Expand the lifespan of your batteries: lead sulfate is removed by the electrical high-frequency pulsation process of the battery reconditioner. Rejuvenate your battery!

1. Battery Regeneration
Revival Battery Clinic++ Solution

2. 1) Do you want to save your battery life ?
2) Do you want to save your money ?
3) Do you want to save our earth ?
4) Do you want to save our next generation ?
5) Do you want to go green ?

3. Introduction
 As many as 70% to 80% of lead-acid batteries are replaced
prematurely due to the sulphation that occurs on lead plates
regardless of maintenance. Sulphation is an electrochemical
reaction that occurs when a battery is discharged.
 During normal use or in storage, a battery’s sulfuric acid is active
between the plates. This reaction creates energy in the form of
electric current.
 It also transforms the acid’s chemical composition that is in
contact with the lead plates, forming a solid residue (lead sulfate).
 This continual sulfate accumulation accelerates the weakening
process and finally “suffocates” the battery.

4. EFFECTS OF SULPHATION
 Sulphation reduces the electrolyte concentration –
Thus the cell voltage is also reduced.
 As sulphation increases, the internal resistance
increases – Added heat generation produces a
marked rise in temperature.
 These higher temperature further accelerates in dry-
out processes – culminates in the early failure of a
battery.
Sulphated Plate
Cont….

5.  General lack of capacity (deliverable power).
 An increase in battery temperature while charging or
discharging.
 A strong odor of hydrogen gas while charging or discharging.
 An excessive use of water and a rapid rise in battery voltage
while charging (stops the charger).

6.  Following recommended battery maintenance procedures may
keep your batteries operational for the typical 5 to 7 years of
standard battery life.
 The earlier you treat a battery, the better. The battery will
maintain its health and will have an even longer service life.
 The newer the battery, the more likely you can double, triple or
even quadruple its expected service life. Note – the battery
must be functional.
 Physically damaged batteries or batteries with dead cells cannot
be treated with our process.
 Battery regeneration is a procedure that returns a sulfated
battery to its original and normal condition.
 REVIVAL Battery Clinic ++ regenerates sulphated batteries
utilizing an electro-chemical sulphation reversion process.
HOW TO REDUCE SULPHATION ?...

7.  Sulphation of the internal plates rises resistance in the battery
making it impossible to work to its full potential.
Our REVIVAL Battery Clinic ++ Regenerator successfully reverse
the sulphation process, converting lead sulphate crystals back
into active matters by applying a very high frequency pulse in
several steps. This process restores battery capacity, giving you
the ability to still use old and sulphated batteries and extend the
life of your energy assets.
 REVIVAL Battery Clinic ++ cleans and maintains battery plates
and separators by dissolving lead sulfate crystals.
 During the de-sulphation treatment, the sulphate residue melts
slowly and progressively returning to the battery’s acid.
How REVIVAL Battery Clinic ++ works ?...

8.  REVIVAL Battery Clinic ++ restores the battery plate composition
and improves performance allowing the battery to operate at its
optimum capacity, often well beyond its original specifications.
 REVIVAL Battery Clinic ++ “Regenerator" uses cutting edge
technology to send a specially controlled pulsing DC current into
the battery.
 The current pulses convert battery-killing sulphate crystals back
to liquid molecules in the electrolyte. The battery stays in top
condition and its lifespan is dramatically extended.

9. WHY REVIVAL Battery Clinic ++ ?...
 Reduces the capital and operational expenditure.
 Improves battery performance and efficiency. Reduces charging
time and increases working time between charging.
 Increase in the workers productivity.
 Reduction of electric consumption.
 Increase of Life Expectancy shifts from an average of 4 to 8 years,
ensuring the battery capacity > 70% during the 8 years.
 Most professional piece of technology available in today's market
to service batteries: multi voltage, multi chemistry, Discharging,
charging, bad cell detection, software, reports....
 Process from finish to start maximum 30-40 hours and a
fully detailed report in pdf, word or excel on the results.

10.  REVIVAL Battery Clinic ++ has become the dedicated brand
name of Revival Engineers specialized in
battery regeneration with many happy and returning customers.
 Our REVIVAL Battery Clinic ++ is specifically designed to analyze
and regenerate all types of lead acid batteries; we have very nice
references in different industry sectors.
 Regeneration is very popular and becomes a real asset
management tool because 80 percent of the batteries breaking
down and losing capacity are sulphated and can be restored with
the right treatment.
 Our REVIVAL Battery Clinic ++ can also be used for annual
maintenance which strongly extends the lifespan of the
batteries.
With our Repulse technology we can do what others cannot
provide: to prove the results after regeneration.

11. REVIVAL Battery Clinic ++ equipment is a combo of a regenerator and
discharger . The voltage, current, time and temperature are all
monitored throughout the whole process and the data can be
transferred wireless to your computer. With this data, a full report on
the battery’s condition can be made with our software.
The regeneration process should be started with a fully charged
battery.
Our REVIVAL Battery Clinic ++ regenerates the battery in several
steps. Starting with a discharge, followed by regeneration,
equalization, another discharge and ending with another regeneration
mode.
The Process

12.  After the whole process the data of Discharge 1 and 4 can be
compared, making it easy to see the difference in capacity and internal
resistance of the battery before and after.
(Please take a look at the added file called “Results Regeneration” for
more info on how to analyze the results).
 We even go one step further. If combined with our
optional Battery Monitoring System, we are capable of detecting
which cell in your battery bank is the one causing the battery to run
down too fast. The BMS system permits to monitor the voltage of each
individual cell every three minutes during charge and discharge. This is
giving you the ability to make a full analysis of the battery up to cell
level. The measurements are stored fully automatic, which means
the regenerator and BMS work autonomously and do not have to be
supervised while regenerating a battery.

15. Before After

16. Regenerating batteries keeps
them out of the landfill…
So our planet stays greener!

17. Thank You