1. JUAN A. HURTADO PHD
4
PUBLICATIONS
T. Dalrymple, J.A. Hurtado, I. Lapczyk, and H.R. Ahmadi, “Parallel Rheological Framework to model the
amplitude dependence of the dynamic stiffness in carbon-black filled rubber”, Constitutive Models for
Rubber IX – Marvalová and Petriková (Eds), 189-195 (2015)
J.A. Hurtado, I. Lapczyk, and S.M. Govindarajan, “Parallel Rheological Framework to model non-linear
viscoelasticity, permanent set, and Mullins effect in elastomers”, Constitutive Models for Rubber VIII –
Gil-Negrete and Alonso (Eds), 95-100 (2013)
V.S. Sokolinsky, K.C. Indermuehle and J.A. Hurtado, "Numerical simulation of the crushing process of a
corrugated composite plate”, Composites: Part A, 42, 1119-1126 (2011).
S.M. Govindarajan, J.A. Hurtado and W.V. Mars, "Simulation of Mullins effect and permanent set in filled
elastomers using multiplicative decomposition”, Constitutive Models for Rubber V – A. Boukamel, L.
Laiarinandrasana, S. Méo and E. Verron (Eds) 249-254 (2007)
I. Lapczyk and J.A. Hurtado, "Progressive damage modeling in fiber-reinforced materials", Composites:
Part A, 38, 2333-2341 (2007)
K. Bose, J.A. Hurtado, M.F. Snyman, W.V. Mars, and J.Q. Chen, “Modelling of stress softening in filled
elastomers,” Constitutive Models for Rubber III – Busfield and Muhr (Eds), Swets & Zeitlinger, Lisse, 223-
230 (2003).
K-S Kim and J.A. Hurtado, "Length-Scale Effects in Nano- and Micro-Mechanics of Solids," Key Engineering
Materials, vol. 183, 1-8 (2000).
K-S Kim, J.A. Hurtado and H. Tan, “Evolution of surface-roughness spectrum caused by stress in
nanometer-scale chemical etching”, Physical Review Letters, 83, 3872-3875 (1999).
J.A. Hurtado and K-S Kim, “Transitions of shear resistance in a single-asperity contact”, in Fracture and
Ductile vs Brittle Behavior − Theory, Modeling, and Experiment, Materials Research Society Symposium
Proceedings, vol. 539, MRS, Warrendale, PA, 81-92 (1999).
J.A. Hurtado and K-S Kim, “Scale effects in friction of single-asperity contacts: Part II, Multiple-dislocation-
cooperated slip”, Proc. R. Soc. Lond. A, 455, 3385-3400 (1999).
J.A. Hurtado and K-S Kim, “Scale effects in friction of single-asperity contacts: Part I, From concurrent slip
to single-dislocation-assisted slip”, Proc. R. Soc. Lond. A, 455, 3363-3384 (1999).
J.A. Hurtado and L.B. Freund, “The force on a dislocation near a weakly bonded interface”, Journal of
Elasticity, 52, 167-179 (1998).
J.A. Hurtado, “Elastic Plastic Mode III Crack under Internal Shear”, International Journal of Fracture, 91,
205-216 (1998).
J.A. Hurtado, “Estudio de fibras de forma laminar en un campo de tensión uniforme: grietas, anti-grietas
y cuasi-grietas”, in Anales de Mecánica de la Fractura, Proceedings of the XIV Encuentro del Grupo
Español de Fractura, vol. 14, 105-110 (1997).
J.A. Hurtado, J. Dundurs and T. Mura, “Lamellar inhomogeneities under uniform stress: cracks, anticracks
and quasicracks”, in The Johannes Weertman Symposium, TMS, Warrendale, PA, 235-236 (1996).
J.A. Hurtado, J. Dundurs and T. Mura, “Lamellar inhomogeneities in a uniform stress field”, Journal of the
Mechanics and Physics of Solids, 44, 1-21 (1996)
J. Weertman and J.A. Hurtado, “HRR Mode I crack tip field revisited with dislocations”, in
Micromechanics of Advanced Materials, TMS, Warrendale, PA, 79-85 (1995).
J.A. Hurtado, E.R. de los Rios and A. Morris, “Crack Deflection in Al-Li Alloys for Aircraft Structures”,
Proceedings of the 18th Symposium of the International Committee on Aeronautical Fatigue, Melbourne,
Australia. EMAS, 107-136 (1995).
J.A. Hurtado and J. Weertman, “Non-Redundant Dislocation Density Field of a Circular Bar Deformed in
Torsion and the Stress Gradient Hardening Effect”, physica status solidi, (a) 149, 173-186 (1995).

2. JUAN A. HURTADO PHD
5
J.A. Hurtado, B.R. Elliott, H.M. Shodja, D.V. Gorelikov, C.E. Campbell, H.E. Lippard, T.C. Isabell and J.
Weertman, “Disclination grain boundary model with plastic deformation by dislocations”, Materials
Science and Engineering, A190, 1-7 (1995).
J.A. Hurtado and J. Weertman, “Dislocation Density Field-Stress Field relationships for non-uniform
elastic-plastic deformation”, Philosophical Magazine, A68, 599-604 (1993).
CONFERENCE PAPERS
S. Puri, J.A. Hurtado, D. Datye, G. Dasari, K. Searles and P. Sanz, “Simulation of Hydraulic Fracturing of
Unconsolidated Sands using Fully Coupled Poro-Elastoplastic Models”, 2015 SIMULIA Community
Conference, 2015.
I. Lapczyk, and J.A. Hurtado, “A viscoelastic-elastoplastic finite strain framework for modeling polymers”,
Proceedings of the ASME 2014 International Mechanical Engineering Congress & Exposition,
IMECE2014, Montreal, Quebec, Canada, 2014.
M. Chinnakonda, J. Yao, P. Saraswat, J.A. Hurtado, V. Oancea, S. Sett and T. Verbruggen, ”Concurrent
determination of musculoskeletal kinetics, kinematics, and detailed deformation measures of soft
tissues using Finite Element Analysis and Process Integration tool”, CMBBE 2014, Amsterdam,
Netherlands, October 13-15, 2014.
J. Yao, P. Saraswat, M. Chinnakonda, R. Bertucci, V. Oancea, J.A. Hurtado and S. Sett, ”Using Abaqus and
Isight to Simultaneously Determine Muscle Forces, Joint Kinematics and Strain/Stresses in Soft Tissues
during Walking”, 7th World Congress of Biomechanics, Boston, MA, July 6- 11, 2014.
K. Li, B. Nandi, J.Yao, R. Bertucci, J.A. Hurtado and V. Oancea, “Coupled Eulerian-Lagrangian Analysis of
Needle Insertion into Biological Soft Tissue Accounting for Material Rupture”, 7th World Congress of
Biomechanics, Boston, MA, July 6-11, 2014.
V. Kaul, J. Yao and J.A. Hurtado, “Three Dimensional Anisotropic Hyperelastic Microstructural Material
Model for Collagenous Tissues”, 7th World Congress of Biomechanics, Boston, July 6-11, 2014.
M. Chinnakonda, P. Saraswat, J. Yao, V. Oancea, J.A. Hurtado and S. Sett, “Generating Kinetmatically
Consistent Data for Musculoskeletal Inverse Dynamic Analyses using Finite Element Tools”, 37th Annual
Meeting of the American Society of Biomechanics, Omaha, Nebraska, September 4-7, 2013.
P. Saraswat, J. Yao, M. Chinnakonda, V. Oancea, J.A. Hurtado and S. Sett, “Results Repeatability of Right
Leg Finite Element Based Musculoskeletal Modeling”, XXIV Congress of the International Society of
Biomechanics, ISB 2013, Natal, Rio Grande do Norte, Brazil, August 4-9, 2013.
J. Yao, P. Saraswat, M. Chinnakonda, A. Tumuluri, J.A. Hurtado, V. Oancea and S. Sett, “A
Computationally Efficient and Accurate Lumbar Spine Model”, Proceedings of the ASME 2013 Summer
Bioengineering Conference, Sunriver, Oregon, USA, June 26-29, 2013.
K. Bose, J.A. Hurtado, S. Krishna and L. Xia, “Validation of cohesive-zone based mixed-mode
formulations in Abaqus”, USNCCM12, U.S. National Congress on Computational Mechanics, Raleigh, NC,
July 2013.
A. Colletti, P. Carlucci, N. Dan and J.A. Hurtado, “Validation of VUEOS in Abaqus/Explicit and Application
to Noble-Abel and Mie-Grüneisen Equations of State”, 2013 SIMULIA Community Conference, 2013.
I. Lapczyk, J. A. Hurtado, and S. M. Govindarajan, “A Parallel Rheological Framework for Modeling
Elastomers and Polymers”, 182nd Fall Technical Meeting of the Rubber Division, American Chemical
Society, Cincinnati, OH 1840-1859, 2012.
J.A. Hurtado and S.M. Govindarajan, “Advanced Simulation of Nonlinear Elastic Materials” , NAFEMS
World Congress 2009, Crete, Greece, June 16-19, 2009.
H. Lobo, and J.A. Hurtado, “Characterization and Modeling of Non-linear Behavior of Plastics”, 2006
Abaqus User’s Conference, 2006.
S. Becz, J.A. Hurtado, and I. Lapczyk, “Analyisis of barely visible impact damage for aerospace
structures”, 16th International Conference on Composite Materials (ICCM16), Kyoto, Japan, 2007.

3. JUAN A. HURTADO PHD
6
K. Bose , J.A. Hurtado, B.E. Engelmann , D.D. Fox , H. Harkness , Y.Y. Lu, and L. Xia, “Modelling of
Progressive Damage and Failure in Abaqus: General Framework”, NAFEMS World Congress 2005, St
Julians, Malta, May 17-20, 2005.
INVITED TALKS
“Modeling material damage and failure with Abaqus”, 12
th
MIT Workshop on Experimental and
Computational Fracture Mechanics, organized by the MIT Impact and Crashworthiness Laboratory (ICL),
October 28, 2015.
“Advances in fracture and failure modeling with Abaqus”, MIT Workshop on Computational Fracture
Mechanics, organized by the MIT Impact and Crashworthiness Laboratory (ICL), October 7, 2004.
“Scale effects in friction of single-asperity contacts”, Yale University, Department of Mechanical
Engineering, New Haven, Connecticut, February 9, 2000.
“Scale effects in friction of single-asperity contacts”, Society of Engineering Science (SES99), Austin,
Texas, October 25, 1999.
“Transitions of shear resistance in a single-asperity contact”, Materials Research Society Fall Symposium,
Boston, Massachusetts, December 3, 1998.
“Scale effects in friction of single-asperity contacts”, University of Illinois at Urbana-Champaign,
Department of Theoretical and Applied Mechanics, Urbana, Illinois, May 5, 1999.
“Scale effects in friction of single-asperity contacts and stress-driven roughness evolution during chemical
etching”, Dartmouth College, Thayer School of Engineering, Hanover, New Hampshire, July 12, 1999.