Newest SDP3 V2.31 for Scania VCI2 VCI3 Without USB Dongle for Scania for Trucks/Buses Support Win7 Win8 Win10 http://www.obdii365.com/wholesale/newest-scania-vci-sdp3.html

1. en-GB
Release Notes
Scania Diagnos & Programmer 3
Version 2.31
Version 2.31 replaces version 2.30 of Scania Diagnos & Programmer 3.
The program supports the following vehicles:
P, G, R, and S series (2016-)
P, G, R and T series (2003-)
F, K and N series
as well as the following engines:
P96
E2011

2. Information............................................................................................................................3
General new features............................................................................................................3
System requirements ........................................................................................................3
Function view ....................................................................................................................3
Troubleshooting ................................................................................................................3
Communication troubleshooting........................................................................................4
System specific news ...........................................................................................................4
CUI – Infotainment system.................................................................................................4
COO – Coordinator............................................................................................................4
EMS – Engine Management System .................................................................................4
RES – Rechargeable energy storage system ....................................................................4
TMS – Transmission management system........................................................................4
GMS – Gearbox management system...............................................................................5
CMS – Chassis management system................................................................................5
TSS/TSA – Tag axle steering system ................................................................................5
 Scania CV AB 2017

3. Information
• To be able to fully use the services in SDP3 you must have a
Certificate for services installed in your computer. For more
information about the certificate, see TIL > Scania Diagnos &
Programmer > Other information > Certificate for services in
SDP3.
• Demo files recorded by an SDP3 version older than the one you
are using have limited possibilities to show parameters.
General new features
System requirements
The document System requirements and recommendations for Scania
Diagnos & Programmer, SDP3 has been updated with information on the
following:
• Microsoft .Net Framework 4.6.2 must be installed.
• There is no longer support for Windows 7 32 bit. For more
information, see Ti 00-17 01 25.
Function view
By using the search box at the top of the window you can now search
directly in the function view. You can choose to search in the Adjustment,
Check or Calibration tab.
Troubleshooting
The flow for defect reports in SDP3 has been improved to make it simpler
to follow.
Instead of a guide in several steps, there is now a simple dialogue box. In
the dialogue box you can select if you want to save the defect report
locally or if you want to send it via e-mail. To be able to send the defect
report via e-mail you must have Microsoft Outlook. You can choose to
create a defect report for a specific product individual or to make a
general defect report.
The dialogue box for defect reports you find in the Help menu.
Note: As from SDP3 2.31, the dialogue box is no longer available for use
if you are connected to a job type.
 Scania CV AB 2017

4. Communication troubleshooting
• The document with instructions for communication errors has
been updated. You access the document via the Help menu.
System specific news
CUI – Infotainment system
• Support for resuming an interrupted download of software has
been introduced.
COO – Coordinator
• The new guide Verifying switch modules in the steering wheel
checks that switch modules in the steering wheel correspond to
the version according the vehicle’s SOPS file.
EMS – Engine Management System
• Vehicles with the S8 engine control unit have previously lacked
support for Default setting of power take-off adaptation. This has
now been rectified.
• The Spark check guide has been removed for vehicles of the P,
G, R and S series with Euro 6 gas engine. As the support in SDP3
has been improved, the guide tool is no longer required. Instead,
use the Electrical system view for troubleshooting.
RES – Rechargeable energy storage system
• For the sake of clarity and uniformity, the term hybrid battery has
been changed to propulsion battery in all instances in SDP3.
TMS – Transmission management system
• New parameters have be added to TMS2:
o Clutch monitoring
o Downhill speed control with active prediction
o Reduced use of the clutch (new values)
 Scania CV AB 2017

5. • After a product update of the transmission management system,
the Accelerometer adaptation guide must always be run. It now
starts automatically after an update of the control unit.
GMS – Gearbox management system
• A function guide which shows how the power is transferred in the
gearbox for different gears in real time has been added. You can
also see how the gear shift forks move and which sleeves are
affected.
The guide applies to the following gearboxes:
o GRS905
o GRS905R
o GRSO905
o GRSO905R
o GRSO925
o GRSO925R
o GRSO935
o GRSO936R
The guide also applies to the following transmission
management systems:
o OPC4,
o OPC5
o TMS1
o TMS2
CMS – Chassis management system
• A guide for bleeding control circuit 2 has been implemented.
• Circuits, I/Os and the functional description of differential locks
has been improved.
TSS/TSA – Tag axle steering system
• Function guides for activating and deactivating service mode have
been implemented.
 Scania CV AB 2017

6. • A function guide for checking EST and ESTA has been
implemented.
• A new parameter for the centring function has been implemented.
 Scania CV AB 2017