Have a look at this document by Nippon Paint Professionals guiding you with complete knowledge of total coating & construction solutions. They have a wide range of Protective & Architectural Coating suitable for the Interior, Exterior walls, Glass, Road, Roof, Tiles & Ceramic, waterproofing, wood & metal etc. For detailed info download this document–

16. Thick Bed Mortar
Cement/Sand ratio: 1:4 + PMP Cement
Additive 100gm (1 sachet to 1 bag 50kg
OPC) or alternatively
CMI Render
Concrete Wall
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Ceramic Tiles / Stones
Adhesive Bed
CMI TileFix 181 mix with CMI
Mortar Admix 380
CMI INSTALLATION SYSTEM FOR:
EXTERNAL FACADE
Notes: 1) Not to scale
2) Movement joint must be incorporated as per BS 5385: Part 1-4
CMI INSTALLATION SYSTEM FOR:
EXTERNAL GENERAL AREA (FLOOR)
Notes: Ensure to leave a movement joint of at least 6mm at perimeter between wall and floor and
when different material meets.
RC Slab
Homogenous Porcelain Tiles
Thick Bed Mortar
CMI FloorScreed 085 + water
Adhesive Bed
CMI TileFix 181 mix with CMI
Mortar Admix 380
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Tile / Stone
Timber
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Primer
CMI Mortar Bond 330
Adhesive Bed
CMI TileFix 181 mix with CMI
Mortar Bond 330
Notes: 1) Not to scale
2) Movement joint must be incorporated as per BS 5385: Part 1-4
CMI INSTALLATION SYSTEM FOR:
TIMBER
RC Slab
Finishes
New Tile / Stone
Ex-Ceramic Tile / Stone
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Ex-Mortar
Adhesive Bed
CMI TileFix 181 mix with
CMI Mortar Bond 330
Screeding
CMI INSTALLATION SYSTEM FOR:
EXISTING TILES
Notes: 1) Not to scale
2) Movement joint must be incorporated as per BS 5385: Part 1-4

17. CMI INSTALLATION SYSTEM FOR:
INTERNAL GENERAL AREA
Brick Wall
RC Slab
Adhesive Bed
CMI TileFix 181 mix with CMI
Mortar Admix 380
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Homogenous Porcelain Tiles
Thick Bed Mortar
Floor: CMI FloorScreed 085 + Water
Wall: Cement/Sand ratio: 1:4 + PMP
Cement Additive 100gm (1 sachet to
1 bag 50kg OPC)
Notes: 1) Movement joints shall be incorporated at perimeter
joint between floor & wall and where other
materials meet.
ALC Block
Adhesive Bed
CMI TileFix 181 mix with CMI Mortar Admix 380
(For Ceramic Glazed Tiles & Homogeneous Porcelain Tiles)
Ceramic Tile / Mosaic
CMI BlockFix 187 (ALC Thin Bed Adhesive)
Thick Bed Mortar
Floor: CMI FloorScreed 085 + Water
Wall: Cement/Sand ratio: 1:4 + PMP Cement
Additive 100gm (1 sachet to 1 bag 50kg OPC)
Grouting
CMI TileCrete 182 mix with CMI Mortar Admix
380 (Dilution 1:1 with clean water)
Primer
CMI Mortar Bond 330
CMI INSTALLATION SYSTEM FOR:
ALC BLOCK
Notes: 1) Not to scale
2) Movement joint must be incorporated as per BS 5385: Part 1-4
Thick Bed Mortar
Floor: CMI FloorScreed 085 + Water
Wall: Cement/Sand ratio: 1:4 + PMP
Cement Additive 100gm (1 sachet to 1
bag 50kg OPC)
Up
to
300
mm
CMI INSTALLATION SYSTEM FOR:
BATHROOM
Brick Wall
RC Slab
Waterproofing
CMI ProofCoat 087 (2 Coats)
Adhesive Bed
CMI TileFix 181 mix with
CMI Mortar Admix 380
Grouting
CMI TileCrete 182 mix with CMI
Mortar Admix 380 (Dilution 1:1
with clean water)
Homogenous Porcelain Tiles
Notes: 1) Movement joints shall be incorporated at
perimeter joint between floor & wall and where
other materials meet.
Angle Fillet
BILL OF QUANTITY (SAMPLE)
CMI INSTALLATION SYSTEM FOR:
SWIMMING POOL
RC Slab
Adhesive Bed:
CMI TileFix 181 + CMI Mortar Admix 380
Grouting:
CMI TileCrete 182 + CMI Mortar
Admix 380 (dilution 1:1 with clean water)
Movement joint by other to all internal
corners of wall
Glass Mosaic Tiles
Slurry bond coat:
1 part OPC to 1 part CMI Mortar Bond 330
(v/v) (without dilution)
Note:
1) Provide roofing shade for external application of waterproofing and tiling works
2) Movement joint according to BS 5385: Part 1-4
Fiberglass netting by others embedded into
waterproofing at floor wall junction extended 100mm
Angle Fillet
Waterproofing:
CMI ProofCoat 087 (2 Coats)
Thick Bed Mortar:
Floor: CMI FloorScreed 085 + Water
Wall : Cement/Sand ratio: 1:4 + PMP Cement
Additive 100gm (1 sachet to 1 bag 50kg OPC)

18. Thick Bed Mortar
Cement/Sand ratio: 1:4 + PMP Cement
Additive 100gm (1 sachet to 1 bag 50kg
OPC) or alternatively
CMI Render
Concrete Wall
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Ceramic Tiles / Stones
Adhesive Bed
CMI TileFix 181 mix with CMI
Mortar Admix 380
CMI INSTALLATION SYSTEM FOR:
EXTERNAL FACADE
Notes: 1) Not to scale
2) Movement joint must be incorporated as per BS 5385: Part 1-4
CMI INSTALLATION SYSTEM FOR:
EXTERNAL GENERAL AREA (FLOOR)
Notes: Ensure to leave a movement joint of at least 6mm at perimeter between wall and floor and
when different material meets.
RC Slab
Homogenous Porcelain Tiles
Thick Bed Mortar
CMI FloorScreed 085 + water
Adhesive Bed
CMI TileFix 181 mix with CMI
Mortar Admix 380
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Tile / Stone
Timber
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Primer
CMI Mortar Bond 330
Adhesive Bed
CMI TileFix 181 mix with CMI
Mortar Bond 330
Notes: 1) Not to scale
2) Movement joint must be incorporated as per BS 5385: Part 1-4
CMI INSTALLATION SYSTEM FOR:
TIMBER
RC Slab
Finishes
New Tile / Stone
Ex-Ceramic Tile / Stone
Grouting
CMI TileCrete 182 mix with
CMI Mortar Admix 380
(Dilution 1:1 with clean water)
Ex-Mortar
Adhesive Bed
CMI TileFix 181 mix with
CMI Mortar Bond 330
Screeding
CMI INSTALLATION SYSTEM FOR:
EXISTING TILES
Notes: 1) Not to scale
2) Movement joint must be incorporated as per BS 5385: Part 1-4