Pete Scoffin CV
•Download as DOC, PDF•
1 like•356 views
Peter Richard Scoffin is a British national born in 1953 who has over 30 years of experience as a Senior Electrical Commissioning Engineer, specializing in high voltage protection and control systems up to 132kV. He received an HNC in Electrical and Electronic Engineering in 1976 and has worked at Brush Electrical Machines since 1986, supervising the installation, commissioning, and troubleshooting of high voltage systems at power stations, refineries, and oil rigs in the UK and overseas. Examples of his commissioning projects include gas turbines and a combined cycle power station.
Report
Share
Report
Share
Recommended
Ppt on 400 kv gss raiser Bikaner- Yatendra Parashar
This document provides an overview of a training presentation on 400kV substations. It discusses:
1) The general components and purpose of substations for transforming voltage from transmission to distribution systems.
2) Details of the 400kV substation including its incoming and outgoing transmission lines carrying voltages of 400kV and 220kV.
3) The key equipment used in substations like power transformers, circuit breakers, instrument transformers, insulators, and isolators.
400 Kv Soja
The document provides an overview of the key components and functions of a substation. It describes how a substation receives power from generators or transmission lines and delivers it to other lines with or without transformation. The main equipment in a substation includes transformers, circuit breakers, isolators, current transformers, potential transformers, capacitors, reactors, control panels, relay panels, and battery sets. It provides brief descriptions of each component and their purposes in the substation system.
Presentation cs electric on Electrical Installation Product We touch every ...
Important for Electrical Vehicle Power Infrastructure, Smart City Project ,Smart Intelligence Pole, Power T&D,Solar PV Power ,High Energy Storage Battery Systems, PMAY Projects,Sagarmala Project,DFCC,Metro Rail Projects,High Speed Bullet Train , Green Building Infra , Modern Airports Infra,Station Building Development Infra,DMIICC,Municipal Corporation ,Project AMRUT,PDIL,EIL.MECON ,NBCC,EPIL,IOCL,PGCIL,REC,BIS,CEA,Telecom Engineering Centre,BSNL,MTNL,RDSO,Indian Railway Board,EESL, All Electric Car and Bus Manufacturer
Substation
1. The document summarizes the key components and functions of a 132KV Gomal University Grid station substation. It describes equipment like incoming transmission lines at 132KV, transformers to step down voltage, circuit breakers, switch gears, isolators, lighting arresters, capacitor banks, bus bars, cables, and insulators.
2. The substation contains a control room with auxiliary panels, relay panels, and control panels to monitor and protect the overall system. It also has a switch gear room and DC battery room.
3. Power enters the substation via high voltage transmission lines, is stepped down by transformers, then exits to distribution lines at lower voltages to deliver electricity to customers. The substation monitors
industrial Training report in PTCUL Substation dehradun
This document provides a summary of Surendra Singh Rawat's industrial training report submitted to G. B. Pant Engineering College. It includes an introduction to Power Transmission Corporation of Uttarakhand (PTCUL), an overview of Uttarakhand's power transmission system, and details of the 132kV substation in Lal Tappar where Rawat completed his training. The report describes the major equipment in the substation including switchyard components like surge arresters, instrument transformers, isolators, circuit breakers, and the 40MVA transformer. It also mentions the control room, PLC room, and battery room.
220kv grid wapda town lahore
It is Multimedia presentation made by Abdul Samad, An Electrical Engineer From UET Lahore Pakistan. For queries contact Abdulsamad.pisces@hotmail.com
Hope u find it useful
My ppt
This document describes a layout study for a 220kv/132kv/33kv substation in Chillakallu. It lists the project members and their guides. It then outlines the contents which will cover the layout, switchgear and protection equipment, bus bars, transformers, and earthing. Diagrams are included showing the single line diagram of the substation. Sections provide details on instrument transformers, circuit breakers, protective relays, lightning arresters, isolators, insulators, and bus bars.
Shubham chamoli 132 kv substation presenttation
This document provides an overview of a 132/33 kV substation and its components. It discusses the key challenges faced by power engineers in maintaining a stable power system. The substation contains blocks like the switchyard and control room. Components shown on a single line diagram include transformers, circuit breakers, busbars, insulators, and current transformers. Transformers are used for voltage transformation between 132 kV and 33 kV levels. Circuit breakers and relays protect the system during faults. The presentation concludes with a diagram of a 33 kV substation layout including a 40 MVA transformer.
Recommended
Ppt on 400 kv gss raiser Bikaner- Yatendra Parashar
This document provides an overview of a training presentation on 400kV substations. It discusses:
1) The general components and purpose of substations for transforming voltage from transmission to distribution systems.
2) Details of the 400kV substation including its incoming and outgoing transmission lines carrying voltages of 400kV and 220kV.
3) The key equipment used in substations like power transformers, circuit breakers, instrument transformers, insulators, and isolators.
400 Kv Soja
The document provides an overview of the key components and functions of a substation. It describes how a substation receives power from generators or transmission lines and delivers it to other lines with or without transformation. The main equipment in a substation includes transformers, circuit breakers, isolators, current transformers, potential transformers, capacitors, reactors, control panels, relay panels, and battery sets. It provides brief descriptions of each component and their purposes in the substation system.
Presentation cs electric on Electrical Installation Product We touch every ...
Important for Electrical Vehicle Power Infrastructure, Smart City Project ,Smart Intelligence Pole, Power T&D,Solar PV Power ,High Energy Storage Battery Systems, PMAY Projects,Sagarmala Project,DFCC,Metro Rail Projects,High Speed Bullet Train , Green Building Infra , Modern Airports Infra,Station Building Development Infra,DMIICC,Municipal Corporation ,Project AMRUT,PDIL,EIL.MECON ,NBCC,EPIL,IOCL,PGCIL,REC,BIS,CEA,Telecom Engineering Centre,BSNL,MTNL,RDSO,Indian Railway Board,EESL, All Electric Car and Bus Manufacturer
Substation
1. The document summarizes the key components and functions of a 132KV Gomal University Grid station substation. It describes equipment like incoming transmission lines at 132KV, transformers to step down voltage, circuit breakers, switch gears, isolators, lighting arresters, capacitor banks, bus bars, cables, and insulators.
2. The substation contains a control room with auxiliary panels, relay panels, and control panels to monitor and protect the overall system. It also has a switch gear room and DC battery room.
3. Power enters the substation via high voltage transmission lines, is stepped down by transformers, then exits to distribution lines at lower voltages to deliver electricity to customers. The substation monitors
industrial Training report in PTCUL Substation dehradun
This document provides a summary of Surendra Singh Rawat's industrial training report submitted to G. B. Pant Engineering College. It includes an introduction to Power Transmission Corporation of Uttarakhand (PTCUL), an overview of Uttarakhand's power transmission system, and details of the 132kV substation in Lal Tappar where Rawat completed his training. The report describes the major equipment in the substation including switchyard components like surge arresters, instrument transformers, isolators, circuit breakers, and the 40MVA transformer. It also mentions the control room, PLC room, and battery room.
220kv grid wapda town lahore
It is Multimedia presentation made by Abdul Samad, An Electrical Engineer From UET Lahore Pakistan. For queries contact Abdulsamad.pisces@hotmail.com
Hope u find it useful
My ppt
This document describes a layout study for a 220kv/132kv/33kv substation in Chillakallu. It lists the project members and their guides. It then outlines the contents which will cover the layout, switchgear and protection equipment, bus bars, transformers, and earthing. Diagrams are included showing the single line diagram of the substation. Sections provide details on instrument transformers, circuit breakers, protective relays, lightning arresters, isolators, insulators, and bus bars.
Shubham chamoli 132 kv substation presenttation
This document provides an overview of a 132/33 kV substation and its components. It discusses the key challenges faced by power engineers in maintaining a stable power system. The substation contains blocks like the switchyard and control room. Components shown on a single line diagram include transformers, circuit breakers, busbars, insulators, and current transformers. Transformers are used for voltage transformation between 132 kV and 33 kV levels. Circuit breakers and relays protect the system during faults. The presentation concludes with a diagram of a 33 kV substation layout including a 40 MVA transformer.
220 KV Substation Operation & Maintenance
The document discusses substations and their components. It defines a substation as an assembly of apparatus that transforms electrical energy from one form to another, such as changing voltage levels. Substations contain step-up transformers to increase voltage for transmission and step-down transformers to decrease voltage for distribution to consumers. The document describes various types of substations and explains their functions. It also provides details about components within substations such as circuit breakers, transformers, buses, isolators and instrument transformers.
Electrical SUBSTATION ppt
In this presentation talk about:
Able to describe Substation.
Importance of substation.
Factors governing the selection of side.
Classification of Sub-Station.
Elements of a substation.
Operation of substation.
Hazards & safety.
Recent substation accident Bangladesh.
PPT ON 400KV GSS HEERAPURA JAIPUR
1) The document summarizes the practical training of an electrical engineering student at a 400kV grid substation in Heerapura, Jaipur.
2) The substation has a capacity of 250MVA and transforms high voltages from 400kV incoming feeders to lower 220kV voltages on outgoing feeders.
3) The student's training covered various electrical equipment used at substations including transformers, circuit breakers, relays, bus bars, insulators, and their purposes in the transmission and distribution of electrical power.
132kv Substation demo
The document provides a summary of the single line diagram of the 132kv S/S PGIA substation. It has 3 incoming 132kv lines from the 400/220kv Sarojini Nagar substation and 1 outgoing 132kv line. The incoming lines pass through lightning arrestors and insulated discs before connecting to the gantry and circuit breakers. The line then passes through potential transformers and current transformers before connecting to the main bus bar. From the bus bar, the line is distributed to the 132kv bay and transformers through isolators. The substation also includes a 33kv substation with 2 40MVA transformers, 33kv bus bars, and bays. It describes the purpose of components like capacitor banks, isol
Load Distribution
1. Substations are facilities that link power generation stations to transmission systems and distribution systems by increasing or decreasing voltage levels through transformers.
2. Key components of substations include power transformers, current and potential transformers, circuit breakers, isolators, earth switches, lightning arrestors, and wave traps.
3. Power transformers increase or decrease voltage to allow for efficient transmission of power over long distances and distribution to customers, while current and potential transformers adapt measurements to instrumentation.
A report on 220 kv gss mansarovar, jaipur by ravindra kumar goma
This document provides a seminar report on practical training completed at 220 kV G.S.S. Mansarovar, Jaipur. It includes an introduction to the substation, descriptions of its incoming and outgoing feeders, and sections covering various equipment found at the substation like bus bars, isolators, insulators, protective relays, circuit breakers, transformers, and earthing systems. The report also provides technical specifications and ratings for the main equipment.
ESI Electro Service India - Float Cum Battery Charger
This technical presentation provides an overview of float cum boost battery chargers used for standby applications. It discusses:
1) What a float cum boost battery charger is and its role in an uninterruptible DC power supply system.
2) The topologies of float cum boost battery chargers, including single and dual rectifier designs.
3) The technical specifications of thyristor-controlled float chargers, including input/output voltages, regulation, protections, and construction.
4) Salient features of thyristor-controlled float chargers like precise control, temperature compensation, automatic charging profiles, and modular design.
5) Present trends in converter technology moving from thyristor
Project List 1.3-May21,16- Substation Electrical Enginner
This document provides a list of notable power engineering projects and maintenance activities completed by Reza Shah Abadi. It includes several high voltage substation EPC projects providing power for copper mining complexes in Iran. It also lists several medium and low voltage EPC projects at the Sarcheshmeh Copper Complex involving switchgear, protection, automation, transformers, and expanding electrical distribution networks. High voltage transmission line PC projects in Iran are also mentioned. Finally, it lists some maintenance activities done in workshops such as rewinding large electromotor staters and transformers.
Presentation on 132/33KV BSPTCL(Bodhgaya Substation)
The document provides information about the 132/33kV Bodhgaya substation in Bihar, India. It discusses key components of the substation including three transformers ranging from 50-160 MVA, lightning arrestors, current and potential transformers, circuit breakers using oil, air, SF6 and vacuum technologies, isolators, capacitor banks, fuses, and bus couplers connecting generators and feeders to main and spare bus bars. The substation is part of the transmission network operated by Bihar State Power Transmission Company Limited.
Industrial training 220 KV moradabad
Monu Kumar completed an industrial training at a substation guided by Umesh Chand Bharti. The training covered the introduction of UPPTCL and the components of a substation including transformers, circuit breakers, capacitors, and control panels. Substations play an important role in the electricity network by converting voltages so that power can be delivered from generators to homes and workplaces.
Biggie's CV1
This document is a curriculum vitae for Biggie Charuza that outlines his personal details, educational background, work experience, achievements, and references. It details that he has an O-Level in various subjects from Cambridge and qualifications in Electrical Engineering and Microcomputer Technology. His work experience includes positions as a Factory Maintenance Electrician at Denel and Electrical Supervisor at the Civil Aviation Authority Zimbabwe where he oversaw maintenance and repairs. It also lists his training in maintenance, electrical systems, and project involvement refurbishing an airport terminal.
cv-Simon-mccourt-19092016_1
Simon McCourt has over 30 years of experience in electrical contracting and commissioning. He has extensive skills in installation, testing, and commissioning of LV systems, life safety systems, generators, switchgear, and more. Currently, he works as a Senior Project Electrical Commissioning Engineer for Sidra Medical Centre in Qatar, commissioning and validating all essential electrical systems.
Curriculum Vitae
This curriculum vitae is for James Powell, an electrical engineer with over 20 years of experience in high voltage installation, testing, commissioning and maintenance. He has held various roles with increasing responsibility, currently serving as a Senior High Voltage Electrical Engineer. His experience includes working on numerous projects throughout the UK installing, testing and commissioning various high voltage electrical equipment up to 66kV. He manages a team of eleven electrical craftspeople and is responsible for their work planning and safety.
Gowtham resume
Electrical professional with 6 years of experience in O&M (Utility Plants & Substation) - Airport, IT Park
CURRICULUM VITAE Simon McCourt January 2015
This curriculum vitae outlines the qualifications and experience of Simon Paul McCourt, an electrical engineer based in the UK. It summarizes his educational background including an HND in mechanical and electrical engineering and various technical certifications. It also provides an overview of McCourt's extensive work experience over 25+ years as an electrical contractor and commissioning engineer on many commercial, industrial, and infrastructure projects in the UK and Qatar.
Simon cv
My standard of workmanship is considered to be very high and I take pride in my work. I have a sound knowledge of many and varied scopes of work in the electrical industry. I am apprentice trained, having attained HND and City & Guild level qualifications, having skills in all associated fabrication work, various cable and cable techniques, panel interpretation design and wiring experience of AC and DC Switch Gear, Power Factor Control, DC Drives, PLC, Generators, Compressors, Earthing Systems, UPS and IPS Systems, Fire Alarms, Emergency Lighting, Air Conditioning (HVAC), Refrigeration, CCTV, Exterior Lighting and Signage, Door Entry Systems, Alarms (Signal and Intruder), Data Communication, Industrial and Domestic Lighting, Power Distribution, Testing and Commissioning. Verification & validation of LV systems, Life safety systems.
Being a self-employed contractor for most of my working career to date, I am proficient at working in a variety of establishments including Hospitals, Steel & Rolling Mills, Fragmentation Plants, Cement Quarries, Aggregate Plants, Dockyards, Petro-Chemical Plants/Refineries, British Rail, Power Stations, Paper Mills, Commercial/Retail Buildings and Schools.
C 1 .V.
Haissal A. Ghamrawi is a Lebanese electrical engineer born in 1962. He has worked in electrical maintenance and commissioning for ADCO in Abu Dhabi since 1995, involved in projects across their fields. Prior to joining ADCO, he received an engineering degree in thermal power from Polytechnic of Odessa and ran his own electrical contracting business in Lebanon. He is trained in various electrical equipment, systems, and technologies including gas turbines, substations, switchgear, protection relays, and more.
ahmed Hamdy -Resume
Ahmed Mohamed Hamdy Ibrahim Moubarak is an experienced electrical engineer seeking a position with prominent organizations. He has over 15 years of experience in electrical design, project management, and power plant operations. Currently he is the Head of Electricity Section at ASGE in Jubail, where he oversees projects like O&M centers and building rehabilitations. Previously he worked as an electrical designer and site supervisor, and as an operations engineer at a power plant in Egypt. He has expertise in AutoCAD, Microsoft Office, and project management skills.
Curriculum Vitae-1 rev sept(r) 16 with photo
This document is a curriculum vitae for Shiv Ratan Sethia, an electrical engineer with over 27 years of experience in electrical power generation, distribution, and automation systems. It outlines his educational background in electrical engineering and provides details of his work experience managing electrical systems for various chemical and fiber plants in India and Indonesia. It also lists his areas of expertise, responsibilities, completed projects, and references.
Curriculum Vitae-1 rev sept(r) 16 with photo
This document is a curriculum vitae for Shiv Ratan Sethia, an electrical engineer with over 27 years of experience in electrical power generation, distribution, and automation systems. It outlines his educational background in electrical engineering and lists his extensive work experience managing electrical projects and maintenance at various chemical and fiber plants in India and Indonesia. It also provides details of his technical skills and responsibilities overseeing electrical systems, automation, and power plants.
Electrical-Machinery-Fundamentals.pdf
This document provides information about the fourth edition of the textbook "Electric Machinery Fundamentals" by Stephen J. Chapman. It includes details about the author's background and qualifications. The book is dedicated to the author's mother and contains brief contents, table of contents, and information about the publisher. It provides a high-level overview of the textbook's coverage of fundamental principles of electric machinery, transformers, power electronics, AC and DC machines.
Abhishek scada ppt
The document discusses a SCADA system for electrical distribution implemented by Jamshedpur Utilities and Services Company (JUSCO). JUSCO uses a SCADA system monitored from its Network Monitoring and Control Centre (NMCC) to automate power distribution. The document outlines various field equipment in the electrical distribution network like transformers, breakers, buses that are monitored by the SCADA system. It also discusses the communication infrastructure and control room setup used for the SCADA system.
More Related Content
What's hot
220 KV Substation Operation & Maintenance
The document discusses substations and their components. It defines a substation as an assembly of apparatus that transforms electrical energy from one form to another, such as changing voltage levels. Substations contain step-up transformers to increase voltage for transmission and step-down transformers to decrease voltage for distribution to consumers. The document describes various types of substations and explains their functions. It also provides details about components within substations such as circuit breakers, transformers, buses, isolators and instrument transformers.
Electrical SUBSTATION ppt
In this presentation talk about:
Able to describe Substation.
Importance of substation.
Factors governing the selection of side.
Classification of Sub-Station.
Elements of a substation.
Operation of substation.
Hazards & safety.
Recent substation accident Bangladesh.
PPT ON 400KV GSS HEERAPURA JAIPUR
1) The document summarizes the practical training of an electrical engineering student at a 400kV grid substation in Heerapura, Jaipur.
2) The substation has a capacity of 250MVA and transforms high voltages from 400kV incoming feeders to lower 220kV voltages on outgoing feeders.
3) The student's training covered various electrical equipment used at substations including transformers, circuit breakers, relays, bus bars, insulators, and their purposes in the transmission and distribution of electrical power.
132kv Substation demo
The document provides a summary of the single line diagram of the 132kv S/S PGIA substation. It has 3 incoming 132kv lines from the 400/220kv Sarojini Nagar substation and 1 outgoing 132kv line. The incoming lines pass through lightning arrestors and insulated discs before connecting to the gantry and circuit breakers. The line then passes through potential transformers and current transformers before connecting to the main bus bar. From the bus bar, the line is distributed to the 132kv bay and transformers through isolators. The substation also includes a 33kv substation with 2 40MVA transformers, 33kv bus bars, and bays. It describes the purpose of components like capacitor banks, isol
Load Distribution
1. Substations are facilities that link power generation stations to transmission systems and distribution systems by increasing or decreasing voltage levels through transformers.
2. Key components of substations include power transformers, current and potential transformers, circuit breakers, isolators, earth switches, lightning arrestors, and wave traps.
3. Power transformers increase or decrease voltage to allow for efficient transmission of power over long distances and distribution to customers, while current and potential transformers adapt measurements to instrumentation.
A report on 220 kv gss mansarovar, jaipur by ravindra kumar goma
This document provides a seminar report on practical training completed at 220 kV G.S.S. Mansarovar, Jaipur. It includes an introduction to the substation, descriptions of its incoming and outgoing feeders, and sections covering various equipment found at the substation like bus bars, isolators, insulators, protective relays, circuit breakers, transformers, and earthing systems. The report also provides technical specifications and ratings for the main equipment.
ESI Electro Service India - Float Cum Battery Charger
This technical presentation provides an overview of float cum boost battery chargers used for standby applications. It discusses:
1) What a float cum boost battery charger is and its role in an uninterruptible DC power supply system.
2) The topologies of float cum boost battery chargers, including single and dual rectifier designs.
3) The technical specifications of thyristor-controlled float chargers, including input/output voltages, regulation, protections, and construction.
4) Salient features of thyristor-controlled float chargers like precise control, temperature compensation, automatic charging profiles, and modular design.
5) Present trends in converter technology moving from thyristor
Project List 1.3-May21,16- Substation Electrical Enginner
This document provides a list of notable power engineering projects and maintenance activities completed by Reza Shah Abadi. It includes several high voltage substation EPC projects providing power for copper mining complexes in Iran. It also lists several medium and low voltage EPC projects at the Sarcheshmeh Copper Complex involving switchgear, protection, automation, transformers, and expanding electrical distribution networks. High voltage transmission line PC projects in Iran are also mentioned. Finally, it lists some maintenance activities done in workshops such as rewinding large electromotor staters and transformers.
Presentation on 132/33KV BSPTCL(Bodhgaya Substation)
The document provides information about the 132/33kV Bodhgaya substation in Bihar, India. It discusses key components of the substation including three transformers ranging from 50-160 MVA, lightning arrestors, current and potential transformers, circuit breakers using oil, air, SF6 and vacuum technologies, isolators, capacitor banks, fuses, and bus couplers connecting generators and feeders to main and spare bus bars. The substation is part of the transmission network operated by Bihar State Power Transmission Company Limited.
Industrial training 220 KV moradabad
Monu Kumar completed an industrial training at a substation guided by Umesh Chand Bharti. The training covered the introduction of UPPTCL and the components of a substation including transformers, circuit breakers, capacitors, and control panels. Substations play an important role in the electricity network by converting voltages so that power can be delivered from generators to homes and workplaces.
What's hot (10)
A report on 220 kv gss mansarovar, jaipur by ravindra kumar goma
A report on 220 kv gss mansarovar, jaipur by ravindra kumar goma
ESI Electro Service India - Float Cum Battery Charger
ESI Electro Service India - Float Cum Battery Charger
Project List 1.3-May21,16- Substation Electrical Enginner
Project List 1.3-May21,16- Substation Electrical Enginner
Presentation on 132/33KV BSPTCL(Bodhgaya Substation)
Presentation on 132/33KV BSPTCL(Bodhgaya Substation)
Similar to Pete Scoffin CV
Biggie's CV1
This document is a curriculum vitae for Biggie Charuza that outlines his personal details, educational background, work experience, achievements, and references. It details that he has an O-Level in various subjects from Cambridge and qualifications in Electrical Engineering and Microcomputer Technology. His work experience includes positions as a Factory Maintenance Electrician at Denel and Electrical Supervisor at the Civil Aviation Authority Zimbabwe where he oversaw maintenance and repairs. It also lists his training in maintenance, electrical systems, and project involvement refurbishing an airport terminal.
cv-Simon-mccourt-19092016_1
Simon McCourt has over 30 years of experience in electrical contracting and commissioning. He has extensive skills in installation, testing, and commissioning of LV systems, life safety systems, generators, switchgear, and more. Currently, he works as a Senior Project Electrical Commissioning Engineer for Sidra Medical Centre in Qatar, commissioning and validating all essential electrical systems.
Curriculum Vitae
This curriculum vitae is for James Powell, an electrical engineer with over 20 years of experience in high voltage installation, testing, commissioning and maintenance. He has held various roles with increasing responsibility, currently serving as a Senior High Voltage Electrical Engineer. His experience includes working on numerous projects throughout the UK installing, testing and commissioning various high voltage electrical equipment up to 66kV. He manages a team of eleven electrical craftspeople and is responsible for their work planning and safety.
Gowtham resume
Electrical professional with 6 years of experience in O&M (Utility Plants & Substation) - Airport, IT Park
CURRICULUM VITAE Simon McCourt January 2015
This curriculum vitae outlines the qualifications and experience of Simon Paul McCourt, an electrical engineer based in the UK. It summarizes his educational background including an HND in mechanical and electrical engineering and various technical certifications. It also provides an overview of McCourt's extensive work experience over 25+ years as an electrical contractor and commissioning engineer on many commercial, industrial, and infrastructure projects in the UK and Qatar.
Simon cv
My standard of workmanship is considered to be very high and I take pride in my work. I have a sound knowledge of many and varied scopes of work in the electrical industry. I am apprentice trained, having attained HND and City & Guild level qualifications, having skills in all associated fabrication work, various cable and cable techniques, panel interpretation design and wiring experience of AC and DC Switch Gear, Power Factor Control, DC Drives, PLC, Generators, Compressors, Earthing Systems, UPS and IPS Systems, Fire Alarms, Emergency Lighting, Air Conditioning (HVAC), Refrigeration, CCTV, Exterior Lighting and Signage, Door Entry Systems, Alarms (Signal and Intruder), Data Communication, Industrial and Domestic Lighting, Power Distribution, Testing and Commissioning. Verification & validation of LV systems, Life safety systems.
Being a self-employed contractor for most of my working career to date, I am proficient at working in a variety of establishments including Hospitals, Steel & Rolling Mills, Fragmentation Plants, Cement Quarries, Aggregate Plants, Dockyards, Petro-Chemical Plants/Refineries, British Rail, Power Stations, Paper Mills, Commercial/Retail Buildings and Schools.
C 1 .V.
Haissal A. Ghamrawi is a Lebanese electrical engineer born in 1962. He has worked in electrical maintenance and commissioning for ADCO in Abu Dhabi since 1995, involved in projects across their fields. Prior to joining ADCO, he received an engineering degree in thermal power from Polytechnic of Odessa and ran his own electrical contracting business in Lebanon. He is trained in various electrical equipment, systems, and technologies including gas turbines, substations, switchgear, protection relays, and more.
ahmed Hamdy -Resume
Ahmed Mohamed Hamdy Ibrahim Moubarak is an experienced electrical engineer seeking a position with prominent organizations. He has over 15 years of experience in electrical design, project management, and power plant operations. Currently he is the Head of Electricity Section at ASGE in Jubail, where he oversees projects like O&M centers and building rehabilitations. Previously he worked as an electrical designer and site supervisor, and as an operations engineer at a power plant in Egypt. He has expertise in AutoCAD, Microsoft Office, and project management skills.
Curriculum Vitae-1 rev sept(r) 16 with photo
This document is a curriculum vitae for Shiv Ratan Sethia, an electrical engineer with over 27 years of experience in electrical power generation, distribution, and automation systems. It outlines his educational background in electrical engineering and provides details of his work experience managing electrical systems for various chemical and fiber plants in India and Indonesia. It also lists his areas of expertise, responsibilities, completed projects, and references.
Curriculum Vitae-1 rev sept(r) 16 with photo
This document is a curriculum vitae for Shiv Ratan Sethia, an electrical engineer with over 27 years of experience in electrical power generation, distribution, and automation systems. It outlines his educational background in electrical engineering and lists his extensive work experience managing electrical projects and maintenance at various chemical and fiber plants in India and Indonesia. It also provides details of his technical skills and responsibilities overseeing electrical systems, automation, and power plants.
Electrical-Machinery-Fundamentals.pdf
This document provides information about the fourth edition of the textbook "Electric Machinery Fundamentals" by Stephen J. Chapman. It includes details about the author's background and qualifications. The book is dedicated to the author's mother and contains brief contents, table of contents, and information about the publisher. It provides a high-level overview of the textbook's coverage of fundamental principles of electric machinery, transformers, power electronics, AC and DC machines.
Abhishek scada ppt
The document discusses a SCADA system for electrical distribution implemented by Jamshedpur Utilities and Services Company (JUSCO). JUSCO uses a SCADA system monitored from its Network Monitoring and Control Centre (NMCC) to automate power distribution. The document outlines various field equipment in the electrical distribution network like transformers, breakers, buses that are monitored by the SCADA system. It also discusses the communication infrastructure and control room setup used for the SCADA system.
Abhishek scada ppt
The document discusses a SCADA system for electrical distribution implemented by Jamshedpur Utilities and Services Company (JUSCO). JUSCO uses a SCADA system monitored from its Network Monitoring and Control Centre (NMCC) to automate power distribution. The document outlines various field equipment in the electrical distribution network like transformers, breakers, buses that are monitored by the SCADA system. It also discusses the communication infrastructure and control room setup used for the SCADA system.
CV Ahmed Elsayad
This document is a curriculum vitae for Eng. Ahmed Mohammed Elsayad, an Egyptian electrical engineer. It includes his personal details, education history graduating with a Bachelor's in Electrical Power and Machines in 2007. It also outlines his work experience including his current role as a Gas Turbines First Engineer at Khalda Petroleum Co since 2010 and previous construction engineering roles. His responsibilities and skills are described for maintenance, operation and project installation roles in power generation facilities.
INTRODUCTIONTOPOWERELECTRONICS.pdf
This textbook provides an introduction to power electronics over 8 chapters. It is intended for electronic engineering students in their second year of study or final year of an HND program. The textbook covers topics such as DC-DC choppers, AC-DC thyristor converters, DC-AC inverters, AC voltage regulators, DC link inverters, switched mode power supplies, and power electronic switches. It includes examples, self-assessment tests, and problems in each chapter. The material is sufficient to cover a 1-year course with an average of 3 contact hours per week or as a 20 credit modular course.
cvmjh2016
Michael James Haley is a Mechanical Electrical Instrumentation Control & Automation (MEICA) Engineer for Natural Resources Wales, where he manages and supervises planned maintenance of mechanical and electrical assets worth £250,000. He has over 30 years of experience in engineering, construction, and facilities maintenance. His qualifications include an NVQ 3 in Environment Conservation, HNC in Electrical & Electronic Engineering, and apprenticeships and certifications in electrical installation, safety, and engineering.
RAFOMOYO CV
Eanerst Rafomoyo is seeking a position as an electrical engineer or electrician. He has over 20 years of experience in electrical installations, maintenance, and repairs. He holds a Bachelor's degree in electrical engineering and various technical certificates. His most recent role was as an Engineering Project Manager where he implemented solar energy systems and oversaw electrical projects.
Resume Francis
Francis Sequeira is applying for an electrical technician position with over 16 years of experience as an offshore electrical technician on oil and gas platforms. His experience includes troubleshooting, preventative maintenance, and restoring power after outages on electrical equipment. He also has experience maintaining facilities and is computer literate and safety compliant. He has worked extensively with various electrical equipment including switchgear, motor controls, generators, transformers, and more. He is looking to use his skills and experience to help companies meet their missions.
Power electronics in practice
The document discusses power electronics engineering and its applications. It describes how power electronics emerged as a distinct engineering discipline around 1970 with the introduction of the SCR. The document then lists six main areas of focus for power electronics engineers, including power supplies, power semiconductor devices, motor drives, large power systems, electric transportation, and magnetics. It provides examples of industries that rely on power electronics expertise, such as computing, telecommunications, aerospace, industrial controls, automotive, and electric power.
Miniature prototype design and implementation of modified multiplier circuit ...
This document describes the design and implementation of a miniature prototype DC high voltage generator using a modified multiplier circuit. The circuit uses a low voltage AC input that is first rectified and then multiplied through four stages of the modified multiplier circuit to produce high DC output voltages. In the prototype, an input of 600V RMS AC yielded an output of 6185V DC, with an average voltage ratio of 10.76 and average ripple of 1.134% under no load conditions. The high DC voltages were measured using a digital storage oscilloscope through a voltage divider and recorded on a computer. The generator is intended for testing electrical insulation materials and could be developed into a higher voltage class impulse voltage generator.
Similar to Pete Scoffin CV (20)
Miniature prototype design and implementation of modified multiplier circuit ...
Miniature prototype design and implementation of modified multiplier circuit ...
Pete Scoffin CV
- 1. CURRICULUM VITAE NAME: PETER RICHARD SCOFFIN ADDRESS: 122 Roman Wharf Lincoln Lincolnshire. LN1 1SR. UK. TELEPHONE: UK CELL: 07774 870625 DATE OF BIRTH: 21st January 1953 NATIONALITY: British STATUS: Divorced Education and Qualifications 1980 Lincoln College of Technology HNC Endorsement – Electrical Machines 1975 – 1976 Wolverhampton Polytechnic HNC in Electrical and Electronic Engineering Additional subjects (Endorsements); High Voltage Transmission and Distribution of Elec. Energy. Environmental Engineering and Industrial Services. 1974 Lincoln College of Technology Part ONC 1 and ONC 2. Bridging course to HNC. 1973 People’s College of Further Education, Nottingham City & Guilds of London Institute. Electrical Installation Work Course C (51C). Passed with Credit. 1969 – 1972 Grantham Technical College, Lincolnshire City & Guilds of London Institute. Electrical Installation Work Course B (51B). Passed with Distinction. 1965 – 1970 Sincil Bank Boys School, Lincoln 7 GSE Passes: Grade 1: Physics, Technical Drawing, Art. Grade 2: Mathematics, English, Metalwork Grade 3: Geography
- 2. Page 2 of 3 Employment History August 1986 – Present Brush Electrical Machines Ltd, Loughborough (Service Department). Position: Senior Electrical Commissioning Engineer Supervising the installation, commissioning and troubleshooting all types of high voltage protection and control systems on distribution and rotating plant up to 120MW and 132kV. Locations include UK and overseas Refineries/Power Stations/Oil Rigs. Equipment familiar with includes: ● All types of Excitation/Synchronising/Power System Stabiliser Units. ( Analogue and Digital ) ● All types of high voltage/current protection relays, induction disc and solid state, including integral digital systems. ● Three phase voltage and current injection sets for both primary and secondary injection plus the use of phase shift equipment. ● Interfacing with PLC, DCS and all types of Prime Mover control systems. ● High voltage switchgear, Oil, Vacuum and SF6. ● Load Management Power Generation panels in particular the Brush Prismic System. Examples of commissioning projects: 1 GE/Pratt & Whitney/Siemens Gas Turbines driving Brush DAX type generator sets. Responsible for switchgear, transformers, black start controls and all protection/control. (worldwide) 2 Hawker Siddeley Power Engineering, commissioning combined cycle Power Station Corby. Frame 9 units including all the utility distribution system and interfacing to DCS. Completed High Voltage training course Dec. 2000. 1982 – 1986