on the crevice corrosion resistance of Ni Cr Mo
alloys,” published by the European Federation of Corrosion Event 324 (2010)
60. R. B. Rebak, “Environmentally Assisted Cracking Behavior of Nickel Alloys in Oil and
Gas Applications: A Review,” published by the European Federation of Corrosion Event
324 (2010)
61. M. Rincon Ortiz, M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Determination of
the Crevice Corrosion Stabilization and Repassivation Potentials of a Corrosion Resistant
Alloy,” Corrosion, Vol. 66, No. 10, pp. 105002-1 to 105002-12 (2010)
62. Y. -J. Kim, R. B. Rebak, Y.-P. Lin, D. Lutz, D. Crawford, A. Kucuk, and B. Cheng,
“Photoelectrochemical Investigation of Radiation-Enhanced Shadow Corrosion
Phenomenon,” Journal of ASTM International, Vol. 7, No. 7, Paper ID JAI102952 (2010)
63. N. S. Zadorozne, R. M. Carranza, M. A. Rodriguez, N. S. Meck, and R. B. Rebak,
“Corrosion resistance of Ni-Cr-Mo and Ni-Mo-Cr alloys in different metallurgical
conditions,” Paper 10236 in Corrosion/2010, 14-18 March 2010 San Antonio, TX
(NACE International, 2010: Houston, TX)
64. M. Rincon Ortiz, M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Crevice
Corrosion Repassivation of Alloy 22 in Chloride Solutions,” Paper 10237 in
Corrosion/2010, 14-18 March 2010 San Antonio, TX (NACE International, 2010:
Houston, TX)
65. M. Miyagusuku, R. B. Rebak, and R. M. Carranza, “The Effect of Phosphate Ions on the
Corrosion Behavior of Alloy 22,” Paper 10238 in Corrosion/2010, 14-18 March 2010 San
Antonio, TX (NACE International, 2010: Houston, TX)
66. P. H. Chou, P. L. Andresen, M. L. Pollick, and R. B. Rebak, “Repassivation Behavior
and Stress Corrosion Cracking Susceptibility of Stainless Steels Containing Silicon,”
Paper 10285 in Corrosion/2010, 14-18 March 2010 San Antonio, TX (NACE
International, 2010: Houston, TX)
67. M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Effect of pH and Temperature on
the Corrosion Potential of Alloy 22 in Aerated Solutions” Paper 10240 in
Corrosion/2010, 14-18 March 2010 San Antonio, TX (NACE International, 2010:
Houston, TX)
68. R. B. Rebak, “Comparative Nuclear Power Plant Performance of Stabilized and Non-
Stabilized Austenitic Stainless Steels,” in 2010 TMS Annual Meeting Seattle, WA, 14-18
February 2010
69. M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Effect of Potential on Crevice
Corrosion Kinetics of Alloy 22,” Corrosion, Vol. 66, No. 1, pp. 015007-015007-14
(2010)
70. M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Passivation and Depassivation of
Alloy 22 in Acidic Chloride Solutions,” Journal of The Electrochemical Society, Vol.
157 No. 1, pp.C1-C8 (2010)

7
71. R. B. Rebak, “Materials for the nuclear renaissance: Foreword,” Metallurgical and
Materials Transactions A, Vol. 40, No. 12, pp. 2802 (2009)
72. P. L. Andresen, P. H. Chou, M. M. Morra, J. L. Nelson, and R. B. Rebak,
“Microstructural and stress corrosion cracking characteristics of austenitic stainless steels
containing silicon,” Metallurgical and Materials Transactions A, Vol. 40, No. 12, pp.
2824-2836 (2009)
73. R. M. Carranza, M. Miyagusuku, and R. B. Rebak, “Efecto Inhibidor de los Iones
Fosfatos en la Corrosion de la Aleacion 22,” in proceedings of the 9th
International
Congress of Materials organized by the Sociedad Argentina de Materiales (SAM) and the
Sociedad Chilena de Materiales (SOCHIM), 19-23 October 2009, Buenos Aires,
Argentina
74. P. L. Andresen, P. H. Chou, M. L. Pollick, J. L. Nelson, and R. B. Rebak, “Passivation
Characteristics of Stainless Steels Containing Silicon,” Paper 203007 in the proceedings
of the 14th
International Conference on Environmental Degradation of Materials in
Nuclear Power Systems-Water Reactors, 23-27 August 2009 in Virginia Beach, VA (to
be published by the American Nuclear Society)
75. R. M. Carranza, M. Rincón Ortíz, M. A. Rodríguez, and R. B. Rebak, “Corrosion
Resistance of Alloy 22 in Chloride Plus Silicate Solutions,” Paper 203176 in the
proceedings of the 14th
International Conference on Environmental Degradation of
Materials in Nuclear Power Systems-Water Reactors, 23-27 August 2009 in Virginia
Beach, VA (to be published by the American Nuclear Society)
76. R. B. Rebak, Y.-P. Lin, and Y.-J. Kim, “Review on Electrochemical Corrosion of
Zirconium Alloys in High Temperature Water,” in the proceedings of the 14th
International Conference on Environmental Degradation of Materials in Nuclear Power
Systems-Water Reactors, 23-27 August 2009, Virginia Beach, VA, 2; 1400-1406
(American Nuclear Society, 2009)
77. J. Farmer, J.-S. Choi, C. Saw, J. Haslam, D. Day, P. Hailey, T. Lian, R. Rebak, J.
Perepezko, J. Payer, D. Branagan, B. Beardsley, A. D'Amato, L. Aprigliano, “Iron-Based
amorphous metals: High-performance corrosion-resistant material development,”
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,
Vol. 40, No. 6, pp. 1289-1305 (2009)
78. R. M. Carranza and R. B. Rebak, “Anionic and Cationic Effects on the Crevice
Corrosion Susceptibility of Alloy 22,” in Scientific Basis for Nuclear Waste Management
XXXIII, Vol. 1193, pp. 569-576 (Materials Research Society, Warrendale, PA 2009).
79. R. B. Rebak, “Corrosion testing of nickel and titanium alloys for nuclear waste
disposition,” Corrosion, 65, No. 4, pp. 252-271 (2009)
80. R. M. Carranza, C. M. Giordano, M. A. Rodriguez and R. B. Rebak, “Electrochemical
Methods for Repassivation Potential Measurements,” in Corrosion/2009 NACE
International Conference and Exhibition, 22-26 March 2009 in Atlanta, GA (NACE
International, 2009: Houston TX)
81. R. B. Rebak; R. M. Carranza; M. A. Rodriguez, “The Corrosion Potential of Welded and
Thermally Aged Alloy 22 in Aerated Aqueous Solutions,” Paper 09429 in

8
Corrosion/2009 NACE International Conference and Exhibition, 22-26 March 2009 in
Atlanta, GA (NACE International, 2009: Houston TX)
82. Y.-J. Kim; and R. B. Rebak, “Photoelectrochemistry of Zirconium Alloys in High
Temperature Water,” Paper 09417 in Corrosion/2009 NACE International Conference
and Exhibition, 22-26 March 2009 in Atlanta, GA
83. M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Crevice Corrosion of Alloy 22 at
the Open Circuit Potential in Hot Chloride Solutions,” in Corrosion/2009, 22-26 March
2009 in Atlanta, GA (NACE International, 2009: Houston TX)
84. R. B. Rebak, “Stifling of Crevice Corrosion in Alloy 22 During Constant Potential
Tests,” ASME Journal of Pressure Vessel Technology, February 2009, Vol. 131, Issue 1
85. N. C. Hyatt, D. A. Pickett, and R. B. Rebak, “Materials Research Society Symposium Q
Scientific Basis for Nuclear Waste Management Proceedings: Preface,” Vol. 1124, pp.
xvii (Materials Research Society, 2009; Warrendale, PA)
86. R. B. Rebak, “General Corrosion Behavior of N06022 in Super Concentrated Brines at
Temperatures Higher than 100°C,” paper Q9.6 presented at the XXXII Symposium on
Scientific Basis for Nuclear Waste Management as part of the Fall 2008 MRS meeting,
Boston 01-05 December 2008, Vol. 1124, pp. 473-480 (Materials Research Society,
2009; Warrendale, PA)
87. M. A. Rodríguez, R. M. Carranza, and R. B. Rebak, “Effect of Fluoride Ions on the
Passivity and Chloride-Induced Crevice Corrosion of Alloy 22,” paper Q9.8 presented at
the XXXII Symposium on Scientific Basis for Nuclear Waste Management as part of the
Fall 2008 MRS meeting, Boston 01-05 December 2008, Vol. 1124, pp. 487-492
(Materials Research Society, 2009; Warrendale, PA)
88. K. G. Mon and R. B. Rebak, “Effect of Chemistry Variations of Wrought N06022 on the
Repassivation Potential in 1 M NaCl at 90°C,” Paper PVP2008-61269 in the proceedings
of the PVP2008 ASME Pressure Vessels and Piping Division Conference, 27-31 July
2008, Chicago, IL (ASME, 2008, New York, NY)
89. R. B. Rebak, “The Long-Term Environmental Degradation of Zirconium Alloys in
Contact with Spent Nuclear Fuel – A Review,” Paper PVP2008-61272 in the proceedings
of the PVP2008 ASME Pressure Vessels and Piping Division Conference, 27-31 July
2008, Chicago, IL (ASME, 2008, New York, NY)
90. R. M. Carranza, C. M. Giordano, M. A. Rodríguez, and R. B. Rebak, “Effect of Organic
Acid Additions on the General and Localized Corrosion Susceptibility of Alloy 22 in
Chloride Solutions,” Paper 08578 in Corrosion/2008 Conference and Exhibition, 16-20
March 2008 in New Orleans, LA (NACE International, 2008: Houston, TX)
91. R. M. Carranza, M. A. Rodríguez, and R. B. Rebak, “Anodic and Cathodic Behavior of
Mill Annealed and Topologically Closed Packed Alloy 22 in Chloride Solutions,” Paper
08579 in Corrosion/2008 Conference and Exhibition, 16-20 March 2008 in New Orleans,
LA (NACE International, 2008: Houston, TX)
92. R. M. Carranza, C. M. Giordano, M. A. Rodriguez, and R. B. Rebak, “Effect of weak
acid additions on the general and localized corrosion susceptibility of alloy 22 in chloride
solutions,” in Symposium Scientific Basis for Nuclear Waste Management XXXI,

9
Materials Research Society Symposium Proceedings, Vol. 1107, pp. 511-518 (MRS,
2008: Warrendale, PA)
93. R. B. Rebak , G. O. Ilevbare, and R. M. Carranza, “Repassivation potential of Alloy 22
in sodium and calcium chloride brines,” in Symposium Scientific Basis for Nuclear
Waste Management XXXI, Materials Research Society Symposium Proceedings, Vol.
1107, pp. 511-518 (MRS, 2008: Warrendale, PA)
94. T. Lian, G. E. Gdowski, P. D. Hailey, and R. B. Rebak, “Crevice corrosion resistance of
Alloy 22 in high-nitrate, high-temperature dust deliquescence environments,” Corrosion,
Vol. 64, No. 7, pp. 613-623 (2008)
95. D. V. Fix and R. B. Rebak, “The long-term corrosion test facility at Lawrence Livermore
National Laboratory,” American Society of Mechanical Engineers, Pressure Vessels and
Piping Division (Publication) PVP 7, pp. 425-431 (2008)
96. M. A. Rodriguez, R. M. Carranza, M. L. Stuart, and R. B. Rebak, “Long-term corrosion
potential behavior of alloy 22 in hot 5 m CaCl2 + 5m Ca(NO3)2 brines,” American
Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication)
PVP 7, pp. 395-404 (2008)
97. T. Lian, G. E. Gdowski, P. D. Hailey, and R. B. Rebak, “Crevice repassivation potential
of alloy 22 in high-nitrate dust deliquescence type environments,” American Society of
Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP 7, pp.
413-423 (2008)
98. R. B. Rebak, S. D. Day, T. Lian, L. F. Aprigliano, P. D. Hailey, and J. C. Farmer,
“Enhanced corrosion resistance of iron-based amorphous alloys,” American Society of
433-441 (2008)
99. K. J. Evans, M. L. Stuart, P. D. Hailey, and R. B. Rebak, “Long-term immersion testing
of alloy 22 and titanium grade 7 double u-bend specimens,” American Society of
405-412 (2008)
100. K. J. Evans and R. B. Rebak, “Anodic polarization behavior of titanium grade 7 in dust
deliquescence salt environments,” American Society of Mechanical Engineers, Pressure
Vessels and Piping Division (Publication) PVP 7, pp. 387-394 (2008)
101. R. B. Rebak, “Materials issues for advanced nuclear systems,” Metallurgical and
Materials Transactions A: Physical Metallurgy and Materials Science, Vol. 39, No. 2,
pp. 211 (2008)
102. J. C. Farmer, J.-S. Choi, C.-K. Saw, R. B. Rebak, S. D. Day, T. Lian, P. D. Hailey, J. H.
Payer, D. J. Branagan, and L. F. Aprigliano, “Corrosion resistance of amorphous
Fe49.7Cr17.7 Mn1.9Mo7.4W1.6B15.2 C3.8Si2.4 Coating: A new criticality control material,”
Nuclear Technology, Vol. 161, No. 2, February 2008, pp. 169-189 (2008)
103. R. B. Rebak, S. D. Day, T. Lian, P. D. Hailey, and J. C. Farmer, “Environmental testing
of iron-based amorphous alloys,” Metallurgical and Materials Transactions A: Physical
Metallurgy and Materials Science, Vol. 39, No. 2, pp. 225-234 (2008)

10
104. R. B. Rebak, “Material corrosion issues for nuclear waste disposition in Yucca
Mountain,” Journal of Metals, Vol. 60, No. 1, pp. 40-43 (2008)
105. J. C. Estill and R. B. Rebak, “Anodic behavior of specimens prepared from a full-
diameter Alloy 22 fabricated mockup container for nuclear waste,” Journal of Pressure
Vessel Technology, Transactions of the ASME, Vol. 129, No. 4, November 2007, pp.
729-736
106. L. F. Aprigliano, S. D. Day, J. J. Haslam, J. C. Farmer, and R. B. Rebak, “Industrial salt
fog testing of a SAM2X5 coated stainless steel cylinder,” in Materials Science and
Technology Conference and Exhibition, MS&T’07 - "Exploring Structure, Processing,
and Applications Across Multiple Materials Systems" Vol. 4, pp. 2297-2304 (2007)
107. S. D. Day, J. J. Haslam, J. C. Farmer, and R. B. Rebak, “Dissolution modes and effect of
high temperature aging on the corrosion resistance of iron based amorphous alloys,”
Materials Science and Technology Conference and Exhibition, MS&T’07 - "Exploring
Structure, Processing, and Applications Across Multiple Materials Systems,” Vol. 4, pp.
2411-2423 (2007)
108. S. D. Day, T. Lian, J. C. Farmer, and R. B. Rebak, “Cyclic and linear polarization of
yttrium containing iron-based amorphous alloys,” Materials Science and Technology
Conference and Exhibition, MS&T’07 - "Exploring Structure, Processing, and
Applications Across Multiple Materials Systems,” Vol. 4, Pages 2361-2372 (2007)
109. J. Farmer, J. Haslam, S. Day, T. Lian, C.-K. Saw, P. Hailey, J.-S. Choi, R. Rebak, J.
Payer, C. Blue, W. Peters, and D. Branagan, “The corrosion resistance of Fe-based
amorphous metals: Fe49.7Cr17.7Mn1.9Mo7.4W1.6B15.2C3.8Si2.4 and other compositions,”
Materials Science and Technology Conference and Exhibition, MS&T’07 - "Exploring
Structure, Processing, and Applications Across Multiple Materials Systems,” Vol. 4, pp.
2285-2296 (2007)
110. P. D. Hailey, J. C. Farmer, S. D. Day, and R. B. Rebak, “Anodic behavior of SAM2×5
material applied as amorphous coatings,” Materials Science and Technology Conference
and Exhibition, MS&T’07 - "Exploring Structure, Processing, and Applications Across
Multiple Materials Systems,” Vol. 4, pp. 2398-2410 (2007)
111. K. J. Evans and R. B. Rebak, “Measuring the Repassivation Potential of Alloy 22 Using
the Potentiodynamic – Galvanostatic – Potentiostatic Method,” Journal of ASTM
International, Vol. 4, No. 9, Paper ID JAI101230 as proceedings of the Symposium on
Advances in Electrochemical Techniques for Corrosion Monitoring and Measurement,
22-23 May 2007 in Norfolk, VA
112. R. M. Carranza, M. A. Rodriguez and R. B. Rebak “Effect of Fluoride Ions on the
Crevice Corrosion and Passive Behavior of Alloy 22 in Hot Chloride Solutions,”
Corrosion, Vol. 63, No. 5, 480 (2007)
113. R. B. Rebak, “Environmental Degradation of Materials for Nuclear Waste Repositories
Engineered Barriers,” Advances in Materials Science, Vol. 7, No. 2 (2007)
114. J. Lamb, V. Arjunan, V. Deodeshmukh, D. Chandra, J. Daamen, and R. B. Rebak,
“Hydrogen Diffusion and Trapping Effects in Low and Medium Carbon Steels for

11
Subsurface Reinforcement in the Proposed Yucca Mountain Repository,” Metallurgical
and Materials Transactions A, 38A, 348-355 (2007)
115. R. M. Carranza, M. A. Rodriguez and R. B. Rebak, “Environmental and Geometrical
Conditions to Sustain Crevice Corrosion in Alloy 22,” paper 07581 in proceedings of the
NACE International Corrosion/2007 Conference and Exposition, 11-15 March 2007,
Nashville, TN
116. R. B. Rebak, K. J. Evans and G. O. Ilevbare, “Crevice Repassivation Potential of Alloy
22 in Simulated Concentrated Ground Waters,” paper 07584, in proceedings of the
NACE International Corrosion/2007 Conference and Exposition, 11-15 March 2007,
Nashville, TN
117. M. A. Rodriguez, M. L. Stuart and R. B. Rebak, “Long-Term Electrochemical Behavior
of Creviced and Non-Creviced Alloy 22 in CaCl2 + Ca(NO3)2 Brines at 155°C,” paper
07577 in proceedings of the NACE International Corrosion/2007 Conference and
Exposition, 11-15 March 2007, Nashville, TN
118. N. S. Meck, P. Crook and R. B. Rebak, “The Influence of Composition upon Surface
Degradation and Stress Corrosion Cracking of the Ni-Cr-Mo Alloys in Wet Hydrofluoric
Acid,” paper 07481 in proceedings of the NACE International Corrosion/2007
Conference and Exposition, 11-15 March 2007, Nashville, TN.
119. R. B. Rebak, “Environmental Cracking of Corrosion Resistant Alloys in the Chemical
Process Industry – A Review,” paper 07480 in proceedings of the NACE International
Corrosion/2007 Conference and Exposition, 11-15 March 2007, Nashville, TN
120. R. B. Rebak, L. F. Aprigliano, S. D. Day, J. J. Haslam and J. C. Farmer, “Salt-Fog
Testing of Iron-Based Amorphous Alloys,” paper NN3.14, in proceedings of the
Materials Research Society Fall Meeting, 27 November to 01 December 2006, Boston
Massachusetts, Materials Research Society Symposium Proceedings, Vol. 985, pp. 321-
326 (2007)
121. J. Farmer, J. Haslam, D. Day, T. Lian, C. Saw, P. Hailey, J.-S. Choi, R. Rebak, N. Yang,
R. Bayles, L. Aprigliano, J. Payer, J. Perepezko, K. Hildal, E. Lavernia, L. Ajdelsztajn,
D. Branagan, B. Beardsley, “A high-performance corrosion-resistant iron-based
amorphous metal-the effects of composition, structure and environment on corrosion
resistance,” Materials Research Society Symposium Proceedings, Vol. 985, pp. 255-260
(2007)
122. K. J. Evans and R. B. Rebak, “Repassivation Potential of Alloy 22 in Chloride plus
Nitrate Solutions Using the Potentiodynamic-Galvanostatic-Potentiostatic Method,”
paper NN3.13 in proceedings of the Materials Research Society Fall Meeting, 27
November to 01 December 2006, Boston Massachusetts, Materials Research Society
Symposium Proceedings, Vol. 985, pp. 313-320 (2007)
123. R. B. Rebak, “Mechanisms of Inhibition of Crevice Corrosion in Alloy 22,” paper
NN8.4 in proceedings of the Materials Research Society Fall Meeting, 27 November to
01 December 2006, Boston Massachusetts, Materials Research Society Symposium
Proceedings, Vol. 985, pp. 261-268 (2007)

12
124. R. M Carranza, M. A. Rodriguez and R. B. Rebak, “Oxide Film Aging on Alloy 22 in
Halide Containing Solutions,” paper NN8.9 in proceedings of the Materials Research
Society Fall Meeting, 27 November to 01 December 2006, Boston Massachusetts,
Materials Research Society Symposium Proceedings, Vol. 985, pp. 287-292 (2007)
125. R. B. Rebak, R. A. Etien, S. R. Gordon and G. O. Ilevbare, “Influence of Black
Annealing Oxide Scale on the Anodic Behavior of Alloy 22,” Corrosion, Vol. 62, No. 11,
pp. 967-980 (2006)
126. D. V. Fix and R. B. Rebak, “Impact of Small Chemistry Variations in Plate and Weld
Filler Metal on the Corrosion Performance of Ni-Cr-Mo Alloys,” Journal of ASTM
International, Vol. 3, Issue 10, November/December 2006
127. R. B. Rebak, “Selection of Corrosion Resistant Materials for Nuclear Waste
Repositories,” in proceedings of the MS&T’06 Conference, 15-19Oct06, Cincinnati, OH
128. R. B. Rebak, “Corrosion Engineers and Nuclear Waste Disposition,” Materials
Performance, Vol. 45, No. 9, p. 8 (2006)
129. R. B. Rebak and R. Daniel McCright, “Corrosion of Containment Materials for
Radioactive-Waste Isolation,” in Metals Handbook, Volume 13C “Corrosion: Materials,
pp. 421-437 (ASM International, 2006: Metals Park, OH)
130. S. D. Day, F. M. G. Wong, S. R. Gordon, L. L. Wong, and R. B. Rebak,
“Electrochemical Testing of Gas Tungsten Arc Welded and Reduced Pressure Electron
Beam Welded Alloy 22,” Paper 93730 in the Proceedings of PVP2006-ICPVT-11, 2006
ASME Pressure Vessels and Piping Division Conference, July 23-27, 2006, Vancouver,
BC, Canada
131. G. O. Ilevbare, R. A. Etien, J. C. Estill, G. A. Hust, A. Yilmaz, M. L. Stuart, and
R. B. Rebak, “Anodic Behavior of Alloy 22 in High Nitrate Brines at Temperatures
Higher than 100°C,” Paper 93423 in the Proceedings of PVP2006-ICPVT-11, 2006
ASME Pressure Vessels and Piping Division Conference, July 23-27, 2006, Vancouver,
BC, Canada
132. J. C. Estill, G. A. Hust, K. J. Evans, M. L. Stuart, and R. B. Rebak, “Long-Term
Corrosion Behavior of Alloy 22 in 5 M CaCl2 at 120°C,” Paper 93422 in the Proceedings
of PVP2006-ICPVT-11, 2006 ASME Pressure Vessels and Piping Division Conference,
July 23-27, 2006, Vancouver, BC, Canada
133. L. L. Wong, S. I. Martin, and R. B. Rebak, “Methods to Calculate Corrosion Rates for
Alloy 22 from Polarization Resistance Experiments,” Paper 93421 in the Proceedings of
PVP2006-ICPVT-11, 2006 ASME Pressure Vessels and Piping Division Conference,
July 23-27, 2006, Vancouver, BC, Canada
134. T. Lian, T. Yashiki, T. Nakayama, T. Nakanishi, and R. B. Rebak, “Comparative
Corrosion Behavior of Two Palladium-Containing Titanium Alloys,” Paper 93418 in the
Proceedings of PVP2006-ICPVT-11, 2006 ASME Pressure Vessels and Piping Division
Conference, July 23-27, 2006, Vancouver, BC, Canada
135. D. V. Fix and R. B. Rebak, “Effect of Chemistry Variations in Plate and Weld Filler
Metal on the Corrosion Performance of Ni-Cr-Mo Alloys,” Paper 93417 in the

13
136. J. C. Farmer, J. J. Haslam, S. D. Day, T. Lian, R. B. Rebak, N. Yang, and L. Aprigliano
“Corrosion Resistance of Iron Based Amorphous Metal Coatings,” Paper 93835 in the
137. N. S. Meck, P. Crook and R. B. Rebak, “Electrochemical Behaviour of Nickel Alloys in
HCl Solutions Containing Oxidizing Impurities,” Stainless Steel World, May 2006, pp.
20-31
138. J. H. Payer, S. A. Carroll, G. E. Gdowski and R. B. Rebak, “A Framework for the
Analysis of Localized Corrosion at the Proposed Yucca Mountain Repository,” in
International High-Level Radioactive Waste Management
Conference, Las Vegas, NV April 30 to May 04, 2006, pp. 470-477 (American Nuclear
Society, La Grange Park, IL)
139. T. Lian, T. Yashiki, T. Nakanishi, T. Nakayama and R. B. Rebak, “Comparative
Localized Corrosion Behavior Between High and Low Palladium Titanium Alloys,” in
International High-Level Radioactive Waste Management
Conference, Las Vegas, NV April 30 to May 04, 2006, pp. 890-899 (American Nuclear
Society, La Grange Park, IL)
140. R. B. Rebak and J. H. Payer, “Passive Corrosion Behavior of Alloy 22,” in proceedings
of the 11th
International High-Level Radioactive Waste Management Conference, Las
Vegas, NV April 30 to May 04, 2006, pp. 493-499 (American Nuclear Society, La
Grange Park, IL)
141. R. B. Rebak, “Industrial Experience on the Caustic Cracking of Stainless Steels and
Nickel Alloys – A Review,” Paper 06501, Corrosion/2006, NACE International, March
12-16, 2006, San Diego, CA (NACE International, Houston, TX)
142. F. Hua, G. M. Gordon, K. G. Mon and R. B. Rebak, “Degradation Modes of Alloy 22 in
Yucca Mountain Repository Conditions,” Paper 06619, Corrosion/2006, NACE
International, March 12-16, 2006, San Diego, CA (NACE International, Houston, TX)
143. R. H. Jones, D. R. Baer, C. F. Windisch Jr. and R. B. Rebak, “Corrosion Enhanced
Enrichment of Sulfur and Implications for Alloy 22,” Paper 06621, Corrosion/2006,
NACE International, March 12-16, 2006, San Diego, CA (NACE International, Houston,
TX)
144. K. J. Evans, M. L. Stuart, R. A. Etien, G. A. Hust, J. C. Estill and R. B. Rebak, “Long-
Term Corrosion Potential and Corrosion Rate of Creviced Alloy 22 in Chloride plus
Nitrate Brines,” Paper 06623, Corrosion/2006, NACE International, March 12-16, 2006,
San Diego, CA (NACE International, Houston, TX)
145. R. B. Rebak, R. A. Etien and G. O. Ilevbare, “Influence of Black Annealing Oxide Scale
on the Anodic Behavior of Alloy 22,” Paper 06624, Corrosion/2006, NACE

14
146. R. M. Carranza, M. A. Rodríguez and R. B. Rebak, “Inhibition of Chloride Induced
Crevice Corrosion in Alloy 22 by Fluoride Ions,” Paper 06626, Corrosion/2006, NACE
147. R. M. Carranza, C. M. Giordano, M. A. Rodríguez and R. B. Rebak, “Corrosion
Behavior of Alloy 22 in Chloride Solutions Containing Organic Acids,” Paper 06627,
Corrosion/2006, NACE International, March 12-16, 2006, San Diego, CA (NACE
International, Houston, TX)
148. R. B. Rebak, “Aqueous Corrosion Properties of Nickel Alloys” and “Environmental
Cracking of Nickel Alloys” in Metals Handbook, Volume 13B “Corrosion: Materials, pp.
231-238 and pp. 238-240 (ASM International, 2005: Metals Park, OH)
149. R. M. Carranza, R. B. Rebak and M. A. Rodríguez, “Effecto Inhibidor del Fluoruro
Sobre la Corrosión en Rendijas de la Aleación C-22 Inducida por Cloruros,” in
proceedings of the Congreso Binacional SAM / CONAMET 2005, 18-21 October 2005,
Mar del Plata, Argentina
150. R. M. Carranza, M. A. Rodríguez and R. B. Rebak, “Passivity of Alloy 22 in Chloride
and Fluoride Containing Environments,” in Proceedings of the 16th
International
Corrosion Congress, Beijing, China, September 19-24 2005, Paper 06-02 (Chinese
Society for Corrosion and Protection, 2005: Beijing, China)
151. F. Hua, P. Pasupathi, N. Brown, K. G. Mon, G. M. Gordon, D. W. Shoesmith, and
R. B. Rebak, “Some Materials Degradation Issues in the US High-Level Nuclear Waste
Repository Study,” in Proceedings of the 16th
International Corrosion Congress, Beijing,
China, September 19-24 2005, Paper 06-01 (Chinese Society for Corrosion and
Protection, 2005: Beijing, China)
152. R. B. Rebak,“Environmentally Assisted Cracking of Commercial Ni-Cr-Mo Alloys – A
Review,” Power Plant Chemistry, Vol. 7, pp. 623-631 (2005)
153. K. G. Mon, G. M. Gordon, and R. B. Rebak, “Stifling of Crevice Corrosion in Alloy 22,”
in Proceedings of the 12th
International Conference on Environmental Degradation of
Materials in Nuclear Power Systems – Water Reactors, pp. 1431-1438, Salt Lake City,
UT 14-18 August 2005 (TMS, 2005: Warrendale, PA)
154. D. V. Fix, J. C. Estill, and R. B. Rebak, “Effect of Small Variation in the Composition of
Plates and Weld Filler Wires on the General Corrosion Rate of Ni-Cr-Mo Alloys,” paper
PVP2005-71173 in Proceedings of the 2005 ASME Pressure Vessels and Piping Division
Conference, July 17-21 2005, Denver, CO, Vol. 7, pp. 483-492 (American Society of
Mechanical Engineers, New York, NY)
155. K. G. Mon, A. Yilmaz, P. Pasupathi, and R. B. Rebak, “Stifling of Crevice Corrosion in
Alloy 22 During Constant Potential Tests,” paper PVP2005-71174 in Proceedings of the
2005 ASME Pressure Vessels and Piping Division Conference, July 17-21 2005, Denver,
CO, Vol. 7, pp. 493-502 (American Society of Mechanical Engineers, 2005: New York,
NY)
156. A. Yilmaz, D. V. Fix, J. C. Estill and R. B. Rebak, “Correlation Between Two Types of
Surface Stress Mitigation and the Resistance to Corrosion of Alloy 22,” paper PVP2005-
71175 in Proceedings of the 2005 ASME Pressure Vessels and Piping Division

15
Mechanical Engineers, 2005: New York, NY)
157. K. J. King, J. C. Estill and R. B. Rebak, “Anodic Behavior of Specimens Prepared from
a Full-Diameter Alloy 22 Fabricated Container for Nuclear Waste,” paper PVP2005-
71176 in Proceedings of the 2005 ASME Pressure Vessels and Piping Division
Mechanical Engineers, 2005: New York, NY)
158. R. B. Rebak, “Effect of processing on materials properties for nuclear waste disposition:
Foreword,” Metallurgical and Materials Transactions A, Vol. 36A, No. 5, p. 1073 (2005)
159. A. Yilmaz, D. Chandra and R. B. Rebak, “Corrosion Behavior of Carbon Steel Rock
Bolt in Simulated Yucca Mountain Ground Water,” Metallurgical and Materials
Transactions A, Vol. 36A, No. 5, pp. 1097-1105 (2005)
160. M. A. Rodriguez, R. M. Carranza and R. B. Rebak, “Influence of Halide Ions and Alloy
Microstructure on the Passive and Localized Corrosion Behavior of Alloy 22,”
Metallurgical and Materials Transactions A, Vol. 36A, No. 5, pp. 1179-1185 (2005)
161. J. C. Estill, G. A. Hust, K. J. King and R. B. Rebak, “Corrosion Rate of Alloy 22 as a
Function of Immersion Time,” TMS Letters, Vol. 2, pp. 13-14 (2005)
162. N. S. Meck, P. Crook and R. B. Rebak, “Electrochemical Behavior of Nickel Alloys in
HCl Solutions Containing Oxidizing Impurities,” Paper 05334, Corrosion/2005, NACE
International, April 03-07, 2005, Houston, TX (NACE International, Houston, TX)
163. M. A. Rodriguez, R. M. Carranza, S. D. Day and R. B. Rebak, “Crevice Corrosion
Susceptibility of Alloy 22 in Fluoride and Chloride Containing Environments,” Paper
05599, Corrosion/2005, NACE International, April 03-07, 2005, Houston, TX (NACE
International, Houston, TX)
164. D. V. Fix, A. Yilmaz, L. L. Wong, J. C. Estill and R. B. Rebak, “Effect of Surface Stress
Mitigation on the Corrosion Behavior of Alloy 22,” Paper 05606, Corrosion/2005, NACE
International, April 03-07, 2005, Houston, TX (NACE International, Houston, TX)
165. K. J. King, J. C. Estill, G. A. Hust, M. L. Stuart and R. B. Rebak, “Evolution of the
Corrosion Potential and the Corrosion Rate for Alloy 22 in Chloride Plus Nitrate Brines,”
Paper 05607, Corrosion/2005, NACE International, April 03-07, 2005, Houston, TX
(NACE International, Houston, TX)
166. R. B. Rebak, “Factors Affecting the Crevice Corrosion Susceptibility of Alloy 22,”
Paper 05610, Corrosion/2005, NACE International, April 03-07, 2005, Houston, TX
(NACE International, Houston, TX)
167. K. J. Evans, A. Yilmaz, S. Daniel Day, L. L. Wong, J. C. Estill, and R. B. Rebak, “Using
Electrochemical Methods to Determine Alloy 22’s Crevice Corrosion Repassivation
Potential,” Journal of Metals, Vol. 57, No. 1, pp. 56-61 (2005)
168. N. S. Meck, P. Crook, and R. B. Rebak, “Effects of Oxidizing Impurities on the
Corrosion Performance of Nickel Alloys in Hydrochloric Acid Solutions,” Stainless-Steel
World America - 2004 Conference Proceedings, 20-22 October 2004, Houston, TX

16
169. S. D. Day, M. T. Whalen, K. J. King, G. A. Hust, L. L. Wong, J. C. Estill, and
R. B. Rebak, “Corrosion Behavior of Alloy 22 in Oxalic Acid and Sodium Chloride
Solutions,” Corrosion, Vol. 60, No. 9, pp. 804-814 (2004)
170. R. B. Rebak, “Environmentally Assisted Cracking of Nickel Alloys – A Review,”
presented at the Second International Conference on Environment-Induced Cracking of
Metals (EICM-2), 19-23 September 2004, Banff, Alberta, Canada (Elsevier, published
November 2007)
171. D. V. Fix, J. C. Estill, L. L. Wong, and R. B. Rebak, “General and Localized Corrosion
of Austenitic and Borated Stainless Steels in Simulated Concentrated Ground Waters,” in
proceedings of the 2004 ASME Pressure Vessels and Piping Division Conference, July
25-29 2004, San Diego, CA, Vol. 483, pp. 121-130 (American Society of Mechanical
Engineers, 2004: New York, NY)
172. P. Crook and R. B. Rebak, “Influence of the Environment on the General Corrosion Rate
of Alloy 22 (N06022),” in proceedings of the 2004 ASME Pressure Vessels and Piping
Division Conference, July 25-29 2004, San Diego, CA, Vol. 483, pp. 131-136 (American
Society of Mechanical Engineers, 2004: New York, NY)
173. K. J. Evans, L. L. Wong, and R. B. Rebak, “Determination of the Crevice Repassivation
Potential of Alloy 22 by a Potentiodynamic-Galvanostatic-Potentiostatic Method,” in
Proceedings of the 2004 ASME Pressure Vessels and Piping Division Conference, July
25-29 2004, San Diego, CA, Vol. 483, pp. 137-149 (American Society of Mechanical
Engineers, 2004: New York, NY)
174. N. S. Meck, P. Crook, D. L. Klarstrom, and R. B. Rebak, “Effect of Ferric Ions on the
Corrosion Performance of Nickel Alloys in Hydrochloric Acid Solutions,” Paper 04430,
Corrosion/2004, NACE International, March 28 – April 1, 2004, New Orleans, LA
175. I. G. Wright, B. A. Pint, Y. Zhang, R. A. Bishop, J. C. Farmer, A. Jankowski, and
R. B. Rebak, “Preliminary High-Temperature Oxidation Data in Steam-CO2 in Support
of the ZEST Process,“ Paper 04531, Corrosion/2004, NACE International, March 28 –
April 1, 2004, New Orleans, LA (NACE International, 2004: Houston, TX)
176. K. J. King, L. L. Wong, J. C. Estill and R. B. Rebak, “Slow Strain Rate Testing of Alloy
22 in Simulated Concentrated Ground Waters,” Paper 04548, Corrosion/2004, NACE
International, March 28 – April 1, 2004, New Orleans, LA (NACE International, 2004:
Houston, TX)
177. D. V. Fix, J. C. Estill, G. A. Hust, L. L. Wong and R. B. Rebak, “Environmentally
Assisted Cracking Behavior of Nickel Alloys in Simulated Acidic and Alkaline Ground
Waters Using U-Bend Specimens,” Paper 04549, Corrosion/2004, NACE International,
March 28 – April 1, 2004, New Orleans, LA (NACE International, 2004: Houston, TX)
178. D. V. Fix, J. C. Estill, L. L. Wong and R. B. Rebak, “Susceptibility of Welded and Non-
Welded Titanium Alloys to Environmentally Assisted Cracking in Simulated
Concentrated Ground Waters,” Paper 04551, Corrosion/2004, NACE International,
March 28 – April 1, 2004, New Orleans, LA (NACE International, 2004: Houston, TX)

17
179. J. H. Lee, T. Summers and R. B. Rebak, “A Performance Assessment Model for
Localized Corrosion Susceptibility of Alloy 22 in Chloride Containing Brines for High-
level Nuclear Waste Disposal Container,” Paper 04692, Corrosion/2004, NACE
International, March 28 – April 1, 2004, New Orleans, LA (NACE International, 2004:
Houston, TX)
180. M. A. Rodríguez, R. M. Carranza and R. B. Rebak, “Effect of Fluoride Ions on the
Anodic Behavior of Mill Annealed and Thermally Aged Alloy 22,” Paper 04700,
181. L. L. Wong, T. Lian, D. V. Fix, M. Sutton and R. B. Rebak, “Surface Analysis of Alloy
22 Coupons Exposed for Five Years to Concentrated Ground Waters,” Paper 04701,
182. F. Wong, C. Punshon, J. Dorsch, P. Fielding, D. Richard, N. Yang, M. Hill, A. DeWald,
R. B. Rebak, S. Day, L. Wong, S. Torres, M. McGregor. L. Hackel, H.-L. Chen and J.
Rankin, “Reduced Pressure Electron Beam Welding Evaluation Activities on a Ni-Cr-Mo
Alloy for Nuclear Waste Package,” in proceedings of the Global 2003 Conference:
Atoms for Prosperity: Updating Eisenhower’s Global Vision for Nuclear Energy, New
Orleans, LA, 16-20 November 2003, pp. 242-250 (American Nuclear Society, 2003: La
Grange Park, IL)
183. R. B. Rebak, “Effects of Metallurgical Variables on the Corrosion of High-Nickel
Alloys” in Metals Handbook, Volume 13A “Corrosion: Fundamentals, Testing and
Protection, pp. 279-286 (ASM International, 2003: Metals Park, OH)
184. R. B. Rebak and J. C. Estill, “Review of Corrosion Modes for Alloy 22 Regarding
Lifetime Expectancy of Nuclear Waste Containers” in Scientific Basis for Nuclear Waste
Management XXVI, Vol. 757, pp. 713-721 (Materials Research Society, 2003:
Warrendale, PA)
185. L. L. Wong, D. V. Fix, J. C. Estill, R. D. McCright, and R. B. Rebak, “Characterization
of the Corrosion Behavior of Alloy 22 after Five Years Immersion in Multi-Ionic
Solutions” in Scientific Basis for Nuclear Waste Management XXVI, Vol. 757, pp. 735-
741 (Materials Research Society, 2003: Warrendale, PA)
186. K. J. Evans, S. D. Day, G. O. Ilevbare, M. T. Whalen, K. J. King, G. A. Hust, L. L.
Wong, J. C. Estill, and R. B. Rebak, “Anodic Behavior of Alloy 22 in Calcium Chloride
and in Calcium Chloride plus Calcium Nitrate Brines,” American Society of Mechanical
Engineers, Pressure Vessels and Piping Division, PVP-Vol. 467, pp. 55-62 (New York,
NY: ASME, 2003)
187. L. L. Wong, D. V. Fix, J. C. Estill, and R. B. Rebak, “Corrosion Characteristics of
Titanium Alloys in Multi-ionic Environments,” American Society of Mechanical
Engineers, Pressure Vessels and Piping Division, PVP-Vol. 467, pp. 63-71 (New York,
NY: ASME, 2003)
188. N. S. Meck, P. Crook, S. D. Day, and R. B. Rebak, “Localized Corrosion Susceptibility
of Nickel Alloys in Halide Containing Environments,” Paper 03682 (Houston, TX:
NACE International, 2003)

18
189. J. C. Estill, G. A. Hust, and R. B. Rebak, “Long Term Corrosion Potential Behavior of
Alloy 22 in Yucca Mountain Relevant Environments,” Paper 03688 (Houston, TX:
NACE International, 2003)
190. T. Lian, J. C. Estill, G. A. Hust, and R. B. Rebak, “Passive and Transpassive Dissolution
of Alloy 22 in Simulated Repository Environments,” Paper 03694 (Houston, TX: NACE
International, 2003)
191. K. J. King, J. C. Estill, D. V. Fix, G. A. Hust, and R. B. Rebak, “Influence of
Environmental Variables on the Susceptibility of Alloy 22 to Environmentally Assisted
Cracking,” Paper 03542 (Houston, TX: NACE International, 2003)
192. T. Lian, J. C. Estill, G. A. Hust, D. V. Fix, and R. B. Rebak, “Passive Corrosion
Behavior of Alloy 22 in Multi-Ionic Aqueous Environments,” American Society of
Mechanical Engineers, Pressure Vessels and Piping Division, PVP-Vol. 449, pp. 67-74
(New York, NY: ASME, 2002)
193. K. J. King, J. C. Estill and R. B. Rebak, “Characterization of the Resistance of Alloy 22
to Stress Corrosion Cracking,” American Society of Mechanical Engineers, Pressure
Vessels and Piping Division, PVP-Vol. 449, pp. 103-109 (New York, NY: ASME, 2002)
194. P. Crook and R. B. Rebak, “Mechanical Properties and Corrosion Characteristics of
Thermally Aged Alloy 22,” American Society of Mechanical Engineers, Pressure Vessels
and Piping Division, PVP-Vol. 449, pp. 111-117 (New York, NY: ASME, 2002)
195. K. J. Evans and R. B. Rebak, “Passivity of Alloy 22 in Concentrated Electrolytes. Effect
of Temperature and Solution Composition,” PV2002-13, pp. 344-354 (The
Electrochemical Society, 2002: Pennington, NJ)
196. N. S. Meck, P. Crook and R. B. Rebak, “Susceptibility of Nickel and Cobalt Alloys to
Localized Corrosion in Fluoride and Iodide Solutions. Comparative Behavior to Chloride
and Bromide Solutions,” PV2002-13, pp. 355-368 (The Electrochemical Society, 2002:
Pennington, NJ)
197. R. B. Rebak, T. S. Edgecumbe Summers, T. Lian, R. M. Carranza, J. R. Dillman, T.
Corbin and P. Crook, “Effect of Thermal Aging on the Corrosion Behavior of Wrought
and Welded Alloy 22,” Paper 02542, Corrosion/02, NACE International, April 7-12,
2002, Denver CO
198. J. C. Estill, K. J. King, D. V. Fix, D. G. Spurlock, G. A. Hust, S. R. Gordon, R. D.
McCright, G. M. Gordon, and R. B. Rebak, “Susceptibility of Alloy 22 to
Environmentally Assisted Cracking in Yucca Mountain Relevant Environments,” Paper
02535, Corrosion/02, NACE International, April 7-12, 2002, Denver CO
199. T. S. E. Summers, R. B. Rebak, T. A. Palmer and P. Crook, “Influence of Thermal
Aging on the Mechanical and Corrosion Properties of GTAW Welds of Alloy 22,” Paper
JJ1.5, Scientific Basis for Nuclear Waste Management XXV, MRS Meeting Boston,
November 26-30, 2001, Vol. 713, pp. 45-52 (Materials Research Society, 2002:
Warrendale, PA)
200. R. B. Rebak, P. Crook, J. R. Dillman, and C. V. V. Shawber, “Corrosion Behavior of
Nickel Alloys in Wet Hydrofluoric Acid,” Materials and Corrosion (Werkstoffe und
Korrosion), 52, No. 4, 289-297 (2001)

19
201. R. B. Rebak, “Corrosion of Non-ferrous Alloys. I Nickel-, Cobalt-, Copper-, Zirconium-
and Titanium Based Alloys,” Chapter 2 in Volume II of “Corrosion and Environmental
Degradation” edited by M. Schütze. Volume 19 of the series “Materials Science and
Technology - A Comprehensive Treatment” Edited by R. W. Cahn, P. Haasen and E. J.
Kramer (Wiley-VCH, Germany, 2000): pp. 69-111
202. R. B. Rebak, “Environmentally Assisted Cracking in the Chemical Process Industry.
Stress Corrosion Cracking of Iron, Nickel and Cobalt Based Alloys in Chloride and Wet
HF Services,” in Environmentally Assisted Cracking: Predictive Methods for Risk
Assessment and Evaluation of Materials, Equipment, and Structures, ASTM STP 1401, R.
D. Kane, Ed., American Society for Testing and Materials, West Conshohocken, PA, pp.
289-300 (2000)
203. R. B. Rebak T. S. E. Summers and R. R. Seeley, “Influence of Thermal Aging on the
Mechanical and Corrosion Properties of C-22 Alloy Welds,” in Materials Issues in
Nuclear Waste Management, 2000 TMS Fall Meeting, October 8-12, St. Louis, Missouri
(TMS, 2000: Warrendale, PA)
204. R. B. Rebak and D. A. Kingseed, “Performance of Conductor Rolls Alloys in
Electrogalvanizing Plants,” presented at Workshop on Continuous Steel Strip Plating,
Merrilville, Indiana, May 9-10, 2000. Published in the proceedings of the conference
205. R. B. Rebak, P. Crook, and R. Baden, “Corrosion-Resistant Nickel Alloys,” ACHEMA
2000, Frankfurt, Germany, May 2000
206. R. B. Rebak, N. E. Koon, J. R. Dillman, P. Crook, and T. S. E. Summers, “Influence of
Aging on Microstructure, Mechanical Properties and Corrosion Resistance of C-22
Alloy,” Paper 00181, Corrosion/2000, Orlando, Florida, March 26-31, 2000
207. R. B. Rebak and P. Crook, “Influence of Alloying Elements, Temperature and
Electrolyte Composition on the Corrosion Behavior of Nickel Based Alloys,” Paper
00499, Corrosion/2000, Orlando, Florida, March 26-31 2000
208. R. B. Rebak, D. A. Kingseed and P. Crook, “Pitting Nickel Against Corrosion,”
Chemical Processing, Vol. 63, February, pp. 49-54 (2000)
209. R. B. Rebak and P. Crook, “Nickel Alloys for Corrosive Environments,” Advanced
Materials and Processes, Vol. 157, February, pp. 37-42 (2000)
210. R. B. Rebak, T. S. E. Summers, and R. M. Carranza, “Mechanical Properties,
Microstructure and Corrosion Performance of C-22 Alloy Aged at 260°C to 800°C,”
Paper QQ14.4, Symposium on Scientific Basis for Nuclear Waste Management XXIII,
1999 MRS Fall meeting, Boston, Massachusetts, November 29 - December 3, 1999, Vol.
608, pp. 109-114 (Materials Research Society, Warrendale, PA, 2000)
211. R. B. Rebak, N. E. Koon, and P. Crook, “Localized Corrosion Behavior of Nickel and
Cobalt Based Alloys in Chloride and Bromide Solutions,” in proceedings of the
International Symposium in honor of Professor Norio Sato: Passivity and Localized
Corrosion, Honolulu, Hawaii, October 17-22, 1999, Vol. 99-27, pp. 473-482 (The
Electrochemical Society, Pennington, NJ, 1999)
212. R. B. Rebak, N. E. Koon, and P. Crook, “Effect of High Temperature Ageing on the
Electrochemical Behaviour of C-22 Alloy,” presented at the 50th International Society of

20
Electrochemistry Meeting, Pavia, Italy, September 5-10, 1999 published by the European
Federation of Corrosion, Vol. 28, Paper 14 (The Institute of Materials, London, 2000):
pp. 245-255
213. T. S. Edgecumbe Summers, T. Shen, and R. B. Rebak, “Prediction of the Lifetime
Integrity of a Nuclear Waste Container Material Based on Thermal Stability Studies,” in
International Conference on Ageing Studies and Lifetime Extension of Materials, St.
Catherine’s College, Oxford, UK July 12-14 1999, pp. 507-513 (Kluwer Academic /
Plenum Publishers, 2001: New York, NY)
214. L. D. Paul, P. Crook, and R. B. Rebak, “Corrosion Resistant Material Options for
Environmental Equipment,” in proceedings of the Incineration and Thermal Treatment
Technologies Conference, Orlando, Florida, May 11-13, 1999
215. R. B. Rebak and S. K. Srivastava, “Corrosion Performance of a Nickel-Molybdenum-
Chromium Alloy: Effects of Aging, Alloying Elements and Electrolyte Composition,”
Corrosion, Vol. 55, pp. 412-421 (1999)
216. R. B. Rebak, “Corrosion Rate of Nickel Based Alloys Measured by Electrochemical
Techniques and Immersion Tests. Effect of Temperature, Alloying Elements and
Electrolyte Composition,” Paper 99219 in Corrosion/99, San Antonio, Texas, April 25-
30, 1999
217. R. B. Rebak, T. S. Edgecumbe Summers, M. A. Wall, M. Kumar and S. J. Matthews,
“Phase Stability and Mechanical Properties of C-22 Alloy Aged in the Temperature
Range 590°C to 760°C for 16,000 h,” Paper QQ9.71 in the Symposium on Scientific
Basis for Nuclear Waste Management XXII, Fall Meeting of the Materials Research
Society, Boston, Massachusetts, November 30 - December 4, 1998, Vol. 556 (Materials
Research Society, Warrendale, PA, 1999): pp. 919-926
218. R. B. Rebak and P. Crook, “Improved Pitting and Crevice Corrosion Resistance of
Nickel and Cobalt Based Alloys,” in the symposium on “Critical Factors in Localized
Corrosion III” at the 194th Electrochemical Society Meeting, Boston, Massachusetts,
November 1-6, 1998, Volume 98-17 (The Electrochemical Society, Pennington, NJ,
1999): pp. 289-302
219. R. B. Rebak, “Comparison Between Electrochemical Methods and Immersion Tests for
Measuring the Corrosion Rate of Three Nickel Based Alloys. Effect of Temperature,
Alloying Elements and Electrolyte Composition,” Paper S17-32 in the 3rd NACE Latin
American Region Corrosion Congress, Cancún, Mexico, August 30 - September 4, 1998
220. R. B. Rebak and N. E. Koon, “Localized Corrosion Resistance of High Nickel Alloys as
Candidate Materials for Nuclear Waste Repository. Effect of Alloy and Weldment Aging
at 427°C for up to 40,000 h,” Paper N° 98153, Corrosion '98, San Diego, California,
March 22-27, 1998 (Houston, TX: NACE International, 1998)
221. R. B. Rebak, “Materials Selection for Conductor Rolls in Electrogalvanizing Plants,” in
proceedings of the international symposium on “Zinc-Based Steel Coating Systems:
Production and Performance,” 127th Annual TMS Meeting in San Antonio, TX February
15-19, 1998, pp. 63-72 (The Minerals, Metals and Materials Society, Warrendale, PA,
1998)

21
222. R. B. Rebak, “Localized Corrosion Resistance of HASTELLOY® C-22®, C-276 and C-
4 Alloys as Candidate Materials for Nuclear Waste Repository. Effect of Alloy Aging at
427°C for up to 40,000 h.,” presented as paper N° 347 in the Joint International Meeting
of the 192nd Meeting of the Electrochemical Society (ECS) and the 48th Annual Meeting
of the International Society of Electrochemistry (ISE), August 31 - September 5, 1997 in
Paris, France, Volume 97-26 (The Electrochemical Society, Pennington, NJ, 1998): pp.
1001-1012
223. A. Barkatt, E. Labuda, D. M. Wilder, G. Cherepakhov, R. J. Burns, Z. Szklarska-
Smialowska, R. Mowad, and R. B. Rebak, “Effects of Ethanolamine, pH Change, and
Increased Hydrazine Levels on Deposit-Covered Alloy 600 and Brass Corrosion,”
Materials Performance, (September 1997): pp. 48-53
224. R. B. Rebak, L. Muchjin and Z. Szklarska-Smialowska, “Hydrogen Diffusion and
Accumulation in Automotive Fasteners,” Corrosion, 53 (1997): pp. 481-488
225. R. B. Rebak, “Laboratory Testing to Evaluate the Corrosion Performance of Conducting
Roll Materials in the Electroplating Industry,” Paper 97264, Corrosion '97, New Orleans,
Louisiana, March 9-14, 1997 (Houston, TX: NACE International, 1997)
226. A. Barkatt, E. Labuda, D. M. Wilder, M. Gmurczyk, Z. Szklarska-Smialowska, R.
Mowad, and R. B. Rebak, “Effects of Ethanolamine as an Additive in the Secondary
Water at Indian Point 2,” Paper 97117, Corrosion '97, New Orleans, Louisiana, March 9-
14, 1997 (Houston, TX: NACE International, 1997)
227. R. B. Rebak, “Application of Co-Cr-Ni and Ni-Cr-Mo Alloys in the Electrogalvanizing
Industry,” in Proceedings of the Second Latin-American Corrosion Congress, Rio de
Janeiro, Brazil, September 9-13 1996. Paper LA 96074
228. A. Barkatt, E. Labuda, D. M. Wilder, M. Gmurczyk, Z. Szklarska-Smialowska, R.
Mowad and R. B. Rebak, “Effects of Additives and pH of Secondary Water on Deposits
in the Steam Generators and on Brass Corrosion at Indian Point 2,” EPRI Sludge
Management Workshop in Myrtle Beach, South Carolina, August 19-21, 1996
229. R. B. Rebak and Z. Szklarska-Smialowska, “The Mechanism of Stress Corrosion
Cracking of Alloy 600 in High Purity Water,” Corrosion Science, 38 (1996): pp. 971-988
230. R. B. Rebak, Z. Xia, R. Safruddin and Z. Szklarska-Smialowska, “Effect of Solution
Composition and Electrochemical Potential on Stress Corrosion Cracking of X-52
Pipeline Steel,” Corrosion, 52 (1996): pp. 396-405
231. R. B. Rebak and Z. Szklarska-Smialowska, “Stress Corrosion Cracking of Alloy 600 in
High Temperature Aqueous Solutions: Influencing Factors, Mechanisms and Models,” in
Control of Corrosion on the Secondary Side of Steam Generators, Proceedings of a
Conference jointly sponsored by The Electric Power Research Institute and Argonne
National Laboratory, Airlie, Virginia, October 9-13, 1995 (Houston, TX: NACE
International, 1996): pp. 223-257
232. R. B. Rebak, Z. Xia and Z. Szklarska-Smialowska, “Effect of Temperature and Cold
Work on the Crack Growth Rate of Alloy 600 in Primary Water,” Corrosion, 51 (1995):
pp. 689-697

22
233. R. B. Rebak and Z. Szklarska-Smialowska, “About the Mechanism of Stress Corrosion
Cracking of Alloy 600 in High Temperature Water,” in Proceedings of the Seventh
International Symposium on Environmental Degradation of Materials in Nuclear Power
Systems - Water Reactors, Breckenridge, CO, August 7-10 1995 (Houston, TX: NACE
International, 1995): pp. 855-865
234. R. B. Rebak and Z. Szklarska-Smialowska, “Prediction of Crack Growth Rate in Service
from Accelerated Tests in Laboratory for Steam Generator Alloy 600 Tubing,” in
Proceedings of the International Symposium on Plant Aging and Life Prediction of
Corrodible Structures, Sapporo, Japan, May 15-18 1995, Paper A II 15 (Houston, TX:
NACE International, 1997): pp. 257-264
235. R. B. Rebak and Z. Szklarska-Smialowska, “Effect of Specimen Thickness on Cracking
Susceptibility of Alloy 600 in High Temperature Water,” Corrosion, 51 (1995): pp. 376-
379
236. R. B. Rebak, Z. Xia, R. Safruddin and Z. Szklarska-Smialowska, “Electrochemical
Processes Controlling SCC of Underground Pipelines,” Paper 184, Corrosion '95,
Orlando, Florida, March 26-31, 1995 (Houston, TX: NACE International, 1995): 17
pages
237. R. B. Rebak and Z. Szklarska-Smialowska, “Influence of Stress Intensity and Loading
Mode On Intergranular Stress Corrosion Cracking of Alloy 600 in Primary Waters of
Pressurized Water Reactors,” Corrosion, 50 (1994): pp. 378-393
238. R. B. Rebak, Z. Szklarska-Smialowska and Z. Xia, “Stress Corrosion Cracking of X-52
Carbon Steel in Dilute Aqueous Solutions,” Corrosion, 50 (1994): pp. 334-338
239. R. B. Rebak, Z. Szklarska-Smialowska, Z. Xia, and P. Skulte, “Susceptibility of Low
Alloy Carbon Steel to Pitting and Stress Corrosion Cracking in Steam Generator
Conditions,” Corrosion, 50 (1994): pp. 279-289
240. R. B. Rebak, Z. Xia, and Z. Szklarska-Smialowska, “Effects of Carbides on
Susceptibility of Alloy 600 to Stress Corrosion Cracking in High-Temperature Water,”
Corrosion, 49 (1993): pp. 867-876
241. R. B. Rebak, A. R. McIlree, and Z. Szklarska-Smialowska, “Effects of pH and Stress
Intensity on Crack Growth Rate in Alloy 600 in Lithiated + Borated Water at High
Temperatures,” in Proceedings of the Fifth International Symposium on Environmental
Degradation of Materials in Nuclear Power Systems - Water Reactors, Monterey, CA,
August 25-29, 1991 (La Grange Park, IL: American Nuclear Society, 1992): pp. 511-517
242. R. B. Rebak and Z. Szklarska-Smialowska, “Effect of Partial Pressure of Hydrogen on
IGSCC of Alloy 600 in PWR Primary Water,” Corrosion, 47 (1991): pp. 754-757
243. R. B. Rebak, Z. Szklarska-Smialowska and A. R. McIlree, “Relationship of Stress
Intensity to Crack Growth Rate of Alloy 600 in Primary Water,” in Proceedings of the
International Symposium FONTEVRAUD II - Volume 1, Royal Abbey of Fontevraud,
France, September 10-14, 1990 (Société Française d'Energie Nucléaire, 1990): pp. 258-
267

23
244. R. B. Rebak and J. R. Galvele, “Stress Corrosion Cracking of a-Brass in Phosphate,
Triphosphate and Pyrophosphate Solutions,” Corrosion Science, 29 (1989): pp. 1003-
1018
245. R. B. Rebak, R. M. Carranza and J. R. Galvele, “The Stress Corrosion Cracking
Mechanism of a-Brass in NaNO2 Solutions,” Corrosion Science, 28 (1988): pp. 1089-
1106
246. R. B. Rebak and J. R. Galvele, “Corrosión Bajo Tensión del Latón en Soluciones de
Fosfatos,” in proceedings of the VIII Reunión Latinoamericana de Electroquímica,
October 31 - November 4 1988, Huerta Grande, Córdoba, Argentina (1988): pp. 543-545
247. R. B. Rebak and J. R. Galvele, “Efecto de los Iones P2O7
-4
y P3O10
-5
Sobre la
Susceptibilidad del Latón a Sufrir Corrosión Bajo Tensión,” in proceedings of the
Jornadas Metalúrgicas, May 11-15, 1987 (Buenos Aires, Argentina: Sociedad Argentina
de Metales, 1987): pp. 27-29
248. R. B. Rebak and J. R. Galvele, “Susceptibilidad a la Corrosión Bajo Tensión del Latón
en Soluciones de KSCN,” in proceedings of the Jornadas Metalúrgicas, May 11-15, 1987
(Buenos Aires, Argentina: Sociedad Argentina de Metales, 1987): p. 23-26
249. R. B. Rebak, R. M. Carranza, and J. R. Galvele, “Corrosión Bajo Tensión de Alfa
Latones en Soluciones de Nitrito,” in proceedings of the III Jornadas Nacionales de
Corrosión, October 22-24 1986, (Santa Fe, Argentina: Asociación Argentina de la
Corrosión, 1986): pp. 52-60
250. R. B. Rebak, R. M. Carranza and J. R. Galvele, “Influencia de la Concentración de NO2
-
y del pH Sobre la Velocidad de Propagación de Fisuras en Latones,” in proceedings of
the Jornadas Metalúrgicas, May 5-7, 1986 (Buenos Aires, Argentina: Sociedad Argentina
de Metales, 1986)

24
Presentations in International Conferences/Workshops
And Invited Seminars
(Abstracts or Overhead Copies Published) in descending chronological order
1. R. B. Rebak, “Advanced Steels for Accident Tolerant Fuel Cladding in Current Light
Water Reactors,” invited seminar presented at the NACE International Instituto Sabato
Student Section, Atomic Energy Commission of Argentina, Buenos Aires 25-Nov-2014
2. R. B. Rebak, “Accident Tolerant Alloys for Extreme Nuclear Applications,” presented at
the 2014 Materials Science and Technology Meeting (MS&T’14), 15 October 2014,
Pittsburgh, PA, USA
3. N. S. Zadorozne, C. M. Giordano, A. E. Ares, R. M. Carranza, and R. B. Rebak,
“Environmentally Assisted Cracking of Nickel Alloys in Aqueous Solutions Containing
Bicarbonate and Chloride,” presented at the 2014 Materials Science and Technology
Meeting (MS&T’14), 16 October 2014, Pittsburgh, PA, USA
4. P. L. Andresen and R. B. Rebak, “Environmentally Assisted Cracking Resistance of
Alloys Candidate for Accident Tolerant Cladding in Light Water Reactors,” presented at
the 2014 Materials Science and Technology Meeting (MS&T’14), 15 October 2014,
Pittsburgh, PA, USA
5. Y. J. Kim, E. J. Dolley, and R. B. Rebak, “High Temperature Water Behavior of
Advanced Steels for Accident Tolerant Fuel Cladding in Light Water Reactors,” IAEA
Technical Meeting “Accident Tolerant Fuel Concepts For Light Water Reactors” ORNL,
Oak Ridge, TN 13-16 October 2014
6. G. Sundararajan and R. B. Rebak, “Electrochemical Behaviour of Protective Coatings in
Chloride Solutions,” Paper 7590 presented at Eurocorr 2014, Pisa, Italy, 08-12 Sep-2014
7. R. B. Rebak, “Accident Tolerant Advanced Steels Cladding for Commercial Light Water
Reactors Fuel,” presented at FCRD Advanced Fuels Campaign Integration Meeting,
Energy Innovation Laboratory, INL, Idaho Falls, ID, 26-Aug2014
8. R. B. Rebak, “Electrochemical Behavior of Advanced Steels for ATF Cladding under
Simulated Normal Operation Conditions,” presented at the Electric Power Research
Institute (EPRI) Fuel Reliability Program Meeting, Baltimore MD, 15-July-2014
9. R. B. Rebak, “Electrochemical Processes Controlling Localized Corrosion of Passivating
Nickel Alloys,” invited seminar presented at The Electrochemical Society Student
Chapter at the University of Virginia, 01-Jul-2014
10. R. B. Rebak, “Ferritic Steels for Accident Tolerant Fuel Cladding in Commercial Light
Water Reactors,” invited seminar presented at Spring Symposium “Materials for Extreme
Applications,” Eastern New York Chapter of ASM International, 14-May-2014
11. R. B. Rebak, “Advanced Steels as Accident Tolerant Fuel Cladding in Commercial Light
Water Reactors,” invited seminar presented at 247th
American Chemical Society (ACS)
National Meeting, Symposium Chemistry and Materials for Energy, Dallas, TX, 16-
March-2014

25
12. R. B. Rebak, “Alloy Selection for Accident Tolerant Fuel Cladding in Commercial Light
Water Reactors,” presented at the 143rd
TMS Annual Meeting, Symposium on Materials
and Fuels for the Current and Advanced Nuclear Reactors III, San Diego, CA, 18-
February-2014
13. R. B. Rebak, “Recent Developments in Oil and Gas Production,” presented at the 143rd
TMS Annual Meeting, Symposium on Materials Aspects of Corrosion and Fouling in Oil
Refining and Exploration, San Diego, CA, 19-February-2014
14. R. B. Rebak, “Advanced Steels for Accident Tolerant Fuel Cladding in Commercial
Nuclear Reactors,” invited seminar presented at Western University, London, ON,
Canada, 26-November-2013
15. R. B. Rebak, “Corrosion Behavior of Container Alloys in Nuclear Waste Repositories,”
presented at the 2013 Materials Science and Technology Meeting (MS&T’13), Montréal,
Canada, 28-October-2013
16. N. S. Zadorozne, C. M. Giordano, A. E. Ares, R. M. Carranza, and R. B. Rebak, “Stress
Corrosion Cracking of Nickel Alloys in Bicarbonate Solutions,” presented at the 2013
Materials Science and Technology Meeting (MS&T’13), Montréal, Canada, 28-October-
2013
17. M. A. Rodriguez, C. M. Giordano, R. M. Carranza, M. Iannuzzi, and R. B. Rebak,
“Repassivation Potential for Localized Corrosion and the Onset for Stress Corrosion
Cracking,” presented at Eurocorr 2013, Estoril, Portugal, 02-September-2013
18. R. B. Rebak, “Specific uses of nickel alloys in corrosive environments,” 13th
International Congress on Science and Technology of Materials, Port Iguazú, Misiones,
Argentina, 20-23 August 2013
19. R. B. Rebak, “Ferritic Martensitic Alloys as Accident Tolerant Fuel (ATF) Cladding
Material for Light Water Reactors,” presented at FCRD Advanced Fuels Campaign
Integration Meeting, Salt Lake City, Utah, 27-Aug2014
20. R. B. Rebak, “GE Experience in LWR Coating Research,” presented at Fuel Cycle
Research and Development Advanced Fuels Campaign Cladding-Coating Operational
Meeting, Oak Ridge National Laboratory, Oak Ridge, TN, 12-13 February-2013
21. R. B. Rebak, “Environmental Cracking of Chromium Containing Alloys in High
Temperature Water,” presented at the 2012 Materials Science and Technology Meeting
(MS&T’12), 07-11 October 2012, Pittsburgh, PA, USA
22. N. S. Zadorozne, C. M. Giordano, R. M. Carranza, A. E. Ares, and R. B. Rebak,
“Environmental Cracking of Nickel Alloys in Bicarbonate and Chloride Solutions,”
presented at the 2012 Materials Science and Technology Meeting (MS&T’12), 07-11
October 2012, Pittsburgh, PA, USA
Generation and Nuclear Waste Disposal,” presented at the 2012 Materials Science and
Technology Meeting (MS&T’12), 07-11 October 2012, Pittsburgh, PA, USA

26
Generation and Nuclear Waste Disposal,” presented at the Eurocorr 2012, Istanbul,
Turkey, 09-13-September-2012
25. R. B. Rebak, “Fallout from Fukushima,” invited speaker to the 224X Corrosion in
Nuclear Systems committee meeting during Corrosion/2012, 11-15 March 2012 in Salt
Lake City - UT (NACE International, 2012: Houston, TX)
26. P. L. Andresen, T. B. Jurewicz and R. B. Rebak, “Environmentally Assisted Cracking
Resistance of Ferritic Chromium Steels in High Temperature Water,” presented at the
symposium “Materials Science Challenges for Nuclear Applications” during
MS&T’2011 Conference and Exhibition in Columbus, OH, 16-20 October 2011.
27. M. A. Rodriguez, R. M. Carranza, and R. B. Rebak, “Ground Water Inhibitors of
Localized Corrosion in Passivating Alloys” presented at the symposium “Materials for
Nuclear Waste Disposal and Environmental Cleanup” during MS&T’2011 Conference
and Exhibition in Columbus, OH, 16-20 October 2011.
28. R. B. Rebak, “Corrosion, Materials and the Nuclear Renaissance,” presented at the
“NACE Northern Area Eastern Conference - Ottawa, Ontario, Canada 15-17 August
2011
29. P. L. Andresen and R. B. Rebak, “Stress Corrosion Cracking Behavior of Ferritic and
Austenitic Stainless Steels in High Temperature Water” presented at the symposium
“Materials for the Nuclear Renaissance II,” during the 2011 TMS Annual Meeting &
Exhibition, San Diego – CA, 27 February to 03 March 2011
30. R. B. Rebak, “A Materialistic Career,” presented at RPI Material Advantage’s Career
Night, Rensselaer Polytechnic Institute, Troy, NY 07-February-2011.
31. R. B. Rebak, “Engineering Materials Selection for Nuclear Waste Repositories in the
USA and in the World,” invited presentation at the Graduate Seminar, Alfred University,
Alfred - NY, 02 December 2010
32. P. H. Chou and R. B. Rebak, “Electrochemical and Stress Corrosion Cracking Behavior
of Stainless Steels Containing Silicon,” presented at the International Cooperative Group
on Environmentally Assisted Cracking of Water Reactor Materials (ICG-EAC), Haevichi
Hotel on Jeju Island in the Republic of Korea, 11-16 April 2010
33. R. B. Rebak, “Is there a Nuclear Renaissance?,” invited speaker to the 224X Corrosion
in Nuclear Systems committee meeting during Corrosion/2010, 11-18 March 2010 in San
Antonio, TX (NACE International, 2010: Houston, TX)
34. R. B. Rebak, “Materials Selection for Nuclear Waste Repositories Worldwide,” invited
presentation to the Northeastern New York Section of the American Nuclear Society at
the Rensselaer Polytechnic Institute (RPI) – Linac (Linear Accelerator), Troy – NY, 03
March 2010
35. R. B. Rebak, “Comparative Plant Performance of Stabilized and Non-Stabilized
Austenitic Stainless Steels,” presented at the symposium Mechanical Performance for
Current and Next-Generation Nuclear Reactors during the 2010 TMS Annual Meeting &
Exhibition, Seattle – WA, 14-18 February 2010

27
36. R. B. Rebak, “Environmental Degradation of Materials in Light Water Reactors – Stress
Corrosion Cracking of Nickel Based Alloys,” invited plenary speaker at the 9th
International Congress of Materials organized by the Sociedad Argentina de Materiales
(SAM) and the Sociedad Chilena de Materiales (SOCHIM), 19-23 October 2009, Buenos
Aires, Argentina
37. R. B. Rebak, “Corrosion Testing in the Nuclear Power Industry,” plenary invited speaker
at the 5th
Annual Northeast NACE Corrosion Conference, 20-22 January 2009 in
Springfield, MA Section of NACE International, North-Eastern New York
38. R. B. Rebak, “Corrosion Testing of Nickel and Titanium Alloys for Nuclear Waste
Disposition,” invited speaker to the Research Topical Symposium Corrosion in Nuclear
Waste Systems during Corrosion/2008, 16-20 March 2008 in New Orleans, LA
39. D. V. Fix and R. B. Rebak, “Decommissioning the Long-Term Corrosion Test Facility
For the Yucca Mountain Project,” presented in the symposium “Degradation of Materials
for Application in Nuclear Power and Waste Management Systems” at the Materials
Science and Technology 2007 (MS&T’07) Conference and Exhibition in Detroit, MI, at
the COBO Center on 16-20 September 2007
40. T. Lian, J. A. Rard, K. J. Staggs, S. A. Carroll and R. B. Rebak, “Corrosion Studies of
Alloys 22 and 825 under Thin Brine Films at 105°C,” presented at the Research in
Progress Symposium of the NACE International Corrosion/2007 Conference and
Exposition, 11-15 March 2007, Nashville, TN
41. R. B. Rebak, L. Aprigliano, S. Day, J. Haslam and J. Farmer “Salt Fog Testing of Iron
Based Amorphous Alloys,” presented at the Materials Issues for Advanced Nuclear
Systems symposium at the 136th
Annual TMS meeting, 25 February to 01 March 2007 in
Orlando, FL
42. R. B. Rebak, “Corrosion Behavior of C-22 and other Nickel alloys,” invited speaker
Fontana Corrosion Center, The Ohio State University organized by the local student
chapter of The Electrochemical Society, Columbus, Ohio 18-October-2006
43. D. V. Fix, K. J. King, J. C. Estill and R. B. Rebak, “Corrosion Behavior of Welded
Plates of Alloy 22 with Varying Heat Composition,” TMS 2005 Annual Meeting, San
Francisco, CA 13-17 February 2005 (TMS, 2005: Warrendale, PA)
44. A. Yilmaz, D. V. Fix, J. C. Estill, L. L. Wong and R. B. Rebak, “Effect of Stress
Mitigation on the Corrosion Behavior of Alloy 22,” TMS 2005 Annual Meeting, San
45. R. B. Rebak, “Monitoring the Evolution of the Corrosion Potential and Corrosion Rate
of Alloy 22 Immersed in Various Electrolyte Solutions,” TMS 2005 Annual Meeting, San
46. A. Yilmaz, D. Chandra and R. B. Rebak, “Investigation of Portevin Le Chatelier Effect
by Electrochemical Techniques: Correlation Between Dynamic Strain Aging and Metal-
Electrolyte Interface Potentials,” MS&T’04, New Orleans, LA 26-29 September 2004
(TMS, 2004: Warrendale, PA)

28
47. K. J. Evans, L. L. Wong and R. B. Rebak, “Corrosion Testing of Nickel and Titanium
Alloys,” TMS 2004 Annual Meeting, Charlotte, NC 14-18 March 2004 (TMS, 2004:
Warrendale, PA)
48. F. M. G. Wong, R. B. Rebak, L. A. Hackel, H-L. Chen, T. F. Soules, R. M. Yamamoto,
J. E. Rankin, M. R. Hill and A. T. DeWald, “Minimizing the Potential for Stress
Corrosion Cracking in Welds of Nuclear Waste Package using Laser Peening,”
MS&T’03, Chicago, IL, November 09-12 2003 (TMS, 2003: Warrendale, PA)
49. R. B. Rebak, “Corrosion Resistant Materials for Yucca Mountain Nuclear Waste
Containers,” invited speaker at the San Francisco Bay Area Section of NACE
International, 07th
May 2002
50. R. B. Rebak, “Localized Corrosion of Waste Package Materials,” presented at the
Interim Meeting of the Peer Review Panel, US Department of Energy, Office of Civilian
Radioactive Waste Management, Las Vegas, Nevada, September 25, 2001
51. R. B. Rebak, “Nickel Alloys for Aggressive Environments,” invited speaker at the
Niagara-Frontier Section of NACE International, Monthly meeting, January 18, 2000.
52. R. B. Rebak, P. Crook and K. Ravindranath, “Nickel Based Alloys for Aggressive
Environments,” presented at the Workshop on Emerging Materials for Chemical Process
Industries, Engineers India Limited, New Delhi, India, December 6-7, 1999
53. R. B. Rebak, “Alloy Selection for Highly Corrosive Environments: Metallurgical and
Environmental Factors,” in Materials and Process Selection in Design, ASM Materials
Solutions, Cincinnati, Ohio, November 1999. Extended abstract published in Advanced
Materials and Processes, 156, October 1999. pp.: 71-72
54. R. B. Rebak, “Effect of Long Term Aging on the Property of C-22, C-4 and C-276 alloys
Weldments,” in the Workshop on the Fabrication and Welding of Nickel Alloys and
Other Materials for Radioactive Waste Containers, Las Vegas, Nevada, October 27-28,
1998
55. R. B. Rebak, “Localized Corrosion Resistance of HASTELLOY C-22, C-4 and C-276
Alloys as Candidate Materials for Nuclear Waste Repository: Effect of Alloy Aging at
427°C for up to 40,000 h,” Poster presented at the 1998 Gordon Research Conference on
Aqueous Corrosion, New London, New Hampshire, July 5-10, 1998
56. R. B. Rebak, “Candidate Materials for High Level Nuclear Waste Containers in Yucca
Mountain,” invited speaker to the Graduate Seminar Series in the Department of
Chemical Engineering of the University of Notre Dame, April 14, 1998
57. R. B. Rebak, “Corrosion Behavior of Nickel and Iron Base Alloys in Hydrofluoric
Acid,” invited speaker at the Corrosion/98 NACE International Task Group T-5A-36
Committee Meeting, San Diego, California, March 26, 1998
58. R. B. Rebak, “Mechanical Properties and Mechanical Resistance of Ni-Cr-Mo Alloys
after Aging at 427°C for 40,000 h,” invited speaker in the Workshop on Phase Stability in
Nickel Alloys for Radioactive Waste Containers, Sand Diego, California, March 19-20,
1998

29
59. R. B. Rebak and Z. Szklarska-Smialowska, “Effect of Mode of Loading on the SCC of
Alloy 600 in High Temperature Water, “ in Corrosion Research in Progress Symposium,
Session 3: Environmentally Assisted Cracking, Corrosion/94, Baltimore, Maryland,
February 27 March 4, 1994
60. R. B. Rebak, Z. Xia, and Z. Szklarska-Smialowska, “The Role of Carbides on Stress
Corrosion Cracking Susceptibility of Alloy 600 in High Temperature Water,” in
Corrosion Research in Progress Symposium, Session 3: Environmentally Cracking,
Corrosion/93, New Orleans, Louisiana, March 7-12, 1993
61. R. B. Rebak, “Stress Corrosion Cracking of Alloy 600 in Steam Generator Conditions,”
invited speaker at the Universidad de Buenos Aires, December 1992
62. R. B. Rebak and Z. Szklarska-Smialowska, “Crack Growth Rate in Alloy 600 in
Pressurized-Water-Reactor Primary Water,” in Corrosion Research in Progress
Symposium, Session 3: Environmentally Assisted Cracking, Corrosion/90, Las Vegas,
Nevada, April 23-27 1990
63. R. B. Rebak, “Susceptibilidad a la Corrosión Bajo Tensión del Latón en Soluciones de
Polifosfatos. I. Pirofosfato,” in proceedings of the V Congreso Argentino de
Fisicoquímica, April 27-30 1987, Mar del Plata, Argentina (1987)

2014 12 22 Rebak Publications

Recommended

Recommended

More Related Content

Similar to 2014 12 22 Rebak Publications

Similar to 2014 12 22 Rebak Publications (20)

2014 12 22 Rebak Publications