1. Version 7.0.0.5
Conexant Systems, Inc. This document is generic for Windows
XP/2000/2003/Vista/Windows7. 32bit and 64bit drivers.
There are two different audio driver packages. One works on Windows Vista and
Windows 7. One works on Windows XP/2K/2003.
You must use the correct driver package to match your operating system
Note 1: On Windows Vista and Windows 7 the Microsoft audio function driver
installs by default. Running the audio
installation procedure below will replace the Microsoft driver with the Conexant
audio driver.
Note 2: On Windows XP and Windows 2000 (and early versions of 2003) you need to
install a QFE to allow an HD Audio driver
to install. This QFE is made available by Microsoft, and it is required to
update Operating System components before
installing the audio driver. The QFE contains the required files and a readme
which outlines installation procedure.
This QFE and these files are distributed by Microsoft only; please contact them
directly if you need to get them. The
QFE's may be included in the latest Service Packs for some Operating systems.
Note 3: Microsoft DirectX 9.0 or later is required
INSTALLATION AND REMOVAL INSTRUCTIONS:
Installation or Update of Conexant audio Driver
Note 1: It is best to remove any previously installed audio driver from the
system before installing a new driver.
Note 2: On XP/2000/2003 Operating systems if Windows detects the audio device
hit Cancel then proceed to Step 1.
1.
Browse to the Conexant driver files location and double click setup.exe
2.
The Installation wizard will guide you through the installation.
3.
Restart the system when done.
Removal of the Conexant audio Driver
1. Click on Start -> Settings -> Control Panel or click on Start -> Control
Panel (depending on OS).
2. Double-click on the Add/Remove programs icon (called Programs And Features
in Windows Vista and Windows 7).
3. Click on Conexant driver item from the list and select "Remove" or
"Uninstall"
4.
Restart the system when done.

2. Running an Unattended (Silent) Installation
1. From the task bar, click on Start -> Run
2. In the Run dialog box, type X:pathsetup -s (where X is the path to the
audio driver files)
3.
Restart the system when done.
Running an Unattended (Silent) Uninstallation
1. From the task bar, click on Start -> Run
2. In the Run dialog box, type X:pathsetup -s REMOVE (where X is the path to
the audio driver files)
3.
Restart the system when done.
***********************************************************************
This driver is built for the Microsoft(R) Windows Operating Systems.
Copyright 2009 Conexant Systems, Inc. All rights reserved.
***********************************************************************