1. MATERIAL DATA SHEET
TedMet®
I Jack is a metal jacket with DuPont™ Tedlar®
laminated on the topside.
Tedlar is a polyvinyl fluoride (PVF) film and is factory applied to the metal using an inno ve
process developed by BS Stainless Limited.
TedMet’s high emissivity property helps in thermal process to ensure lower surface
temperature which improves personnel safety on-site. TedMet also exhibits ex abrasion
and weather resistance pr along with high resistance to chemical attack, making it an
ideal jacketing system to be used outdoors in areas of extreme weather conditions.
The film thickness is 1.5mil (37.5 μ).
Most common base metals for TedMet are Stainless Steel and Aluminium. Other metals are available as
per pr profiles are also available in TedMet.
Safety:
There are no known health risks in handling TedMet. For more details on safety, please refer to
TedMet MSDS available on our website.
TedMet is also available with a range of or the underside of the jack
DryMet moisture barrier to prevent galvanic corrosion of the jack
Polyester paint or other
SoundM or eff with ISO 15665
BS Stainless Limited - 360 Leach Place, Walton Summit, Preston, PR5 8AS
Tel: +44 (0) 1772 337555 | +44 (0) 1772 313010 | Email: info@bsstainless.com
www.bsstainless.com TedMet®
is a registered trademark of BS Stainless Limted
a range of for the undersides also available with aTedMet is
prevent galvanic corrosion of the jackmoisture barrier to pDryMet m
int systems based on the specifica oter paint or other paiPolyest
g for eff e noise insu
Tedlar®
MetalMetal
l coM k gSoundM