The document describes the development of a new device to measure the coordinates of a string's plumb line using a laser beam and scanning system instead of existing devices that rely on CCD arrays. The new device aims to achieve equal or better measurement accuracy at a lower cost by replacing the CCD array with a laser emitter/receiver, motor, and mirror prism scanning system.

1. DEVELOPMENT OF A DEVICE
MEASURING THE COORDINATES FOR
THE STRINGS PLUMB LINE

2. MEASURING DEVICE STRING PLUMB LINE
COORDINATES
A laser beam is falling on
a string is dissipated as a
result on matrices formed
peaks of intensity
corresponding to the
coordinates of the current
string in the space

3. INTENSITY PEAKS GENERATED BY THE
MATRICES

4. MY TASK IN COMPARISON
Unlike existing devices,
I am developing a
device measuring the
coordinates of the string
without the use of CCD
arrays. For this purpose,
this device will be used
scanning system
founded on the laser
emitter / receiver, motor
and mirror prism.

5. MY HYPOTHESIS
 This device may allow a measurement accuracy of
coordinates is not worse than existing devices, and
may even help improve the accuracy of these
coordinates. As well as reducing the cost of the
device due to rejection of the CCD array.

6. THE END