Advantages of HF technology: Optimal availability for use and long service life can only be achieved from motive power batteries when the battery and the charger are perfectly matched. The HF technology provides: compact wall-mounted designs to save floor space. Significantly higher electrical performances. Shorter recharge time, saving energy, reduction of the batteries temperature during the cycle, strong reduction of the Co2 emissions, lower water consumption, which helps prolong the life of the batteries. High production yield. Soft start mode, customized charge curve on request. Black Hawk is a versatile device, different charging curve software could be installed for a specific customized charging profile for any type of battery. Usage: Suitable for the cyclic recharge of lead - acid batteries and floating of sealed gel and / or lead - acid batteries. Optional Air pump available Download data available trough PC/Laptop
1. PtekHB1
uso ottimale: batteria e caricatore si
devono combinare perfettamente.
tecnologia HF: design compatto,
montaggio a parete, prestazioni
elettriche di alto livello (tecnologia full
switching design, controllo digitale a
microprocessore).
tempi di ricarica: ridotti, risparmio
energetico, vantaggi economici, alto
rendimento con brevi tempi per recupero
investimento.
alto rendimento - modalità soft start,
curve di ricarica personalizzate a richiesta.
temperatura batteria: ridotta durante
il ciclo di ricarica, minori emissioni di
Co2, minor consumo d’acqua, durata
vita media batterie più lunga, idoneo per
tutti i tipi di batterie (piombo acido, gel,
ermetiche, AGM, Lipo,etc…)
personalizzazione curve: tramite
software, dispositivo molto versatile,
contraddistinto da un ripple di uscita
residuo trascurabile, protezioni di
ingresso e uscita, dotati di controllo di
sovratemperatura con display tipo LCD
grafico monocromatico.
Impiego:
adatto per ricarica ciclica batterie piombo
e/o carica di mantenimento batterie gel
e/o piombo, Lipo.
Disponibile anche versione “AIR Mix”
(opzionale), e software per download dati
attraverso la connessione a PC/Laptop
Advantages of HF technology:
Optimal availability for use and long
service life can only be achieved from
motive power batteries when the battery
and the charger are perfectly matched.
The HF technology provides:
compact wall-mounted designs to save
floor space. Significantly higher electrical
performances. Shorter recharge time,
saving energy, reduction of the batteries
temperature during the cycle, strong
reduction of the Co2 emissions, lower
water consumption, which helps prolong
the life of the batteries. High production
yield. Soft start mode, customized
charge curve on request. Black Hawk is a
versatile device, different charging curve
software could be installed for a specific
customized charging profile for any type
of battery.
Usage: Suitable for the cyclic recharge
of lead - acid batteries and floating of
sealed gel and / or lead - acid batteries.
Optional Air pump available
Download data available
trough PC/Laptop
U
U
I
t
U I
t
Iua IUIa
Tensione/Voltage
Spannung/Tension
Corrente/Current
Storm/Courant
I
Tensione/Voltage
Spannung/Tension
Corrente/Current
Storm/Courant
PteK HB1 - Monofase - Single Phase
V Ah
24 36 48 7÷8 h 9÷12 h
A
250÷290 335÷440
300÷350 420÷535
60A 60A 60A 360÷420 495÷630
70A 70A 70A 430÷490 580÷730
80A 80A 80A 500÷560 675÷860
520÷600 680÷915
100A 100A 100A 590÷690 850÷1000
120A 120A 720÷840 1000÷1200
Conformità alle direttive 89/336/CEE e
72/23/CEE e marcatura .
Conformity to the directives 89/336/
CEE and 72/23/CEE . marking
PteK srl. - Via Tazio Nuvolari, 5 - 47843 - Misano Adriatico (RN) Phone/Fax: +39 0541 610 793 - info@ptek-hf.com
Modello PteK HB1 monofase Ptek HB1 model single phase
230 Vca ± 10%, monofase, 50 – 60 Hz, rendimento: ~ 90%, temperatura
funzionamento da – 20 a + 45 °C, corrente assorbita dalla batteria 0 A in caso di
rete collegata, protezione contro cortocircuito in uscita con fusibile, protezione
per l’inversione di polarità con fusibile, protezione termica semiconduttori, protezione
ingresso con fusibili e varistori, curva carica programmabile e impostabile a piacere
con default IU IA, visualizzazione e letture con display LCD 2x20 monocromatico –
LED, segnalatore acustico di allarme, spia stato carica multicolore, compensazione
termica con sonda opzionale, contatti ausiliari opzionali 2 configurabili (presenza,
rete, carica terminata, comando pompa, etc…), ventilazione forzata, contenitore
metallico di dimensioni 490 x 360 x 150 mm, peso 11 kg, protezione IP20, conforme
ai requisiti della Direttiva Bassa Tensione 73/23/CEE e della Direttiva EMC 89/336/
CEE e loro successive modificazioni.
230 Vca ± 10%, mono-phase, input Frequency 50 – 60 Hz, efficiency ~ 90%,
operating Temperature from– 20 to + 45 °C, current Drawn by the Battery 0
A if network electrically bonded, protection against Output Short-circuit with
fuse, protection against Polarity Reversal with
fuse, thermal Protection Semi-conductors, input
Protection with fuses and varistors, charge curve
programming and settings at will with default IU
IA, displaying and Messages with monochromatic
2x20 LCD display – LED, audible alarm device,
state charge Indicator multicolours, thermal
compensation with optional probe, 2 auxiliary
contacts optional configuration at will (mains
presence, finished charge, control pump, etc…),
ventilation forced air circulation, metallic ontainer
with dimensions 490 x 360 x 150 mm, weight
11 kg, protection IP20, in conformity with the
Low Voltage Directive 73/23/CEE and the EMC
directive 89/336/CEE and their successive
amendments.
Altre curve su richiesta Available curve on request
LCD LED