The document discusses the design process for concept vehicle called the Infinity XS. It explores various front, rear, side, and profile ideations with the goal of creating a premium compact vehicle for Infinity. The final design integrates the grill and light areas into a single shape at the front. Overall, the design was meant to have a simple yet elegant surface inspired by technology, while appealing to young buyers seeking status.
52. using vinyl to change the color combination but keeping
the surface simple and clean to understand this was the
first development, and also keeping fangs on the bonnet to
give an aggressive expression.
removing the bonnet fangs and adding more of an
aggressive front towards the lights and grill that carries on
towards the ground personally this was my favorite
ideation but modeling would have significant problems, and
it wasn't the simplest form to use.
FRONTAL IDEATION
53. again the idea was to keep the proportion the same but
the change minor parts of the frontal area, by adding cuts
and small curvature to see that it would look like but to
also have similar DNA design input from infiniti range.
my final ideation that i was happy with and getting
feedback on what to change on the previous ideation i
chose to keep the fins on the side where it would taper
toward the light then carry on down near the bottom
wheel arch, this interoperation gave me a good idea as it
would help with aero dynamics but also a new trend for
infiniti as it give an simple form and keeping the car looking
aggressive.
INFINITI XS
54. REAR IDEATION
Developing a rear end was a difficult approach as i wanted
to keep the styling similar to the front and DNA of infiniti
styling, my first instinct was the lift the plate holder above
the bumper as i personally prefer this which has similar
inputs from the qx30 concept.
After careful feedback I decided to remove the large area
bumper as it didn't go with the clean flowing theme of the
vehicle, i decided to keep the current bumper styling but to
add some slits on each side, and include the plate holder
but inverting the angle.
55. My approach for this ideation was the make the car look
and feel as wide as possible, to remove the plate input gave
more of a conceptual feel, having a large black area i could
play around and it could been used as a screen for other
driver info and other kinds of advertisements.
so the final ideation came from all three ideation inputs,
adding simple clean form, but also having a matching
combination from the front initial ideation, i choose to
keep the slits but adding more character to this that would
connect front each side. removing the plate holder gave a
clean feel to the rear end.
INFINITI XS
56. SIDE PROFILE IDEATION
Keeping the profile and simple wasn't and understatement
as i wanted to make this vehicle look premium to the
market but with feedback, the idea was to add additional
panels, to give a more interesting form to the side profile
having the lower side skirt that bridged around the wheel
arches.
57. SIDE PROFILE IDEATION
trying out new ideas for the middle section similar to
infinities design language with a opposite direction air
intake. removing the cut line from the rear lights and adding
a fin line that carried on towards the front grill.
removing most of the form changes towards the front and
rear, but playing around with the side profile this would
give a good play around with color and trim and the rear
spoiler carried down towards the front wheel arch but
feedback was that it looked like 2 separated cars.
INFINITI XS