1. Call 1-877-353-MILL (6455)
www.classifiermillingsystems.com • 35 Van Kirk Drive, Unit 17 • Brampton, ON L7A 1A5 • Canada • P (905) 456-6700 F (905) 456-0076
Copyright 2013 Classifier Milling Systems Inc.
We offer our clients viable
cost-effective solutions
CLASSIFIER MILLING SYSTEMS (CMS) is an
industrial minerals/materials and environmental
solutions company. We offer clients viable cost-
effective equipment and raw materials process
solutions to achieve high-level production efficiencies.
As designers and engineers of processing solutions
to diverse industries, along with our history of
designing, manufacturing, installing and servicing
critical industrial process systems for many Fortune
500 companies, we have learned and applied best-of-
all practices, positioning CMS as an emerging global
leader in materials processing and handling solutions
for a broad base of industrial minerals an materials as
well as environmental materials.
Our involvement in mining, basic materials, power
and energy, agricultural, carbon and metallurgical
industries and environment has given us high-level
exposure to a wide diversity of complex materials
formulations and process solutions. With a history of
hands-on involvement and collaboration with clients
and strategic partners, it is that experience that has us
readily recognize that many solutions we achieve in a
particular
industry often serves as the basis for advanced and
differentiated solutions in another industry.
CMS has engineered a new series of enhanced
systems and materials solutions for Flue-Gas
Desulfurization, including engineered systems and
materials based solutions for mercury control and
acid gases treatment, as well as process solutions for
metallurgical carbon products and numerous new
and evolving raw materials enhancements for basic
industry.
Hands-on involvement
and collaboration with
clients
The fundamental value proposition of CMS is
its consistent track record of providing superior
customized materials process solutions on a cost-
effective basis.
If you are interested in hearing more about
the science behind these systems and materials
solutions feel free to contact a CMS representative.
CMS honors non-disclosure/non-circumvention
agreements with all of its clients and all of our
clients are assured the confidentiality of their project
or business requirements are fully protected by CMS.
Todd Vanderhart
President & CEO Classifier Milling Systems Corp
FGD - FLUE GAS DESULFURIZATION

2. CURRENT CUSTOMER BASE
Industries using Sodium Sorbents include:
• Coal-fired Utilities
> Treating SO3
- “Blue Plume”
> SO2
control
• Glass Producers
• Industrial – Cement, Chemical, Ethanol,
Gold recovery
• HCI control
> Medical Waste Incinerators
> Secondary Metal Smelters
> Biomass
•HF Control
> Ceramic Tile
> Fluorine Processors
•Pulp and Paper
WHAT CAN DSI ACHIEVE?
• SO2
removal >98%
• SO3
removal to less than measurable
• HCI removal >99%
• Enhanced mercury removal
> Better utilization of activated carbon
> Removal of SO3
interference
• ESP resistivity improvements
TYPICAL CAPITAL COSTS
• Silo, blowers, controls, lines, splitters,
lances, mill
• Large systems with rail unloading and
milling about $10 to $15 million (8-10
TPH)
• Utility scale systems designed for truck
unloading $3 to $8 million (1-5 TPH)
• Industrial scale systems $0.5 to $3 million
(<1 TPH)
• Milling adds to the capital cost but
reduces the operating cost
• May vary based on site installation costs
SUMMARY
* Dry Sodium Sorbent Injection using trona
or sodium bicarbonate is a cost effective
way to mitigate HCI, SO2
and SO3
.
• Low capital cost.
• Small footprint
• Short installation time.
• Compatible with ESP and Baghouses
* Able to achieve high removal rates for
HCI (>99%) and SO2
(>90%).
• Meet the HCI limit in both the proposed
Utility MACT (0.002 lb/MMBtu) and the
Industrial Boiler MACT (0.022 lb/MMBtu)
* Effective over a wide temperature range
(275˚F - 1500˚F).
* Has been implemented at hundreds
of sites in the United States and
Europe including Industrial sites, waste
incinerators, and coal-fired power plants.
Call 1-877-353-MILL (6455)
FGD - FLUE GAS DESULFURIZATION
www.classifiermillingsystems.com • 35 Van Kirk Drive, Unit 17 • Brampton, ON L7A 1A5 • Canada • P (905) 456-6700 F (905) 456-0076
Copyright 2013 Classifier Milling Systems Inc.