Fiber optic distribution boxes are used to protect and house fragile fibre splices and joints between cables. They can also be used to house splitters and patch connectors of splitters with fibre optic cables. FDB200G16CORE can be used as fibre optic splice enclosures or fiber terminal box.

1. 16 Core Fiber Optic Distribution Box
Configuration
Material Size Max Capacity Nos of PLC Nos of Adaptor Weight Ports
Strengthen
Polymer Plastic 385*240*155
Splice 96 Fibers
(4trays,24 fiber/tray)
PLC Splitter
2 pcs of 1x8
1 pcs of 1×16
16 pcs of SC(max) 3.8kg
Applications
Wall mounting and pole mounting installtion
FTTH pre-installation and filed installation
4-7mm cable ports suitable for 2x3mm indoor FTTH drop cable and outdoor figure 8 FTTH self-supporting drop cable
Standard Accessories
Splice cassette and cable management tool,
installation nuts and bolts, protection sleeves,
hose clamp, cable tube, wreach, cover holder,
rubber seal for cable entrance.
Optional Accessories
Wall-mounted iron plate
1. Total enclosed structure.
2. Material: PP, wet-proof, water-proof, dust proof, anti-aging, protection level
up to IP68.
3. Clamping for feeder cable and drop cable, fiber splicing, fixation, storage
distribution ... etc all in one.
4 . Cable, pigtails, patch cords are running through own path without
disturbing each other, cassette type SC adaptor installation, easy
maintenance.
5. Distribution panel can be flipped up, feeder cable can be placed in a cup-
joint way, easy for maintenance and installation.
6 . Box can be installed by the way of wall-mounted or poled-mounted,
suitable for both indoor and outdoor uses.
2 in 24 out
Description
This box is used as a termination point for the feeder cable
to connect with drop cable in FTTX communication network
system.
It intergtates fiber splicing, splitting, distribution, storage and
cable connection in one unit. Meanwhile, it provides solid
protection and management for the FTTX network building.
Features
A*B*C(mm)
S
k
y
p
e
:
z
h
o
u
g
u
i
f
e
n
g
1
2
@
y
a
h
o
o
.
c
o
m
FDB200G16Core

2. Applications
Wall mounting and pole mounting installtion
FTTH pre-installation and filed installation
1 input cable port for un-cut cable from diameter from10~17.5mm. 2 output cable ports for cable diameter from
8~17.5mm.16 output cable ports for cable diameter less than 4mm.
Installation instruction
Open the closure
Install the un-cut cable
Protect the un-cut cable
Introduce the cut cable into the
splice tray
Install the fiber closure
Strip the cable
Splice and store fibers
Close and seal the closure
Fixing cables
S
k
y
p
e
:
z
h
o
u
g
u
i
f
e
n
g
1
2
@
y
a
h
o
o
.
c
o
m