SQU OF68 universal car emulator supports IMMO/Seat occupancy sensor/Tacho Programs. http://www.obdii365.com/wholesale/squ-of68-universal-car-emulator-mini-parts-big-works.html Move the original immobiliser signal Place the original immobiliser signal Place the ESL, enable the car to start ECK the EZS on the table ECK the correctness of the airbag system Art the tacho on the table The SQU OF68 emulator comes with 68 programs that are dedicated to hundreds of car models and types of ECU.

2. 5
5
9
13
15
17
17
21
21
25
25
25
25
29
29
33
39
42
54
70
72
91
97
100
104
109
117
121
130
130
151

3. 159
171
171
172
172
174
174
177

5. !

6. +

7. 8

9. <

36. 35

50. !=

55. !!

56. !+

57. !8

59. !<

60. +=

65. +!

66. ++

67. +8

69. +<

70. 8=

75. 8!

76. 8+

77. 88

79. 8<

80. 80
Back to the Contents
EDC 1-socket ECU
2.5TD 2.9TD 3.0TD
with mechanical and electronic ignition switch
C-class 2.5 TD
Sprinter 2.9 TD
E-class 3.0 TD
In early 1-socket ECU types, you need to find 24C02 memory marked as B58 or 24C04 memory
In address 38 and 39 write 2A 4E values and
in address 3F to 42 write 9C D4 13 56 values
Connecting emulator to EDC 1-socket ECU
CAN H and CAN L from the choke.
GND and power from diode.
If there are problems to start the car, add ACC onto pin 13 of ECU
(take it from second leg of diode). Then, cut off pin 13 from the ECU plug
Disconnect CAN from WSP!!!
You can buy our products and obtain technical support from our distributor. Find a
distributor near you by clicking on the link: www.carlabimmo.com/our-partners

90. <=

93. 93
Back to the Contents
In address 027 write 33 value in X24C02
eeprom
Connecting emulator to ECU
After connecting the emulator, you need to carry out personalization with HHT or Star Diagnosis
diagnostic tools. After starting the engine, you must run the car for 60 seconds for coding to be
completed.
You can buy our products and obtain technical support from our distributor. Find a
distributor near you by clicking on the link: www.carlabimmo.com/our-partners

95. <!

96. <+

97. <8

99. <<

124. 124
Back to the Contents
Find 5P08C3 memory
In address from 1E7 to 1E8
and from 1EE to 1EF write 00 00 values
Other EDC15 ECUs
You can buy our products and obtain technical support from our distributor. Find a
distributor near you by clicking on the link: www.carlabimmo.com/our-partners

125. 1,A