This document provides instructions for displaying a car at a dealership, including dimensions for the overall display and platform. It describes using a wooden platform with plywood top, ribbon and bow made of satin cloth, printed vinyl on sunboard, and mdf edging painted black. Branding involves positioning a 34x12.6 inch logo on the side and front of the display.

1. CAR DISPLAY INSTRUCTION MANUAL

2. 1S DEALERSHIP - CAR DISPLAY
18ft length x 8ft width x 2ft height
SAMPLE DISPLAY IMAGES

3. OVERALL DIMENSIONS
18ft length 8ft width
4ft x 4ft Bow
1ft width
satin
6 inch height
behind
2ftheight

4. PLATFORM DIMENSIONS
SIDE PROFILE
2ftheight
6inch
height
18 ft width
8 ft width
1 ft x 1 ft
FRONT PROFILE
2ftheight

5. MATERIALS IN USE
1
1
2
2
3
3
Wooden Platform with Ply top:
1.The Platform should have ample support to hold the car weight.
2.Place a white flex on the floor as a base for the platform to avoid direct contact which may cause
damages or scratches.
3.The Flex should be cut later to the platform size.
Ribbon with Bow
1.Use Satin cloth to create a ribbon of 1ft width around the car covering the rear doors
only.
2.Create a Bow Unit (4ft Diameter) with satin using thin sunboards as inserts to avoid a
flat bow.
5mm White sunboard with Matt Vinyl Print
1 inch MDF beading with black paint finish around the top and bottom of the platform
Ply top with a Black/ Dark Grey carpet

6. BRANDING
logo size : 34inch x 12.6inch
SIDE BRANDING WITH POSITION
FRONT BRANDING
27 inch
1.5 inch
2.5 inch
1 inch mdf bead
1 inch mdf bead

7. 3S DEALERSHIP - CAR DISPLAY
18ft length x 12ft width x 2ft height
18ft length 12ft width
4ft x 4ft Bow
1ft width
satin
6 inch height
behind
2ftheight

8. PLATFORM DIMENSIONS
SIDE PROFILE
2ftheight
6inch
height
18 ft width
12ft width
1 ft x 1 ft
FRONT PROFILE
2ftheight

9. BRANDING
logo size : 34inch x 12.6inch
SIDE BRANDING WITH POSITION
FRONT BRANDING
27 inch
1.5 inch
2.5 inch
1 inch mdf bead
1 inch mdf bead