2. JAPAN BLOC
NORTH
AMERICA
BLOC
SOUTH
AMERIC
A BLOC
EUROPE-AFRICA-
MIDDLE EAST BLOC
ASIA/OCEANIA BLOC
Canada
USA
Ohio
Alabama
Mexico
Columbia
Brazil
Peru
Nigeria
UK
Morocco
Mauritius
Spain
France
Turkey
Italy
Australia
Indonesia
Malaysia
Thailand Philippines
Taiwan
China
India
Pakistan
Vietnam
1
2
3
5
6
4
HONDA worldwide operation
3. Cars
HONDA Jet
Power Products
• Leading Company in Mobility Business
• Product range from Motorcycles to Aircraft
• Future technologies - Robots, Fuel Cell Cars etc.
• Focus on Environment Friendly Technologies
Motorcycles
1949
1953
1963
2000
2004
Asimo
Fuel Cell Car
2008
HONDA history
7. 5 S:
5S is a method for achieving and sustaining efficiency and effectiveness
through organization and standardization in the workplace
8. KAIZEN :- "change for the best"
When applied to the workplace, kaizen refers to activities that
continually improve all functions, and involves all employees
from the CEO to the assembly line workers.
10. PRODUCTION FLOW
WHERE;
AE: ASSEMBLY ENGINE
CQA: COMPLETE QUALITY ASSURANCE
CBU: COMPLETE BUILD UNIT
POPA: PLASTIC OBJECT AND PAINT APPLICATION
11. The Blank sheets of metal are received from RPSC. These Blank sheets of metal have a
thickness between 0.65 to 0.70 mm. There are two lines for the production of stamped
parts. The whole production process is automatic and is carried out with the help of robots.
A View Of Press Shop
Press Shop
Stamping die used in forming of sheet
metal
12. The Al department is responsible for development of all the aluminum parts,
for example the engine block and the engine head. CNC lathes and machining
tools like grinding wheels etc. are used.
Petrol Engine Block Manufactured in AL Shop
AL Shop
13. Connecting rod and crank shaft are manufactured in FE Shop.
There are two different production lines for con rod and crankshaft
Connecting Rod Crankshaft
FE Shop
14. The missions are made for two types of engines, diesel and petrol, with each
gear box having its own identification. The diesel model can be identified by
the presence of a single line on the main shaft while the petrol gear box has
two lines on the main shaft.
Mission- A Subassembly Of Gear arrangement in gear
box
MISSION SHOP
15. PAINT SHOP
Paint Application
The main objectives of the Paint Division are to provide
vehicles with a high gloss, attractive, colorful finish, with a
long term durable resistance to corrosion.
17. AF SHOP (FRAME ASSEMBLY)
Frame assembly is the last part of the production line.
Parts from various shops are received,assembed dand
Finished cars drive out of the AF shop.
21. Assembly :-
Assembly is whole unit of subassembly
Subassembly :-
Subassembly is part of assembly
Sub assembly
Assembly
22. Assembly
●Combination number of parts
or subassemblies put together
to perform a specific function,
and capable of disassembly
without destruction.
What may be an assembly at
one point, however, may be a
subassembly at another.
Sub-Assembly
A unit assembled separately
but designed to fit with other
units in a manufactured
product
Example :
Piston sub assembly
PISTON SUBASSEMBLY
ASSEMBLED ENGINE
24. Block Line:- This is the First Line in which the Cylinder
Block Loading , Piston Insertion , Crankshaft Installation ,
Flywheel Installation , Starter Motor Installation ,
Cylinder Head Docking etc. are take place. It consists of
Station No. 1 - 21 .
Bare Line :-This is the Second Line in which the Rocker
Arm Installation, Fuel Pipe Installation , Connecting Pipe
Installation , Cam Chain Installation , Spark Plug
Installation , Mission Docking , etc. take place . It
Consists Of Station No. 22-42
OHC Line :- This is the Last Line in which the Alternate
Current Generator Installation, AC Compressor, HAC
Belt, etc are take place . It consists of Station No. 43-53
26. Conveyors used
Pallet
Side out trolley
Manipulator
MBC Tightening machine
Sealant application machine
Pnuematic tools-For fastening purpose
Torque wrench
Sensors
Couplers
Wire harnesses
27. Belt type
Conveyor belts are used in a wide variety of material
transport applications such as manufacturing, food
processing, and heavy industry.
This conveyor is used in block and bare line
28. Overhead Conveyor
An overhead conveyor is an elevated system similar to a floor-level
conveyor belt that is used to transport items throughout a facility. Unlike a
conveyor belt, which is belt-driven, an overhead conveyor is driven by a
chain and is considerably thinner.
29.
30. Pallet is used to load the engine & carrying from one work
station to other station for assembly.
Jig Locating
pins (4 nos) of
palletPrimary (base)pallet
32. Side out trolley is used for taking out ‘Engine with pallet’ from conveyor in case
any problem with engine or any specific work to be done
33.
34. Since the main objective of a sealant is to seal assemblies and
joints, sealants need to have sufficient adhesion to the
substrates and resistance to environmental conditions to
remain bonded over the required life of the assembly.
35. Basic Requirement
・Provide mechanism to ensure the balance during component lift.
・Parts Weight 100Kg
・Revolution Angle 300 Degree (Attach adjustable
function)
・Revolution diameter 1500mm~2000mm
・Low & high range
・Installation Height 2000mm
・Provide mechanism to easily install the jig, attachment etc.
Manipulator is used for picking the component from one specified place & place
at specified place
37. Accuracy ± 15%
Torque setting Possible
Operator dependency Less
Torque transmission through oil pulse
(piston mechanism)
Application: Tightening bolt by pressing press button
Pulse unit
Trim
valve
Shut-off system
Air motor
Air
supply
in
Press
button
Socket for bolt
39. Clicker torque wrenches signal when the desired
amount of torque is reached by emitting an
audible click
A tool for setting and adjusting the tightness of nuts and bolts to a desired value.
a) Clicker Torque Wrench
c) Open Torque Wrench
b) Dial Torque Wrench
Open torque wrench are also clicker type ,it has
open arrangement for holding Nut or bolt
A dial torque wrench is typically used as a
quality control instrument to verify or
monitor torque. The dial torque wrench can
be used for joint testing, auditing or
verification of torque applied.
41. OXYGEN SENSOR:
IT IS INSTALLED ABOVE THE CATALYTIC CONVERTOR AND USED
TO VERIFY THE BREATHING OF THE ENGINE. IT DETERMINE
WHETHER THE FUEL IS RICH OR LEAN. THEN SEND SIGNAL TO
E.C.U WHICH CONTROLS THE FUEL AIR MIXTURE ACCORDINGLY.
SENSORS
OXYGEN SENSOR
MAP SENSOR:
MAP STANDS FOR MANIFOLD ABSOLUTE PRESSURE AND
SENSOR IS USED TO PROVIDE THE INFORMATION OF MANIFOLD
PRESSURE TO E.C.U, WHICH IS NECESSARY TO CALCULATE AIR
DENSITY AND TO DETERMINE AIR MASS FLOW RATE, WHICH IN
TURN USED TO CALCULATE APPROPRIATE FUEL FLOW.
MAP SENSOR
FUNCTION OF PART:
42. ENGINE COOLANT TEMPERATURE SENSOR:
THIS SENSOR IS INSTALLED ON THE REAR SIDE
OF CYLINDER HEAD AND IS USED TO SEND
TEMPERATURE INFORMATION TO E.C.U BY
DETERMINE THE COOLANT TEMPERATURE OF
AN ENGINE.
TP SENSOR:
TP STANDS FOR THROTTLE POSITION AND SENSOR IS USED TO
DETERMINE THE THROTTLE VALVE POSITION. THE SIGNAL IS
USED BY E.C.U. AS IGNITIION TIMING AND FUEL INJECTION
TIMING DEPENDS UPON THE POSITION OF THE THROTTLE VALVE.
THROTTLE POSITION
SENSOR
ENGINE COOLANT TEMPERATURE
SENSOR
43. Coupler: Coupler mean connecting device & will handle multiple.
Terminal B is designed to prevent dislocation, & will not allow disconnection even it is
pulled
Coupler -B
Coupler- A
Multipoint
Handling of couplers
1. Couplers should be inserted fully
2. When disconnecting couplers, always
remove locks.
3. Couplers with lock should be checked to see
that locks are completely fixed
4. Insure the couplers are covered completely
5. Always grasp the main body of couplers
44. Terminals are used for connecting electrical circuits and male, female parts in pair
Terminals are used at place where fitting & removal can be easily accomplished
-connection by terminals are bonding of conductors & cause contact resistance
Terminal A
Terminal B
Handling of connectors
1. Do not use wire harness that are worn
2. Before connecting confirm that the connector cover
is not torn & female terminal is not open wide.
3. Insure the cover of terminal
4. Wire harness should be arranged so that ,there are
no slack& tension
Terminals
45. 1.Cleanliness (Before
assembly)
The part that is going to
assemble must be clean,
free from dust, dent ,burr
&damage on its surface.
Example: Sealant application
area.
2.Lubrication (while assembly)
Some parts requires oil application during assembly,
it works as prilubrication.
Example: Piston ring assembly.
-while fitment of metal &journals engine oil must be
applied
SPRAY CLEANING CLEANING WITH CLOTH
LUBRICATION
46. 3.Freeness (After assembly)
After fitment assembly to be checked
for freeness(no jam rotation)
Example: Crankshaft rotation, piston
ring rotation
4.Assembly confirmation (After
assembly)
After application of torque, assembly must
be identified by paint colour,on its bolt
CRANK ROTATION
CHECK
PROCESS
CONFIRMATION
47. 5.Torque application :
-While giving torque ,hold the
torque wrench,as shown in
picture.
Socket point above the bolt
should be hold by left hand
Corner of the torque wrench
should be hold by right hand
Clik Sound: as the specified set
torque value reaches, auditable
click sound with feel will come ,
means torque is applied
-Do not over tight ,after click
sound