Amphibic Machine

1. AMPHIBIOUS VESSEL ( AMPHIBEX )
BEACH, RIVER, LAKE AND SEA COASTAL CLEANING MACHINE
Amphibious vessel and machine that has many advantages.
The basic machine can be equipped with a complete set of tools.
Amphibex can cut and collect garbage, trash, aquatic weed and reed growth, dredge, excavate,
clean up oil spills and much more.
The amphibious nature of machine combined with low ground pressure allow it to operate in
sensitive areas without damage to the environment.
The smart connector on the lift arm makes it easy to change the different tools;
 Harvester and cutter units
 Collection rakes
 Excavator unit
 Dredge pumps
 Fumigation unit
 Oil spill clean-up units
 Hydraulic hammer
 Propeller drive
 Trailer
The weight distribution makes it possible to carry various weights on land y in the water.
No other machines, like a crane is needed for loading or unloading into the water.
The machine can be operated by one single person.
- Lower operation costs
- Less damage to surroundings
- The rubber tracks leave little or no damage to the surface

2. AMPHIBIOUS VESSEL (BEACH – ALGAE & SARGASSUM & WEED COLLECTION)

3. HARVESTING AND CUTTING AQUATIC VEGETATION / BUSHES & REED

4. EXCAVATOR
Excavator arm is well adapted for cleaning inflow and outflows to rivers, lakes, digging
works in canals, ditches, beaches around bridges, cable laying, etc.

5. DREDGING AND UNDERWATER MUD CLEANING
Dredge Pump
Suction dredging
in pure sand or
mud is performed
with a suction
tube which is
mounted in the
inlet of the pump.

6. The strong construction of the rake
makes it the perfect tool to choose
when cleaning the shore and lifting
heavier objects. The strong forks can
lift stones, trees and plants with roots
and other material found along the
shoreline and bottom of the lake. The
forks can be adjusted to reduce the
work width.
Hydraulic Piling
Amphibious has hydraulic power to operate Hydraulic hand tools.
Hydraulic hammer is a tool used to dismantle cement etc. We
also use hammer for driving piles for poles, plastic sheeting etc.
Bucket / Log Grabs
Amphibious the teeth of the buckets have cutting
properties that facilitate excavation. The grip
bucket and log grab are used in along shore
lines to remove plant roots, tree limbs and trash.
Lifting Rake

7. Propeller
Increases the travel speed in water. For use on large lakes or
long waterways where the Amphibious is required to travel
greater distances to the work site. Speed : Approx. 4 knots
Sweeping Rake
It allows the operator for easily and quickly tool exchange and sweeps
algae, trash, etc.
Hydraulic Hammer
Amphibious has
hydraulic power to
operate Hydraulic
hand tools.
Hydraulic hammer is
a tool used to
dismantle cement,
small rocks, etc.

8. DISINFECTION FUMIGATION SYSTEM

9. OIL SPILL DISPERSANT SPRAYING SYSTEM
OIL RECOVERY SKIMMER SYSTEM
The lightweight construction makes it particularly
valuable for beach clean‐up, shoreline operations
around piers and jetties, as well as in ports, rivers, and
inland waters. Its the rapid removal of oils or other
liquids from the water surface.
The systems are designed for spraying the application of diluted
or concentrated dispersant from Spray Arms over the affected oil
spill area completely for faster reaction and the oil is broken into
smaller droplets.

10. Trailer (Transportation)
The trailer is a trailer specially adapted for
transporting the machine. Guide rails facilitate the
loading and unloading of the machine.
Dimensions: 5.2 m x 2.1 m x 0.60 m
AMPHIBIOUS MACHINE
Trash and Garbage Collection Rakes
The collection rake is a specially adapted for collecting trash / garbage in the coastal waters.